Author Topic: P-47 preview  (Read 1324 times)

Offline Kev367th

  • Platinum Member
  • ******
  • Posts: 5290
P-47 preview
« on: August 12, 2005, 05:55:05 AM »
Still got paintchips and a few little things left to do

AMD Phenom II X6 1100T
Asus M3N-HT mobo
2 x 2Gb Corsair 1066 DDR2 memory

Offline SkyChimp

  • Parolee
  • Gold Member
  • *****
  • Posts: 2214
P-47 preview
« Reply #1 on: August 12, 2005, 06:08:14 AM »
Step area doesn't look right looks like you did a blob and blurred it.

(Edit) again the chipping around nose panel lines don't look right:p

Offline SkyWolf

  • Nickel Member
  • ***
  • Posts: 599
P-47 preview
« Reply #2 on: August 12, 2005, 07:28:55 AM »
Looks pretty sweet to me.

Offline Kev367th

  • Platinum Member
  • ******
  • Posts: 5290
P-47 preview
« Reply #3 on: August 12, 2005, 09:09:07 AM »
Tried a slightly different way of wing weathering (no chips yet),
comments?

AMD Phenom II X6 1100T
Asus M3N-HT mobo
2 x 2Gb Corsair 1066 DDR2 memory

Offline SkyChimp

  • Parolee
  • Gold Member
  • *****
  • Posts: 2214
P-47 preview
« Reply #4 on: August 12, 2005, 09:21:06 AM »
Yup step area :D

Offline SkyChimp

  • Parolee
  • Gold Member
  • *****
  • Posts: 2214
P-47 preview
« Reply #5 on: August 12, 2005, 09:25:27 AM »
Well i've been working on a few effects. If u trust me send me a copy if you don't send me a copy of bmp.:aok

Offline Kev367th

  • Platinum Member
  • ******
  • Posts: 5290
P-47 preview
« Reply #6 on: August 12, 2005, 09:28:48 AM »
Bmp is prob all that would work, PSP file is 35mb+!!!!!!!.

Hope you have broadband 1mb bmp

« Last Edit: August 12, 2005, 09:33:43 AM by Kev367th »
AMD Phenom II X6 1100T
Asus M3N-HT mobo
2 x 2Gb Corsair 1066 DDR2 memory

Offline Mustaine

  • Parolee
  • Platinum Member
  • ******
  • Posts: 4139
P-47 preview
« Reply #7 on: August 12, 2005, 09:54:36 AM »
have to say i love what you did with the cowl flaps, and how they sort of look "open"

great job on the rivets too.... did you use multiple dots (1 black 1 white)?
Genetically engineered in a lab, and raised by wolverines -- ]V[ E G A D E T ]-[
AoM DFC ZLA BMF and a bunch of other acronyms.

Offline Kev367th

  • Platinum Member
  • ******
  • Posts: 5290
P-47 preview
« Reply #8 on: August 12, 2005, 09:59:50 AM »
Thanks
Cowl flaps only done one side at the moment.

All about exagerating certain things to ger a simulated 3d effect. For eg the ailerons, trim tabs (done usian gaussian blur of solid line).

Rivets are 3 seperate single dot layers.

1) Black rivets
2) White rivets
3) Copy of white rivets run over with an eraser brush set to 25%. Do multiple passes you get left with the effect of some being lighter than others. (looks like paint worn off them). Set opacity slightly higher than the original white layer.

Can't remember who first thoguht of it, someone here, but it looks great.

Paint chips is the bit I haven't quite got the hang of yet.
« Last Edit: August 12, 2005, 10:07:17 AM by Kev367th »
AMD Phenom II X6 1100T
Asus M3N-HT mobo
2 x 2Gb Corsair 1066 DDR2 memory

Offline Mustaine

  • Parolee
  • Platinum Member
  • ******
  • Posts: 4139
P-47 preview
« Reply #9 on: August 12, 2005, 10:16:11 AM »
Quote
Originally posted by Kev367th
Thanks
Cowl flaps only done one side at the moment.

All about exagerating certain things to ger a simulated 3d effect. For eg the ailerons, trim tabs (done usian gaussian blur of solid line).

Rivets are 3 seperate single dot layers.

1) Black rivets
2) White rivets
3) Copy of white rivets run over with an eraser brush set to 25%. Do multiple passes you get left with the effect of some being lighter than others. (looks like paint worn off them). Set opacity slightly higher than the original white layer.

Can't remember who first thoguht of it, someone here, but it looks great.

Paint chips is the bit I haven't quite got the hang of yet.
how did you offset them?

IE like this:

..
.


or .. then one "under" the others?
Genetically engineered in a lab, and raised by wolverines -- ]V[ E G A D E T ]-[
AoM DFC ZLA BMF and a bunch of other acronyms.

Offline Kev367th

  • Platinum Member
  • ******
  • Posts: 5290
P-47 preview
« Reply #10 on: August 12, 2005, 10:45:16 AM »
I do them one rivet, two space, another rivet - .  .  .  .  .  .
Then the white one ares offset one diagonally with the corners touching the black corners, if that makes sense.
AMD Phenom II X6 1100T
Asus M3N-HT mobo
2 x 2Gb Corsair 1066 DDR2 memory

Offline Mustaine

  • Parolee
  • Platinum Member
  • ******
  • Posts: 4139
P-47 preview
« Reply #11 on: August 12, 2005, 10:59:27 AM »
i guess i am not gettin it....

imagine this is a a zoom in of 3 1 pixel rivets

is this how you are poisitioning them?



if not can you provide an example?

thanks
Genetically engineered in a lab, and raised by wolverines -- ]V[ E G A D E T ]-[
AoM DFC ZLA BMF and a bunch of other acronyms.

Offline Kev367th

  • Platinum Member
  • ******
  • Posts: 5290
P-47 preview
« Reply #12 on: August 12, 2005, 11:07:41 AM »
Like this, imagine zoom in also



Rivet, 2 spaces, rivet.
AMD Phenom II X6 1100T
Asus M3N-HT mobo
2 x 2Gb Corsair 1066 DDR2 memory

Offline Mustaine

  • Parolee
  • Platinum Member
  • ******
  • Posts: 4139
P-47 preview
« Reply #13 on: August 12, 2005, 11:17:58 AM »
where's the 3rd "erased" white one then?
Genetically engineered in a lab, and raised by wolverines -- ]V[ E G A D E T ]-[
AoM DFC ZLA BMF and a bunch of other acronyms.

Offline SkyChimp

  • Parolee
  • Gold Member
  • *****
  • Posts: 2214
P-47 preview
« Reply #14 on: August 12, 2005, 11:24:24 AM »
Only 2 dots he makes 3 copies and on one he erases to make them fade :D Can i have that text layer for 38g :)