Author Topic: Carrier Hanger Loadout Bug (Read 290 times)

Sundiver · « **on:** November 14, 2005, 11:40:45 AM »

I saw it mentioned about a year ago, with no followup so here it is again.

When in a carrier hanger you cannot change the loadout on aircraft or GV's. It looks as if you're zoomed in to close. Pictures to follow.

System Specs:
System Information report written at: 11/14/05 12:32:41
System Name: DADS
[System Summary]

Item   Value
OS Name   Microsoft Windows XP Professional
Version   5.1.2600 Service Pack 2 Build 2600
OS Manufacturer   Microsoft Corporation
System Name   DADS
System Manufacturer   MSI
System Model   MS-7032
System Type   X86-based PC
Processor   x86 Family 15 Model 28 Stepping 0 AuthenticAMD ~1601 Mhz
BIOS Version/Date   American Megatrends Inc. Version 07.00T, 4/2/2001
SMBIOS Version   2.3
Windows Directory   C:\WINDOWS
System Directory   C:\WINDOWS\system32
Boot Device   \Device\HarddiskVolume1
Locale   United States
Hardware Abstraction Layer   Version = "5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)"
User Name   DADS\Dad
Time Zone   Eastern Standard Time
Total Physical Memory   8,192.00 MB
Available Physical Memory   715.87 MB
Total Virtual Memory   2.00 GB
Available Virtual Memory   1.96 GB
Page File Space   1.65 GB
Page File   C:\pagefile.sys

Name   RADEON 9550 (Omega 2.6.75a)
PNP Device ID   PCI\VEN_1002&DEV_4153&SUBSYS_04021002&REV_00\4&83D6234&0&0008
Adapter Type   ATI display adapter AGP (0x4E54), ATI Technologies Inc. (Omega 2.6.75a) compatible
Adapter Description   RADEON 9550 (Omega 2.6.75a)
Adapter RAM   256.00 MB (268,435,456 bytes)
Installed Drivers   ati2dvag.dll
Driver Version   6.14.10.6575
INF File   oem22.inf (ati2mtag_RV350 section)
Color Planes   1
Color Table Entries   4294967296
Resolution   1280 x 1024 x 60 hertz
Bits/Pixel   32
Memory Address   0xB0000000-0xBFFFFFFF
I/O Port   0x0000C800-0x0000C8FF
Memory Address   0xCFEF0000-0xCFEFFFFF
IRQ Channel   IRQ 16
I/O Port   0x000003B0-0x000003BB
I/O Port   0x000003C0-0x000003DF
Memory Address   0xA0000-0xBFFFF
Driver   c:\windows\system32\drivers\ati2mtag.sys (6.14.10.6575, 1.29 MB (1,350,144 bytes), 7/18/2005 9:36 PM)

http://www.explicit-designz.net/freehost/files/10/ahss1.JPG
http://www.explicit-designz.net/freehost/files/10/ahss6.JPG
http://www.explicit-designz.net/freehost/files/10/ahss7.JPG

OOZ662 · « **Reply #1 on:** November 17, 2005, 10:53:16 PM »

Just to resolve this; the "hanger" gets destroyed with the carrier. If the carrier is sunk, you must go to another field to select ammo and fuel loadout before coming back and launching.

Sundiver · « **Reply #2 on:** November 18, 2005, 07:47:12 AM »

Quote

Originally posted by OOZ662
Just to resolve this; the "hanger" gets destroyed with the carrier. If the carrier is sunk, you must go to another field to select ammo and fuel loadout before coming back and launching.

So then, just to be clear: The fact that no matter what carrier I choose, no matter what map or arena it is in, no matter if I choose a carrier right after a map has been put up or reset thus no carrier has been sunk yet. I still get exactly the same issue with the "zoomed" or "enlarged" view and the fact that it only began happening for me after the 2.06 release. This has to do with a carrier having been sunk?

The enlarged view is exactly the same no matter what. It may be specific to my system, in which case it's not a bug. Let me know and I'll move the thread over to technical support.

OOZ662 · « **Reply #3 on:** November 18, 2005, 01:48:54 PM »

Your screenshots look exactly like my hanger has since AHII came out.

outbreak · « **Reply #4 on:** November 18, 2005, 06:46:12 PM »

same here, Hangar looks the same its normal, BUT i am unable to Select and Loadouts upon a CV that is NOT sunk. all i can do is select the aircraft or GV and launch.