« previous next »
Pages: [1] 2   Go Down

Author Topic: Help with voice!!  (Read 1053 times)

Offline Holly83

  • Silver Member
  • ****
  • Posts: 1234
Help with voice!!
« on: May 23, 2006, 11:19:20 AM »
I still have the same problem with voice. All the other game sounds work perfectly, I have tried the reset command, and I don't have any problem with recording my voice in Windows. I also have reinstalled the whole program and it still didn't seem to fix the problem. I used to use voice all the time before one of the updates, so I know it's worked in the past.

 I'm considering signing up for MA, but I want to fix this problem first.  Someone please help!
Logged

Offline Flatbar

  • Nickel Member
  • ***
  • Posts: 621
Help with voice!!
« Reply #1 on: May 23, 2006, 06:40:20 PM »
Check out your keymap. IIRC, one of the patches changed the keymap by adding a feature. If the new feature, I can't remember what it was, defaulted to what you had mapped as the mic toggle there may be your problem.

Hope this helps
Logged

Offline OOZ662

  • Platinum Member
  • ******
  • Posts: 7019
Help with voice!!
« Reply #2 on: May 23, 2006, 06:56:53 PM »
Check to make sure that in Setup>Preferences>Voice all of the sliders are at the top.
Logged
A Rook who first flew 09/26/03 at the age of 13, has been a GL in 10+ Scenarios, and was two-time Points and First Annual 68KO Cup winner of the AH Extreme Air Racing League.

Offline Holly83

  • Silver Member
  • ****
  • Posts: 1234
Help with voice!!
« Reply #3 on: May 23, 2006, 07:22:10 PM »
I can't hear anyone and nobody can hear me...  Also, everything is at the top. Any other ideas? Skuzzy?
Logged

Offline NHawk

  • Silver Member
  • ****
  • Posts: 1787
Help with voice!!
« Reply #4 on: May 24, 2006, 06:53:07 AM »
Bring up the volume control panel. If you're in the "Play controls" make sure the Mute box under Microphone is checked. If it's there, click the "Advanced" button under microphone and check the "Microphone +20db Boost" box.

Now click Options and select Properties. Click the "Recording" option, make sure Microphone is checked and click OK. Again under "Microphone" check the "Select" box. Again, if it's there, click the "Advanced" button under microphone and check the "Microphone +20db Boost" box.

You SHOULD be good to transmit now.

So far as hearing everyone else, you should hear them if you hear all of the other game sounds. But, in any case a post of your system specs and the dxdiag output might help.
« Last Edit: May 24, 2006, 07:00:38 AM by NHawk »
Logged
Most of the people you meet in life are like slinkies. Pretty much useless, but still bring a smile to your face when you push them down the stairs.
-------------------------------
Sometimes I think I have alzheimers. But then I forget about it and it's not a problem anymore.

Offline Skuzzy

  • Support Member
  • Administrator
  • *****
  • Posts: 31462
      • HiTech Creations Home Page
Help with voice!!
« Reply #5 on: May 24, 2006, 07:07:03 AM »
If you cannot hear anyone, it could be a lot of reasons.  Are you behind a router?  If so, make sure the router is not blocking ports.  Also make sure the router supports UDP over NAT.  Many do not.  You can check this by putting your computer in the DMZ.  If it works, then the router does not support UDP over NAT properly.

{er NHawk's instructions, make sure your microphone is set to be the recording device in Windows.  There are some applications which will change this setting, without notifying you.  Aces High will not change settings in your computer.
Logged
Roy "Skuzzy" Neese
support@hitechcreations.com

Offline Elixir

  • Zinc Member
  • *
  • Posts: 25
Help with voice!!
« Reply #6 on: May 24, 2006, 09:31:32 AM »
I have the same sort of problem.. just a little different. i can trasmit fine.. but i cannot hear anyone. i hear their beep then the first spilt second of what they are trying to say.. then it cuts off.

It used to work fine.. i have updated firmware i have hard reset the router.. i have changed pc's..checked wireless.. and cables... i have tried a differesnt router.. and that makes it work..
so i believe its something in my router.. but i cant find it.. just started happening all of a sudden about 3 maybe 4 weeks ago at max.

any suggestions?
Logged

Offline Holly83

  • Silver Member
  • ****
  • Posts: 1234
Help with voice!!
« Reply #7 on: May 24, 2006, 11:40:38 AM »
Quote
Originally posted by NHawk
Bring up the volume control panel. If you're in the "Play controls" make sure the Mute box under Microphone is checked. If it's there, click the "Advanced" button under microphone and check the "Microphone +20db Boost" box.

Now click Options and select Properties. Click the "Recording" option, make sure Microphone is checked and click OK. Again under "Microphone" check the "Select" box. Again, if it's there, click the "Advanced" button under microphone and check the "Microphone +20db Boost" box.

You SHOULD be good to transmit now.

So far as hearing everyone else, you should hear them if you hear all of the other game sounds. But, in any case a post of your system specs and the dxdiag output might help.


I followed your directions for the mic. And Umm.... how do I post my system specs and the dxdiag output?

Quote
If you cannot hear anyone, it could be a lot of reasons. Are you behind a router? If so, make sure the router is not blocking ports. Also make sure the router supports UDP over NAT. Many do not. You can check this by putting your computer in the DMZ. If it works, then the router does not support UDP over NAT properly.

{er NHawk's instructions, make sure your microphone is set to be the recording device in Windows. There are some applications which will change this setting, without notifying you. Aces High will not change settings in your computer.


I have no idea if I have a router and also no idea how to put my computer in the DMZ... Sorry for not being more computer savvy.
Logged

Offline Easyscor

  • Plutonium Member
  • *******
  • Posts: 10922
Help with voice!!
« Reply #8 on: May 24, 2006, 02:03:07 PM »
The router they're talking about is a home or "Small Office Home Office" aka SOHO router you buy so you can give multiple computers access to the web and share files between your computers.  The SOHO router then usually connects to a DSL or cable modem.  fyi All the connecting cables are ethernet.
« Last Edit: May 24, 2006, 02:05:12 PM by Easyscor »
Logged
Easy in-game again.
Since Tour 19 - 2001

Offline Roscoroo

  • Plutonium Member
  • *******
  • Posts: 8424
      • http://www.roscoroo.com/
Help with voice!!
« Reply #9 on: May 24, 2006, 02:28:15 PM »
how do I post my system specs and the dxdiag output?


go to start /run/   type in  dxdiag

let it run , then clic on save
it will save a notepad file on ur desktop

copy and paste the 1st 1/4 of the file here... we need to see down thru the sound spacifics ... or email the whole thing to skuzzy and brib him (i hear he accepts cookies) :D
Logged
Roscoroo ,
"Of course at Uncle Teds restaurant , you have the option to shoot them yourself"  Ted Nugent
(=Ghosts=Scenariroo's  Patch donation

Offline Holly83

  • Silver Member
  • ****
  • Posts: 1234
Help with voice!!
« Reply #10 on: May 24, 2006, 09:46:26 PM »
In that case, I don't have a router... I only have one home computer connected to my dsl service.

Before I copy & paste my system specs.... Is there any info that might be confidential that I shouldn't post?
Logged

Offline Roscoroo

  • Plutonium Member
  • *******
  • Posts: 8424
      • http://www.roscoroo.com/
Help with voice!!
« Reply #11 on: May 25, 2006, 12:22:43 PM »
your computers "Name " is the only thing someone could try to use .
(i always edit mine )
Logged
Roscoroo ,
"Of course at Uncle Teds restaurant , you have the option to shoot them yourself"  Ted Nugent
(=Ghosts=Scenariroo's  Patch donation

Offline Holly83

  • Silver Member
  • ****
  • Posts: 1234
Help with voice!!
« Reply #12 on: May 25, 2006, 01:09:23 PM »
System Information
------------------
Time of this report: 5/25/2006, 13:05:52
       Machine name:
   Operating System: Windows XP Home Edition (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.050301-1519)
           Language: English (Regional Setting: English)
System Manufacturer: HP Pavilion 061
       System Model: DK218A-ABA A220N
               BIOS: BIOS Date: 04/21/03 18:01:22 Ver: 08.00.08
          Processor: AMD Athlon(tm) XP  2600+,  MMX,  3DNow, ~2.1GHz
             Memory: 448MB RAM
          Page File: 341MB used, 716MB available
        Windows Dir: C:\WINDOWS
    DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: None
     DxDiag Version: 5.03.2600.2180 32bit Unicode

------------
DxDiag Notes
------------
  DirectX Files Tab: No problems found.
      Display Tab 1: No problems found. DirectDraw test results: All tests were successful. Direct3D 7 test results: All tests were successful. Direct3D 8 test results: All tests were successful. Direct3D 9 test results: All tests were successful.
        Sound Tab 1: DirectSound test results: All tests were successful.
          Music Tab: No problems found.
          Input Tab: No problems found.
        Network Tab: No problems found.

--------------------
DirectX Debug Levels
--------------------
Direct3D:    0/4 (n/a)
DirectDraw:  0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay:  0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow:  0/6 (retail)

---------------
Display Devices
---------------
        Card name: NVIDIA GeForce4 MX Integrated GPU
     Manufacturer: NVIDIA
        Chip type: GeForce4 MX Integrated GPU
         DAC type: Integrated RAMDAC
       Device Key: Enum\PCI\VEN_10DE&DEV_01F0&SUBSYS_80C01043&REV_A3
   Display Memory: 64.0 MB
     Current Mode: 800 x 600 (32 bit) (60Hz)
          Monitor: hp f1503 Flat Panel Monitor
  Monitor Max Res: 1024,768
      Driver Name: nv4_disp.dll
   Driver Version: 6.14.0010.5216 (English)
      DDI Version: 9 (or higher)
Driver Attributes: Final Retail
 Driver Date/Size: 10/6/2003 15:16:00, 4246528 bytes
      WHQL Logo'd: Yes
  WHQL Date Stamp: n/a
              VDD: n/a
         Mini VDD: nv4_mini.sys
    Mini VDD Date: 10/6/2003 15:16:00, 1550043 bytes
Device Identifier: {D7B71E3E-42B0-11CF-9367-CAA002C2CB35}
        Vendor ID: 0x10DE
        Device ID: 0x01F0
        SubSys ID: 0x80C01043
      Revision ID: 0x00A3
      Revision ID: 0x00A3
      Video Accel: ModeMPEG2_A ModeMPEG2_B ModeMPEG2_C ModeMPEG2_D
 Deinterlace Caps: {212DC723-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(YUY2,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_MedianFilteri ng
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalSt retch
                   {212DC723-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_MedianFilteri ng
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalSt retch
         Registry: OK
     DDraw Status: Enabled
       D3D Status: Enabled
       AGP Status: Enabled
DDraw Test Result: All tests were successful.
 D3D7 Test Result: All tests were successful.
 D3D8 Test Result: All tests were successful.
 D3D9 Test Result: All tests were successful.

-------------
Sound Devices
-------------
            Description: NVIDIA(R) nForce(TM) Audio
 Default Sound Playback: Yes
 Default Voice Playback: Yes
            Hardware ID: NFORCE_VAD
        Manufacturer ID: 1
             Product ID: 100
                   Type: WDM
            Driver Name: nvapu.sys
         Driver Version: 6.14.0457.0000 (English)
      Driver Attributes: Final Retail
            WHQL Logo'd: Yes
          Date and Size: 10/22/2004 10:41:46, 413824 bytes
            Other Files:
        Driver Provider: NVIDIA Corporation
         HW Accel Level: Full
              Cap Flags: 0xF5F
    Min/Max Sample Rate: 200, 100000
Static/Strm HW Mix Bufs: 52, 48
 Static/Strm HW 3D Bufs: 48, 48
              HW Memory: 0
       Voice Management: No
 EAX(tm) 2.0 Listen/Src: Yes, Yes
   I3DL2(tm) Listen/Src: Yes, Yes
Sensaura(tm) ZoomFX(tm): No
               Registry: OK
      Sound Test Result: All tests were successful.

---------------------
Sound Capture Devices
---------------------
            Description: NVIDIA(R) nForce(TM) Audio
  Default Sound Capture: Yes
  Default Voice Capture: Yes
            Driver Name: nvapu.sys
         Driver Version: 6.14.0457.0000 (English)
      Driver Attributes: Final Retail
          Date and Size: 10/22/2004 10:41:46, 413824 bytes
              Cap Flags: 0x41
           Format Flags: 0xCC0

-----------
DirectMusic
-----------
        DLS Path: C:\WINDOWS\SYSTEM32\drivers\GM.DLS
     DLS Version: 1.00.0016.0002
    Acceleration: n/a
           Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
                  NVIDIA(R) nForce(TM) Audio, Software (Kernel Mode), Output, DLS, Internal
                  Microsoft MIDI Mapper [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                  Microsoft GS Wavetable SW Synth [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
        Registry: OK
     Test Result: Not run

-------------------
DirectInput Devices
-------------------
      Device Name: Mouse
         Attached: 1
    Controller ID: n/a
Vendor/Product ID: n/a
        FF Driver: n/a

      Device Name: Keyboard
         Attached: 1
    Controller ID: n/a
Vendor/Product ID: n/a
        FF Driver: n/a

      Device Name: Cyborg Graphite
         Attached: 1
    Controller ID: 0x0
Vendor/Product ID: 0x06A3, 0x0471
        FF Driver: n/a

Poll w/ Interrupt: No
         Registry: OK

-----------
USB Devices
-----------
+ USB Root Hub
| Vendor/Product ID: 0x10DE, 0x0067
| Matching Device ID: usb\root_hub
| Service: usbhub
| Driver: usbhub.sys, 8/4/2004 01:08:42, 57600 bytes
| Driver: usbd.sys, 8/29/2002 07:00:00, 4736 bytes
|
+-+ USB Human Interface Device
| | Vendor/Product ID: 0x06A3, 0x0471
| | Location: Cyborg Graphite
| | Matching Device ID: usb\class_03
| | Service: HidUsb
| | OEMData: 03 00 00 10 04 00 00 00
| | Driver: hidclass.sys, 8/4/2004 01:08:19, 36224 bytes
| | Driver: hidparse.sys, 8/4/2004 01:08:16, 24960 bytes
| | Driver: hid.dll, 8/4/2004 02:56:42, 20992 bytes
| | Driver: hidusb.sys, 8/17/2001 14:02:20, 9600 bytes
| |
| +-+ HID-compliant game controller
| | | Vendor/Product ID: 0x06A3, 0x0471
| | | Matching Device ID: hid_device_system_game
| | | OEMData: 03 00 00 10 04 00 00 00

----------------
Gameport Devices
----------------

------------
PS/2 Devices
------------
+ HP PS2 Keyboard (2K - 3)
| Matching Device ID: acpi\pnp0303
| Upper Filters: PS2
| Service: i8042prt
| Driver: i8042prt.sys, 8/4/2004 01:14:36, 52736 bytes
| Driver: kbdclass.sys, 8/4/2004 00:58:32, 24576 bytes
| Driver: PS2.sys, 6/4/2001 15:00:00, 14112 bytes
| Driver: ps2.bat, 10/16/2002 17:57:10, 81920 bytes
|
+ Terminal Server Keyboard Driver
| Matching Device ID: root\rdp_kbd
| Upper Filters: kbdclass
| Service: TermDD
| Driver: termdd.sys, 8/4/2004 03:01:07, 40840 bytes
| Driver: kbdclass.sys, 8/4/2004 00:58:32, 24576 bytes
|
+ Logitech PS/2 Port Mouse
| Matching Device ID: *pnp0f12
| Service: i8042prt
| Driver: i8042prt.sys, 8/4/2004 01:14:36, 52736 bytes
| Driver: mouclass.sys, 8/4/2004 00:58:32, 23040 bytes
|
+ Terminal Server Mouse Driver
| Matching Device ID: root\rdp_mou
| Upper Filters: mouclass
| Service: TermDD
| Driver: termdd.sys, 8/4/2004 03:01:07, 40840 bytes
| Driver: mouclass.sys, 8/4/2004 00:58:32, 23040 bytes



Is this enough info, lol?
Logged

Offline Roscoroo(work)

  • Copper Member
  • **
  • Posts: 111
      • http://members.ispwest.com/roscoroo/
Help with voice!!
« Reply #13 on: May 25, 2006, 03:39:00 PM »
try turning down your sound excelleration one notch

also with the different firewalls in h2h it may have voice wacked

I'll host a room tonight if ya want to try to work it out (6pmish pacific)

your drivers look ok (your not getting any game lockups are you ?)

I dont see any reason why VC wont work in the MA  ive got the same sound setup and mine works fine most of the time.
Logged

Offline Holly83

  • Silver Member
  • ****
  • Posts: 1234
Help with voice!!
« Reply #14 on: May 25, 2006, 10:26:08 PM »
How do I turn my sound acceleration down?
Sorry, I didn't get your message until now. I've been painting my living room ceiling, lol. Maybe sometime tomorrow?


No I'm not getting any lockups.
Logged
Pages: [1] 2   Go Up
« previous next »