« previous next »
Pages: [1] 2   Go Down

Author Topic: CH HOTAS Users  (Read 1210 times)

Offline Hajo

  • Platinum Member
  • ******
  • Posts: 6036
CH HOTAS Users
« on: June 02, 2006, 04:00:40 AM »
If you're having trouble....Throttle doesn't work....fire buttons don't work and you're using control manager there is an easy fix.

Open control manager....my throttle is set as control device 3, the axis I'm using in control Manager is Slider.  All I did was then enter AH and went to set joystick.  Made my control manager 3 device into throttle 1 (click on advanced) in AH....selected slider and made control device 3 throttle 1.
Have Control Manager Map loaded when you go into AH joystick setup.
And just map what you are using (axis, buttons,etc.) in Control Manager to AH.

Fire buttons...same thing....in AH keymapping all I did was select the key that I have mapped in control manager into AH keymapping.  Youll find there is no fire primary, both, or secondary mapped in Aces High.  Just map you Control Manager keystroke in AH keymapping....match them and you're in!

remember...have your control manager map activated when you do the above.  Only took a short while to figure this out.
Logged
- The Flying Circus -

Offline Bruno

  • Silver Member
  • ****
  • Posts: 1252
      • http://4jg53.org
CH HOTAS Users
« Reply #1 on: June 02, 2006, 11:26:14 AM »
I have CH Hotas and run Ch manager 4 in mapped mode and several scripts. I downloaded the 2.08 beta and the gold patch and have had no issue at all with my set up with the exceptions of my RPM Axis being reversed.

In direct mode your devices will be numbered in windows in whatever order you installed them. In mapped mode you have 1 device and it seems that AH has a better time recognizing the axis' correctly.
« Last Edit: June 02, 2006, 12:16:56 PM by Bruno »
Logged

Offline Skyfoxx

  • Silver Member
  • ****
  • Posts: 930
CH HOTAS Users
« Reply #2 on: June 02, 2006, 11:40:41 AM »
Using CH manager 4 here. Lost some axis and mapping after the update. Followed Hajo's procedure and am back in business.

Thanks
Logged
"Consider your own fortunes gentlemen the deepest circle of hell is reserved for traitors and mutineers."

Offline Clifra Jones

  • Silver Member
  • ****
  • Posts: 1210
CH HOTAS Users
« Reply #3 on: June 02, 2006, 12:11:00 PM »
I'm using CM 2.xx (or somthing) and everything imported perfectly. Only had to copy mod 1 to 2 & 3. Luckily the only thing I use the modes for is re-arranging fire control. That was easy to reset, only 2 changes / mode.
Logged

Offline Birddogg

  • Copper Member
  • **
  • Posts: 199
CH HOTAS Users
« Reply #4 on: June 02, 2006, 12:23:22 PM »
Im very happy with 2.08, it finally allows me to use all CH hotas functions without having to run CH software.

:aok
Logged

Offline GRUNHERZ

  • Plutonium Member
  • *******
  • Posts: 13413
CH HOTAS Users
« Reply #5 on: June 02, 2006, 12:32:51 PM »
Full CH HOTAS user here as well nad the mapping transfered obver eaily.

I'm curious can yiu map the CH Throittle mouse stick in the AH mapper?
Logged

Offline SlapShot

  • Plutonium Member
  • *******
  • Posts: 9121
CH HOTAS Users
« Reply #6 on: June 02, 2006, 12:34:18 PM »
Quote
Originally posted by Bruno
I have CH Hotas and run Ch manager 4 in mapped mode and several scripts. I downloaded the 2.08 beta and the gold patch and have had no issue at all with my set up with the exceptions of my RPM Axis being reversed.

In direct mode your devices will be numbered in windows in whatever order you installed them. In mapped mode you have 1 device and it seems that AH has a better time recognizing the axis' correctly.


SWEET !!! I run in mapped mode too ... any detail on how you re-reversed the RPM axis would be much appreciated.
Logged
SlapShot - Blue Knights

Guppy: "The only risk we take is the fight, and since no one really dies, the reward is the fight."

Offline Chalenge

  • Plutonium Member
  • *******
  • Posts: 15179
CH HOTAS Users
« Reply #7 on: June 02, 2006, 12:49:01 PM »
Just select the advanced option and then reverse that axis.
Logged
If you like the Sick Puppy Custom Sound Pack the please consider contributing for future updates by sending a months dues to Hitech Creations for account "Chalenge." Every little bit helps.

Offline Bruno

  • Silver Member
  • ****
  • Posts: 1252
      • http://4jg53.org
CH HOTAS Users
« Reply #8 on: June 02, 2006, 02:21:42 PM »
Quote
SWEET !!! I run in mapped mode too ... any detail on how you re-reversed the RPM axis would be much appreciated.


Quote
Just select the advanced option and then reverse that axis.


What he said...
Logged

Offline SlapShot

  • Plutonium Member
  • *******
  • Posts: 9121
CH HOTAS Users
« Reply #9 on: June 02, 2006, 04:00:37 PM »
:aok  ... thanks guys.
Logged
SlapShot - Blue Knights

Guppy: "The only risk we take is the fight, and since no one really dies, the reward is the fight."

Offline KTM520guy

  • Nickel Member
  • ***
  • Posts: 593
CH HOTAS Users
« Reply #10 on: June 02, 2006, 04:01:37 PM »
I run my CH set up in mapped mode. V2.07 worked great, V2.08 not so much. I'm still trying to get back most of my functionality. Having to remap every button every time I turn the computer on gets old fast.
Logged
Everything King Midas touches turns to gold. Everything Chuck Norris touches turns up dead.

Offline MOSQ

  • Silver Member
  • ****
  • Posts: 1198
CH HOTAS Users
« Reply #11 on: June 02, 2006, 06:09:32 PM »
I use the throttle wheel on the CH JS as my RPM adjustment. Everything else worked fine, but my RPM wheel was either full on or full off. It was also reversed. Then I figured out you can calibrate that individual axis in the Aces High controller page and reverse the axis too.

Problem solved.
Logged

Offline Shaky

  • Nickel Member
  • ***
  • Posts: 550
CH HOTAS Users
« Reply #12 on: June 02, 2006, 07:05:21 PM »
Quote
Originally posted by GRUNHERZ
Full CH HOTAS user here as well nad the mapping transfered obver eaily.

I'm curious can yiu map the CH Throittle mouse stick in the AH mapper?


Yup, AH2 sees it as the X and Y axis for the ProThrottle. The Z axis is the throttle slide, of course :)

I use mine to move up, down, left and right in my views. Now if HT would only fix it so that when you use the analog control, your view doesn't go back to the default before you move about.
Logged
Political correctness is a doctrine fostered by a delusional, illogical, liberal minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end.

Offline Shaky

  • Nickel Member
  • ***
  • Posts: 550
CH HOTAS Users
« Reply #13 on: June 02, 2006, 07:06:15 PM »
Quote
Originally posted by KTM520guy
I run my CH set up in mapped mode. V2.07 worked great, V2.08 not so much. I'm still trying to get back most of my functionality. Having to remap every button every time I turn the computer on gets old fast.


Don't use the mapped mode :) I don't use any of the CH software.
Logged
Political correctness is a doctrine fostered by a delusional, illogical, liberal minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end.

Offline KTM520guy

  • Nickel Member
  • ***
  • Posts: 593
CH HOTAS Users
« Reply #14 on: June 02, 2006, 07:56:41 PM »
Quote
Originally posted by Shaky
Don't use the mapped mode :) I don't use any of the CH software.


If I don't use mapped mode AH only sees my throttle but thinks it's the stick:eek:
Logged
Everything King Midas touches turns to gold. Everything Chuck Norris touches turns up dead.
Pages: [1] 2   Go Up
« previous next »