« previous next »
Pages: [1]   Go Down

Author Topic: ch mini stk  (Read 362 times)

Offline Silat

  • Gold Member
  • *****
  • Posts: 2536
ch mini stk
« on: October 08, 2006, 12:43:16 PM »
Anyone programmed the mini stk for multi engine controL?
Someone said they had and Ive forgotten who it was.
Logged
+Silat
"The first time someone shows you who they are, believe them." — Maya Angelou
"Conservatism offers no redress for the present, and makes no preparation for the future." B. Disraeli
"All that serves labor serves the nation. All that harms labor is treason."

Offline Auger

  • Nickel Member
  • ***
  • Posts: 492
      • AKs Home Page
ch mini stk
« Reply #1 on: October 08, 2006, 02:16:02 PM »
Silat, I never even thought about that, but it would be possible.  You could use the up/down axis for throttle and the left/right axis for RPMs.  Or you could use up/down for one engine and left/right for the other.  I haven't done much programming for the CH USB suite, and would have to figure out the right way to toggle the engines without the main throttle overriding the mini stick.

Sounds like something to work on while I'm stuck in a hotel room this week.
Logged

Offline Balsy

  • Nickel Member
  • ***
  • Posts: 717
ch mini stk
« Reply #2 on: October 08, 2006, 02:53:57 PM »
Look up JNOV's post over at the CH Hanger.. hes done it with the mnistick awhile back. I havent screwd around with it yet. but basically he uses the x axis to break one throttle down to 70 % power when deflected. It doest change the input when centered.
Logged

Offline Silat

  • Gold Member
  • *****
  • Posts: 2536
ch mini stk
« Reply #3 on: October 12, 2006, 06:05:16 PM »
Quote
Originally posted by Auger
Silat, I never even thought about that, but it would be possible.  You could use the up/down axis for throttle and the left/right axis for RPMs.  Or you could use up/down for one engine and left/right for the other.  I haven't done much programming for the CH USB suite, and would have to figure out the right way to toggle the engines without the main throttle overriding the mini stick.

Sounds like something to work on while I'm stuck in a hotel room this week.


Hi

 Im not sure what I want but it sounds interesting.
 Example you could turn off or throttle down the left engine by pushing stick left (actually up is what I call left), then push stick forward for all engines again?
Logged
+Silat
"The first time someone shows you who they are, believe them." — Maya Angelou
"Conservatism offers no redress for the present, and makes no preparation for the future." B. Disraeli
"All that serves labor serves the nation. All that harms labor is treason."

Offline Auger

  • Nickel Member
  • ***
  • Posts: 492
      • AKs Home Page
ch mini stk
« Reply #4 on: October 13, 2006, 12:34:40 PM »
Quote
Originally posted by Silat
Hi

 Im not sure what I want but it sounds interesting.
 Example you could turn off or throttle down the left engine by pushing stick left (actually up is what I call left), then push stick forward for all engines again?


Would you also want the right engine to throttle down when the mini-stick is pushed right, with full engines on when the stick is pushed up?  This may be rough to get right, as it's hard to move the mini-stick purely up/down or left/right without getting the other axis in there a little.

I'm going to have to dig into the programming docs.  This sounds doable, but I'm going to have to train up my script-fu.
Logged

Offline Balsy

  • Nickel Member
  • ***
  • Posts: 717
ch mini stk
« Reply #5 on: October 14, 2006, 07:15:49 AM »
I believe that is why JNOV decided to limit the inputs to the x axis, and ignores the Y axis... I wouldnt want to hold the ministick up for full throttle. If its in neutral, there should be no changes in throttle. Left stick left engine throttles down, right stick right engine throttles down.

Just my 2 cents.
Logged

Offline Silat

  • Gold Member
  • *****
  • Posts: 2536
ch mini stk
« Reply #6 on: October 15, 2006, 02:20:47 AM »
Quote
Originally posted by Auger
Would you also want the right engine to throttle down when the mini-stick is pushed right, with full engines on when the stick is pushed up?  This may be rough to get right, as it's hard to move the mini-stick purely up/down or left/right without getting the other axis in there a little.

I'm going to have to dig into the programming docs.  This sounds doable, but I'm going to have to train up my script-fu.



Whatever is the RIGHT way , I await your directions:)
Thanks.
ScriptFU music for you http://www.videocure.com/video_loading30_52.php?jop=2&letter=l&id=f393386c856333b6332d73d6eb242bcd&bw=undefined
Logged
+Silat
"The first time someone shows you who they are, believe them." — Maya Angelou
"Conservatism offers no redress for the present, and makes no preparation for the future." B. Disraeli
"All that serves labor serves the nation. All that harms labor is treason."

Offline Silat

  • Gold Member
  • *****
  • Posts: 2536
ch mini stk
« Reply #7 on: October 15, 2006, 02:21:48 AM »
Quote
Originally posted by Balsy
I believe that is why JNOV decided to limit the inputs to the x axis, and ignores the Y axis... I wouldnt want to hold the ministick up for full throttle. If its in neutral, there should be no changes in throttle. Left stick left engine throttles down, right stick right engine throttles down.

Just my 2 cents.


Balsy you are probably correct.
Logged
+Silat
"The first time someone shows you who they are, believe them." — Maya Angelou
"Conservatism offers no redress for the present, and makes no preparation for the future." B. Disraeli
"All that serves labor serves the nation. All that harms labor is treason."
Pages: [1]   Go Up
« previous next »