Author Topic: Joystick works fine then after running AH awhile gets very spikey  (Read 1111 times)

Offline AKShrike

  • Zinc Member
  • *
  • Posts: 4
Joystick works fine then after running AH awhile gets very spikey
« Reply #15 on: May 30, 2001, 05:22:00 AM »
Wow this thread is interesting and quite confusing to me because I made many changes prior to experiencing this problem.  I have never had a problem with my CH setup until about a week ago and I'm experiencing the same problem that was discribed in the original post (F-16 FighterStick, Pro Throttle/Rudders and using the GameCard3).

I did recently install a scsi drive and my case is probably a bit hotter even with a case fan.  Guess I should work this first.

Ok moved my scsi hdd to a 5 1/4 bay with 3 small fans blowing on it and also intalled a second case which blows outward.  The problem appears to have gone away but occasionlly I'll receive uncommanded inputs when above 15k.  Strange.

The problem no longer exists now.  I have no idea if it was related to the 7.02 patch or if it was heat.  The changes came at the same time, however, I suspect heat was the cause.

Shrike

[ 06-11-2001: Message edited by: AKShrike ]