Author Topic: Engine Selection on 4 Engine Equipment (Read 198 times)

vega · « **on:** October 13, 2001, 08:39:00 AM »

It is important that some changes be made to allow a 4 engine pilot to shut down an engine and be able to operate (change power settings on the other three) the remaining engines with the throttle.

As it is now, you can't do that and it's unrealistic to say the least.

Staga · « **Reply #1 on:** October 13, 2001, 10:04:00 AM »

Shift #(no. of eng) to select individual engine and Shift E to select all.

Weave · « **Reply #2 on:** October 13, 2001, 10:19:00 AM »

I think what he is saying is for example with a four engined plane, if #1 is shot out, you can't shut down #4 to balance the plane and still maintain throttle control on #'s 2 and 3.

People have been bringing this up for quite some time.

aac · « **Reply #3 on:** October 16, 2001, 10:49:00 AM »

Yes you can if #1 gets shot out hit shift 4 then the letter E and engine #4 will shut down, shift E and the throttle then controls all engines, ( however the first time I did this engine 2 & 3 shutdown and engine #4 started back up so I hit E again and #4 shutback down and 2 & 3 started back up ) The last time I had no trouble like that though.

flakbait · « **Reply #4 on:** October 16, 2001, 09:16:00 PM »

Actually you can select all engines without starting them. I have this function mapped to Control E. So if engine 1 went out on me I'd...

Shift 4 and E to kill #4 engine
Control E to select all of the working engines

Pretty simple really.

-----------------------
Flakbait [Delta6]
Delta Six's Flight School
Put the P-61B in Aces High
"For yay did the sky darken, and split open and spew forth fire, and
through the smoke rode the Four Wurgers of the Apocalypse.
And on their canopies was tattooed the number of the Beast, and the
number was 190." Jedi, Verse Five, Capter Two, The Book of Dweeb

[ 10-16-2001: Message edited by: flakbait ]

Weave · « **Reply #5 on:** October 17, 2001, 05:42:00 AM »

falkbait, is this something you have to map? I just tried it offline. Control E does nothing to restore throttle control to those engines still running. That's the problem. You can shut down any engine you want to, it's getting control of those engines left on, without having to restart the one you shut down.

all american chicken, shift E simply restarts all working engines.

[ 10-17-2001: Message edited by: Weave ]

FDutchmn · « **Reply #6 on:** October 17, 2001, 10:29:00 AM »

hmmm... I thought you can shut down Engine 4 in case Engine 1 gets shot dead. I think I have done this...

What I have not done is keep Engine 4 running but throttling it down without shutting it down completely...

I have an analog throttle... kinda wondering if it would work... Gonna try it out...

Flying Dutchman

flakbait · « **Reply #7 on:** October 17, 2001, 11:49:00 PM »

It is something you have to map. Back in 1.06 or 1.07 HTC threw in that little added control bonus. Go into the keymapper and you'll see it, eventually. I had to do some hunting before I tracked it down.

-----------------------
Flakbait [Delta6]
Delta Six's Flight School
Put the P-61B in Aces High
"With all due respect Chaplian, I don't think my maker wants to hear from me right now. I'm gonna go out there and remove one of His creations from this universe.
And when I get back I'm gonna drink a bottle of Scotch like it was Chiggy von
Richthofen's blood and celebrate his death."
Col. McQueen, Space: Above and Beyond

hitech · « **Reply #8 on:** October 18, 2001, 11:48:00 AM »

Yep Ctrl E is the default to reselect all engs. Like any new function it needed to be maped if you had an existing instalation.

HiTech

Weave · « **Reply #9 on:** October 18, 2001, 01:07:00 PM »

Thanks guys, I check it out tonight!