Author Topic: BOMBER ? (Read 172 times)

ScreamingEgle · « **on:** November 04, 2000, 12:27:00 PM »

I have been into B17 flying and am having trouble or I should say, do not know haow to make the gunner at the selected position FIRE ALL by utilizing the TRIGGER KEY in lieu of the KEY BOARD, is this possible?
My equiptment: CH PRO / thrtl-rdrs-F16 fytr stick.
Thanks
ED se

Graywolf · « **Reply #1 on:** November 04, 2000, 12:31:00 PM »

The primary trigger will fire all mounts able to bear on the target, the secondary trigger will just fire the mount you are currently manning.

------------------
Graywolfe <tim@flibble.org>

Wingnut_0 · « **Reply #2 on:** November 04, 2000, 01:58:00 PM »

On top of what GWolf said, if your still having problems..go into settings..then check your keyboard and stick profile and make sure that in the <Gunner> selections that you have them set right.

------------------
Wingnut
GeschwaderKommadore
P.T.R. "Black 13"

The quality of the box matters little. Success depends upon the man who sits in it - Baron Manfred von Richthofen

ScreamingEgle · « **Reply #3 on:** November 04, 2000, 07:50:00 PM »

Thanks for the responce, but not quite sure how to get the trigger on my stick to activate the Fire All command.This is from the gunner positions. I checked the stick mapping and it said fire all button one, secondary button two, is it possible to make the stick trigger fire All command?
In speed keys I have the command N for fytr shooting, it works well.

ED

iculus · « **Reply #4 on:** November 12, 2000, 09:06:00 PM »

If you'd like to fly as a part of a new heavy bomber squad, drop me a line!

IC
CO 576(Bomber) Squadron-RAF
ryanridge@earthlink.net

DmdBT · « **Reply #5 on:** November 12, 2000, 11:23:00 PM »

The "n" key will fire both primary and secondary in a fighter. In a bomber it will not fire the guns! I either use the keyboard or one of the other buttons programmed on my stick.

T

CH pro throttle
CH f16 fighterstick
TM pedals

Hans · « **Reply #6 on:** November 13, 2000, 04:12:00 AM »

Its not a keyboard problem.

It sounds like your trying to map a button using a programable joystick....don't. Aces High already has a joystick button mapper.

Its a joystick button setting you don't have correct.

Go to the tower, setup, STICK MAPPING, gunner.

When your there, select the "fire all" field, and also select button 1 from the list above, and hit the "set button" button.

To prove that your trigger is button 1, just pull it....it should darken out one of the joystick buttons up in the top of the screen.

Hans.

[This message has been edited by Hans (edited 11-13-2000).]