« previous next »
Pages: [1] 2   Go Down

Author Topic: HARD DRIVE HELP  (Read 586 times)

Offline RightF00T

  • Silver Member
  • ****
  • Posts: 1943
HARD DRIVE HELP
« on: June 16, 2009, 08:39:32 PM »
I have a 250GB Hitachi HD with a boatload of raw video files, projects, music projects, MP3s, etc....I get to the Disk Management utility to initialize the disk so that it shows up so I can see the files and I keep getting the error "Logital Disk Manager- Device Not Ready".  Now, I have tried recovery programs, registry edits, and generally any dumb advice that the yokels found Google can offer with no avail.  Can someone give me a definitive answer of what this error means, because people either have some wierd way of explaining it or want you to pay 19.95 to find the answer to your problems.  I really need these files, and I figure we've got some computer whizzes around here.  Thanks
Logged

Offline Fulmar

  • Gold Member
  • *****
  • Posts: 3936
      • Aces High Movie Database
Re: HARD DRIVE HELP
« Reply #1 on: June 16, 2009, 08:46:13 PM »
This is an internal hard drive or an external hard drive that uses a USB connection?  If it's the latter, try mounting the hard drive inside your computer (if you have a desktop computer).  I've seen a few times were the cheap little circuit board on your External HD enclosure goes bad but the Hard drive is still good.
Logged
In game callsign: not currently flying
Flying off and on since Warbirds
Aces High Movies available at www.derstuhl.net/ahmd2 - no longer aceshighmovies.com - not updated either

Offline RightF00T

  • Silver Member
  • ****
  • Posts: 1943
Re: HARD DRIVE HELP
« Reply #2 on: June 16, 2009, 09:01:46 PM »
Its an internal drive...I'm using an adapter right now, but internal I get the same thing
Logged

Offline OOZ662

  • Platinum Member
  • ******
  • Posts: 7019
Re: HARD DRIVE HELP
« Reply #3 on: June 16, 2009, 11:34:47 PM »
I've only ever seen that error from disk burners and it simply means that the hardware isn't ready for instructions yet. In the case of disk drives, it's usually that you've just closed the tray and it's doing preliminary checks on the media.

A hard drive that's installed before the system is powered on shouldn't give this error as far as I know. My best guess would be that a component in the drive has failed and the drive is waiting for it.
Logged
A Rook who first flew 09/26/03 at the age of 13, has been a GL in 10+ Scenarios, and was two-time Points and First Annual 68KO Cup winner of the AH Extreme Air Racing League.

Offline bcadoo

  • Nickel Member
  • ***
  • Posts: 685
Re: HARD DRIVE HELP
« Reply #4 on: June 17, 2009, 12:22:04 AM »
What kind of file system is on the disk?  Is it encrypted?  Vista or XP or ?? 
Logged
The fight is the fun........Don't run from the fun!
"Nothin' cuts the taste of clam juice like a big hunk o' chocolate" - Rosie O'Donnell

Offline Kermit de frog

  • Gold Member
  • *****
  • Posts: 3708
      • LGM Films
Re: HARD DRIVE HELP
« Reply #5 on: June 17, 2009, 01:08:58 AM »
Why did you "initialize" the disk?

Is this a SATA or IDE hard drive?

Did you ever have linux installed on this same drive or a PC with this drive?

Did you by chance have a RAID or change the disk to a dynamic disk?

Was there a change in Operating systems such as WinXP Pro to Vista Home basic?


Logged
Time's fun when you're having flies.

Offline MrRiplEy[H]

  • Persona Non Grata
  • Plutonium Member
  • *******
  • Posts: 11633
Re: HARD DRIVE HELP
« Reply #6 on: June 17, 2009, 06:50:27 AM »
Did you try this already:

-- Right click on My Computer, choose Manage
-- Go to the Disk Management section (under Storage)
-- Your disk should be listed in the lower section; it will say Disk 0/1/2 (etc.) and say Not Initialized
-- Right click on the GREY portion of that line (where it has the Disk icon), not the white part (where I was clicking before I realized my error)
-- Choose Initalize. It takes but a moment for it to mount the drive.
-- Give the disk a drive letter

If that won't work and internal direct plugging to different ports won't work you have a dead HD. If you used an adapter, try without it and try different sata / pata ports.
Logged
Definiteness of purpose is the starting point of all achievement. –W. Clement Stone

Offline Hornet33

  • Gold Member
  • *****
  • Posts: 2487
Re: HARD DRIVE HELP
« Reply #7 on: June 17, 2009, 07:44:04 AM »
Make sure the jumper is installed on the drive in the slave position. I've seen this mess up systems before if it's in the master position or if it's removed completely. Depends on the drive.
Logged
AHII Con 2006, HiTech, "This game is all about pissing off the other guy!!"

Offline OOZ662

  • Platinum Member
  • ******
  • Posts: 7019
Re: HARD DRIVE HELP
« Reply #8 on: June 17, 2009, 01:33:38 PM »
If jumpers were the cause, Windows wouldn't see it at all. Any drives it conflicted with would poof too.
Logged
A Rook who first flew 09/26/03 at the age of 13, has been a GL in 10+ Scenarios, and was two-time Points and First Annual 68KO Cup winner of the AH Extreme Air Racing League.

Offline Shuffler

  • Radioactive Member
  • *******
  • Posts: 27351
Re: HARD DRIVE HELP
« Reply #9 on: June 17, 2009, 01:37:19 PM »
Knowing if the drive was setup in XP or vista would help.
Logged
80th FS "Headhunters"

S.A.P.P.- Secret Association Of P-38 Pilots (Lightning In A Bottle)

Offline RightF00T

  • Silver Member
  • ****
  • Posts: 1943
Re: HARD DRIVE HELP
« Reply #10 on: June 22, 2009, 11:18:26 AM »
Drive was installed in a MAC and formatted after use.  I then used the drive with an adapter to load my files from the MAC.  Brought the drive home and installed it inside the computer(Vista).  The drive could be initialized at first so I did that, but no files or the drive showed up in My Computer.  Uninstalled drive and used adapter to USB connection and drive still needs initializing?  I just think its very strange to have to initialize what the computer sees as an external drive.
Logged

Offline OOZ662

  • Platinum Member
  • ******
  • Posts: 7019
Re: HARD DRIVE HELP
« Reply #11 on: June 22, 2009, 11:36:02 AM »
In that case, I would say that the disk is probably formatted in a file system that Windows can't read. However, I know nothing of Macs, so I can't tell you. Pretty much if it isn't FAT16/FAT32/NTFS, Windows won't read it.
Logged
A Rook who first flew 09/26/03 at the age of 13, has been a GL in 10+ Scenarios, and was two-time Points and First Annual 68KO Cup winner of the AH Extreme Air Racing League.

Offline Die Hard

  • Gold Member
  • *****
  • Posts: 2205
Re: HARD DRIVE HELP
« Reply #12 on: June 22, 2009, 01:13:40 PM »
The standard file system for OS X is HFS Plus. Windows can't read that. You need to pop that HD back into the MAC, backup the files and reformat the HD in FAT32, copy the files back onto it and Windows should now be able to read it.
Logged
It is better to be violent, if there is violence in our hearts, than to put on the cloak of nonviolence to cover impotence.

-Gandhi

Offline Shuffler

  • Radioactive Member
  • *******
  • Posts: 27351
Re: HARD DRIVE HELP
« Reply #13 on: June 22, 2009, 01:35:19 PM »
Quote from: Die Hard on June 22, 2009, 01:13:40 PM
The standard file system for OS X is HFS Plus. Windows can't read that. You need to pop that HD back into the MAC, backup the files and reformat the HD in FAT32, copy the files back onto it and Windows should now be able to read it.

FAT32 or NTFS
Logged
80th FS "Headhunters"

S.A.P.P.- Secret Association Of P-38 Pilots (Lightning In A Bottle)

Offline MrRiplEy[H]

  • Persona Non Grata
  • Plutonium Member
  • *******
  • Posts: 11633
Re: HARD DRIVE HELP
« Reply #14 on: June 22, 2009, 01:41:45 PM »
Yep make sure you formatted the drive with ntfs. Fat32 is not a good solution with its 2 gig file size limitation.

If you have osx leopard the disk utility tool has a clear selection for NTFS in the 'erase / format' section.
Logged
Definiteness of purpose is the starting point of all achievement. –W. Clement Stone
Pages: [1] 2   Go Up
« previous next »