Author Topic: Skuzzy help please  (Read 741 times)

Offline SNIPER30

  • Copper Member
  • **
  • Posts: 106
Skuzzy help please
« on: June 25, 2009, 10:30:02 PM »
 i tryed the new beta version which looks great :x, but my frame rate went down to 7fps to a max of 18fps with everything disabled in graphic detail :cry.

now in the ahII version we have now i get 55fps to 70fps with all the bells and whistles, if someone could help or recomend a fix i would appriciate it :aok
 

       

   HP Pavilion a6650f Desktop PC -  Product Specifications
       
 
 
 



 Hardware
 Software


Product number
FK791AA
Introduction date
07-Aug-2008
Country/region sold in:
United States
Canada
Hardware
Base processor
Phenom-9550 (A) 2.2 GHz (95W)
2000 MHz HyperTransport 1.0
Socket AM2+
Chipset
GeForce 6150SE nForce 430
Motherboard
Manufacturer: Asus
Motherboard Name: M2N68-LA
HP/Compaq motherboard name: Narra3-GL8E
Power supply
300W
Memory
Component Attributes
Memory Installed 6 GB
Maximum allowed 8 GB (4 x 2 GB) (64-bit OS)

4 GB* (4 x 1 GB) (32-bit OS)

*Actual available memory may be less
Speed supported PC2-6400 MB/sec
Type 240 pin, DDR2 SDRAM

Hard drive
500 GB SATA 3G (3.0 Gb/sec)
7200 rpm
16X DVD(+/-)R/RW 12X RAM (+/-)R DL LightScribe SATA drive
Must use Double-Layer media discs in order to take advantage of the DL technology
Must use LightScribe-enabled media discs and supporting software in order to take advantage of the LightScribe technology
Function Maximum speed
DVD-RAM Up to 12X
DVD-R DL Write Once Up to 8X
DVD+R DL Write Once Up to 8X
DVD+R Write Once Up to 16X
DVD+RW Rewritable Up to 8X
DVD-R Write Once Up to 16X
DVD-RW Rewritable Up to 6X
DVD ROM Read Up to 16X
CD-R Write Once Up to 40X
CD-RW Rewritable Up to 32X
CD-ROM Read Up to 40X

Video Graphics
Integrated graphics
Sound/Audio
High Definition 8-channel audio
ALC 888S chipset
Network (LAN)
Integrated 10/100 Base-T networking interface
Memory card reader
Supports the following cards:
Compact Flash I
Compact Flash II
IBM Microdrive
Secure Digital (SD)
mini-SD
MultiMediaCard (MMC)
Reduced size MultiMediaCard (RS-MMC)
MultiMediaCard Plus (MMC plus)
MultiMediaCard Mobile (MMC mobile)
Memory Stick
Memory Stick Pro
Memory Stick Duo
Memory Stick Pro Duo
SmartMedia
xD Picture Card (xD = extreme digital)
External I/O ports
I/O ports on the front panel
Port type Quantity
15-in-1 (4 slot) One
1394 One
USB Two
Headphone One
Microphone One

I/O ports on the back panel
Port type Quantity
PS/2 (keyboard, mouse) Two
VGA One
USB Four
1394a One
LAN One
SPDIF out (coaxial) One
Audio (side speaker out, rear speaker out, center speaker out, line-in, line-out, microphone) One Each

Expansion slots
Slot type Quantity
PCI One (One available)
PCI Express x16 One (One available)
PCI Express x1 Two (Two available)

Drive bays
Bay type Quantity
5.25" Two (One available)
3.5" Three (Two available)

Keyboard and mouse
HP multimedia keyboard
Quebec Keyboard Kit (French Canada only)
HP PS/2 optical mouse
Software
 NOTE:  HP provides basic support for software that comes with the computer. For in-depth feature assistance, refer to the help section in the software or on the software vendor's Web site. 

Software titles that shipped with PC  Software Category Software Title
Operating System Windows Vista Home Premium with Windows Media Center (64-bit) with Vista Service Pack 1
 
CD/CD-RW/DVD/DVD+RW Windows Movie Maker & Windows DVD Maker
CyberLink DVD Suite 5
LightScribe Template Labeler
 
Entertainment, Music & Games My HP Games
 
Imaging, Photography, Video & Film HP Photosmart Essential 3
Muvee autoProducer Basic
 
Productivity  Adobe Reader
Microsoft Works 9
Microsoft Office Home and Student Edition 2007 Trial
 
Security Norton Internet Security 2008 (60-day security update subscription)
 
Support HP Total Care Advisor
HP Hardware Diagnostic Tools
Help & Support Center
Online documentation
 
Recovery HP Recovery Manager
 
Internet Solutions Microsoft Internet Explorer
Yahoo toolbar
ISP offers
 
HP Partner offers (may vary) Snapfish PictureMover (US only)
 



 
 
 
 
« Last Edit: June 25, 2009, 10:32:05 PM by SNIPER30 »
THUNDER MOB
R.I.P. 11Bravo

Offline Marshal

  • Nickel Member
  • ***
  • Posts: 373
Re: Skuzzy help please
« Reply #1 on: June 25, 2009, 11:43:27 PM »
« Last Edit: June 25, 2009, 11:44:58 PM by Marshal »

Offline 68Wooley

  • Silver Member
  • ****
  • Posts: 931
Re: Skuzzy help please
« Reply #2 on: June 26, 2009, 10:57:54 AM »
Chipset
GeForce 6150SE nForce 430

Video Graphics
Integrated graphics

That's your problem there. Integrated graphics wont cut it on modern games. AH2 pre-beta was really not very intensive from a graphics standpoint. The new version is more on a par with other modern games.

The good news is your computer has a PCI Express x16 Expansion Slot which will allow you to add a stand-alone video card. Your specs otherwise look fine.

Offline SNIPER30

  • Copper Member
  • **
  • Posts: 106
Re: Skuzzy help please
« Reply #3 on: June 26, 2009, 09:17:06 PM »
Thank you Marshal and 68Wooley for the point in the right direction and the good advise.If i my ask something else what would be a good vid card for my current system i really don't know a lot about them?Thanks again :salute
THUNDER MOB
R.I.P. 11Bravo

Offline PFactorDave

  • Platinum Member
  • ******
  • Posts: 4334
Re: Skuzzy help please
« Reply #4 on: June 26, 2009, 10:20:53 PM »
My computer has the same graphic set up as yours Sniper...  A few months ago I bought a GeForce 9500GT pretty cheap.  Looks pretty promising that I'll be able to run the new AH, not maxxed out mind you, but smooth and prettier then what we have now.

That said, I replaced my Power Source when I put the new card in also...  So, if you upgrade your video, might want to make sure your machines power is sufficient for whatever card you choose. 

1st Lieutenant
FSO Liaison Officer
Rolling Thunder

Offline SNIPER30

  • Copper Member
  • **
  • Posts: 106
Re: Skuzzy help please
« Reply #5 on: June 27, 2009, 07:03:02 AM »
Thanks dave for the input :aok i'm going to start looking for a new vid card and a power supply, but if anybody knows what a good card is so i can run the new ah on max setting i would appreciate it. :salute
THUNDER MOB
R.I.P. 11Bravo

Offline texastc316

  • Silver Member
  • ****
  • Posts: 1774
      • Mighty 316th
Re: Skuzzy help please
« Reply #6 on: June 27, 2009, 10:52:01 AM »
GeForce 9800gt will run the Beta maxxed out at 60fps. Not too expensive.
TexsTC-CO/Court Jester-Mighty 316th FS "CREEPING DEATH"  in MA/FSO

The eager pilots are not experienced. And the experienced not eager.

S.A.P.P.- Secret Association Of P-38 Pilots (Lightning In A Bottle)

Offline CRYPTIC

  • Nickel Member
  • ***
  • Posts: 442
      • 365th-FBG  HELL HAWKS
Re: Skuzzy help please
« Reply #7 on: June 27, 2009, 09:48:25 PM »
May need a new PS with that card. Check the specs on the 12 volt rail. If your not sure just ask someone will help you out. Just don't go buy Vid card without knowing what PS you need to run that card.
 If your not sure how to change it out Google your friend along with all the help that you can get here. Its not hard to do but may look confusing if it's your first time.
 Ask before you do anything and all should go well.
365th-FBG Hell Hawks XO
365th-FBG Hell Hawks

Offline TilDeath

  • Silver Member
  • ****
  • Posts: 1199
      • TD Computer Systems
Re: Skuzzy help please
« Reply #8 on: June 30, 2009, 11:29:58 AM »
If its an Hp it is most likely using a 350 to 450watt PSU.  You will have to watch what GPU you upgrade to without also upgrading the PSU, which will also be a dilemma since HP/Compaq, Dell, Gateway use a ton of stuff made specifically for them alone.  Most aftermarket items will not plug in, screw in, or adapt correctly.

TD

Offline Denholm

  • Plutonium Member
  • *******
  • Posts: 9667
      • No. 603 Squadron
Re: Skuzzy help please
« Reply #9 on: July 01, 2009, 08:45:19 AM »
He's got a 300-Watt PSU. Agreed with TilDeath. I installed a new PC Power & Cooling 750W PSU into our family's HP Pavilion a1012x, boy was it a nightmare. I had to put it in upside-down before it would fit. And afterward the CD/DVD burner wouldn't fit since it was bumping the rear of the PSU. Not to mention the freak-show of cables that don't fit anywhere (no space for cable-management).
Get your Daily Dose of Flame!
FlameThink.com
No. 603 Squadron... Visit us on the web, if you dare.

Drug addicts are always disappointed after eating Pot Pies.