Author Topic: A/C modeling (Read 909 times)

FYB · « **on:** August 10, 2009, 02:36:49 PM »

When i am in the Hangar everything is perfect, it has me an inch close to re-subscribing to AH for a month. But when i start to take off the A/C i am flying becomes white. It is in the stages of when it was done modeling but the skin is gone and all my instruments are non-visible. I can't aim either, the sights are all completely white.

I'm not sure, but when i fire there is a long in length white/transparent plus sign where the muzzle flash should be.

Any suggestions would be nice!

Skuzzy · « **Reply #1 on:** August 10, 2009, 02:49:55 PM »

A DXDIAG output would be helpful. Sounds like the video card has the "Detailed Terrain" option set with large textures when the card/chip cannot actually handle it. Just a guess.

FYB · « **Reply #2 on:** August 10, 2009, 02:58:17 PM »

I put it at 800 x 600 Res, and the texture down to 512. All the options for detailed terrain (advanced options & reg options for graphic detail) are off.

Still is happening.

Skuzzy · « **Reply #3 on:** August 10, 2009, 03:02:38 PM »

Then a DXDIAG output is really needed.

FYB · « **Reply #4 on:** August 10, 2009, 03:12:12 PM »

Quote from: Skuzzy on August 10, 2009, 03:02:38 PM

Then a DXDIAG output is really needed.

I'm unfortunately stupid at computers. So if it's a download of some sort that is needed please post a link. If it is some sort of device, I'm going to need a moment to cry little bit.

Info:

I'm running a NVIDIA GeFORCE FX 5200
On a HP Pavilion 7955

Just thought I'd throw it out there...

Skuzzy · « **Reply #5 on:** August 10, 2009, 03:23:23 PM »

Look in this thread as it contains instructions on creating the text output from DXDIAG. Just post the upper third of the text file DXDIAG creates.

Specifically, I need the system, video, and sound card parts.

FYB · « **Reply #6 on:** August 10, 2009, 03:26:44 PM »

Quote from: Skuzzy on August 10, 2009, 03:23:23 PM

Look in this thread as it contains instructions on creating the text output from DXDIAG. Just post the upper third of the text file DXDIAG creates.

Specifically, I need the system, video, and sound card parts.

Thanks Skuzzy

Gimme a min and you'll get an E-mail from monstermonstruo@yahoo.com with everything.

Skuzzy

FYB · « **Reply #7 on:** August 11, 2009, 04:04:05 PM »

Oh crap, POST it... I need to start focusing more. Excuse the mass stupidity bomb i dropped Skuzzy.

The upper third?

I tried posting and it said i past the 10k characters so let me try and put specifics.
------------------
System Information
------------------
Time of this report: 8/10/2009, 13:25:14
   Machine name: COSIMO-9AE12298
   Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.090206-1234)
   Language: English (Regional Setting: English)
System Manufacturer: HP Pavilion 04
   System Model: P5269A-ABA 7955
   BIOS: Award Medallion BIOS v6.0
Processor: Intel(R) Pentium(R) 4 CPU 1500MHz
   Memory: 768MB RAM
Page File: 460MB used, 1415MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
   DxDiag Version: 5.03.2600.5512 32bit Unicode
--------------------------------------------------
Display Devices
---------------
Card name: NVIDIA GeForce FX 5200 (Microsoft Corporation)
   Manufacturer: NVIDIA
Chip type: GeForce FX 5200
   DAC type: Integrated RAMDAC
   Device Key: Enum\PCI\VEN_10DE&DEV_0322&SUBSYS_00000000&REV_A1
   Display Memory: 128.0 MB
   Current Mode: 1280 x 960 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: nv4_disp.dll
   Driver Version: 6.14.0010.5673 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 4/13/2008 17:12:02, 4274816 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
   Mini VDD: nv4_mini.sys
Mini VDD Date: 8/3/2004 15:29:56, 1897408 bytes
Device Identifier: {D7B71E3E-4062-11CF-9975-0A2000C2CB35}
Vendor ID: 0x10DE
Device ID: 0x0322
SubSys ID: 0x00000000
Revision ID: 0x00A1
Revision ID: 0x00A1
Video Accel: ModeMPEG2_A ModeMPEG2_B ModeMPEG2_C ModeMPEG2_D ModeWMV9_B ModeWMV9_A
Deinterlace Caps: {212DC723-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_MedianFilteri ng
   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalSt retch
   {212DC723-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_MedianFilteri ng
   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalSt retch
   {212DC723-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_MedianFilteri ng
   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalSt retch
   {212DC723-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_MedianFilteri ng
   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalSt retch
   Registry: OK
   DDraw Status: Enabled
   D3D Status: Enabled
   AGP Status: Enabled
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
------------------------------------------------------------
Sound Devices
-------------
Description: Intel(r) Integrated Audio
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_8086&DEV_2445&SUBSYS_806A1043&REV_12
Manufacturer ID: 1
   Product ID: 100
   Type: WDM
Driver Name: ac97intc.sys
   Driver Version: 5.10.0000.3523 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 8/17/2001 05:20:04, 96256 bytes
Other Files:
Driver Provider: Microsoft
   HW Accel Level: Full
Cap Flags: 0xB5B
Min/Max Sample Rate: 8000, 48000
Static/Strm HW Mix Bufs: 1, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
   Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
   I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
   Registry: OK
Sound Test Result: Not run
---------------------
Sound Capture Devices
---------------------
Description: Intel(r) Integrated Audio
Default Sound Capture: Yes
Default Voice Capture: Yes
Driver Name: ac97intc.sys
   Driver Version: 5.10.0000.3523 (English)
Driver Attributes: Final Retail
Date and Size: 8/17/2001 05:20:04, 96256 bytes
Cap Flags: 0x41
   Format Flags: 0xCCC

If i need to post anything just say it and i will automatically start copying what is needed.

Skuzzy · « **Reply #8 on:** August 11, 2009, 04:40:56 PM »

I answered your email.

FYB · « **Reply #9 on:** August 11, 2009, 04:48:59 PM »

Quote from: Skuzzy on August 11, 2009, 04:40:56 PM

I answered your email.

Oh boy... By all means, no I'm not high or drunk.

Skuzzy · « **Reply #10 on:** August 11, 2009, 04:53:36 PM »

The basic upshot of it is, the FX5200 cannot run with "Detailed Terriain" option enabled. With the limited amount of system RAM, you need to set the "Maximum Texture Size" to 256, or less.

Then seeing it is an HP, I just have to figure there are around 57 to 62 processes running in the background, as there is also 460MB of page file usage. That needs to be gotten under control.

FYB · « **Reply #11 on:** August 11, 2009, 05:03:32 PM »

Everything is fine expect for the throttle. For some reason it will only go to full. I can put my throttle up to 25% and it wouldn't go. I need to put it up to 95% and the engine will automatically change to full. I can't go slowly down the runway or save fuel on long flights...

By the way what is page file? And how do i reduce it?

Skuzzy · « **Reply #12 on:** August 11, 2009, 05:13:32 PM »

Try using the "Calibrate Axis" button in Options->Controls->Map Controllers to calibrate the throttle axis.

The Windows page file is where Windows stores data which is not needed to be loaded into memory at that time. Typically, in a farily clean Windows XP system it hangs around 100 to 120MB. Yours is over 400MB. That means there is a lot of things loaded into RAM which does not need to be loaded.

Check the Windows Task Manager (Ctrl-Alt-Del), under the "Processes" tab. Lower left corner is the total count.

FYB · « **Reply #13 on:** August 11, 2009, 05:17:54 PM »

28 processes (WOW

)

Do i delete all of them?

Shuffler · « **Reply #14 on:** August 11, 2009, 05:31:50 PM »

nooooooooooooooo

Hmm 28 processes is low.

Aces High Bulletin Board

Author Topic: A/C modeling (Read 909 times)

FYB

A/C modeling

Skuzzy

Re: A/C modeling

FYB

Re: A/C modeling

Skuzzy

Re: A/C modeling

FYB

Re: A/C modeling

Skuzzy

Re: A/C modeling

FYB

Re: A/C modeling

FYB

Re: A/C modeling

Skuzzy

Re: A/C modeling

FYB

Re: A/C modeling

Skuzzy

Re: A/C modeling

FYB

Re: A/C modeling

Skuzzy

Re: A/C modeling

FYB

Re: A/C modeling

Shuffler

Re: A/C modeling