« previous next »
Pages: [1]   Go Down

Author Topic: Create Shadow Failed with -3  (Read 527 times)

Offline nimble

  • Copper Member
  • **
  • Posts: 333
Create Shadow Failed with -3
« on: October 10, 2009, 01:55:43 AM »
Not getting shadows anymore since the update that I have noticed. Everytime I takeoff I get the error in the title.

------------------
System Information
------------------
Time of this report: 10/10/2009, 02:47:11
       Machine name: MADHATTER
   Operating System: Windows Vista™ Home Premium (6.0, Build 6001) Service Pack 1 (6001.vistasp1_gdr.090302-1506)
           Language: English (Regional Setting: English)
System Manufacturer: alienware
       System Model: Aurora R5
               BIOS: BIOS Date: 03/24/09 Ver: 08.00.14
          Processor: AMD Phenom(tm) 9950 Quad-Core Processor (4 CPUs), ~2.6GHz
             Memory: 3070MB RAM
          Page File: 3625MB used, 2753MB available
        Windows Dir: C:\Windows
    DirectX Version: DirectX 10
DX Setup Parameters: Not found
     DxDiag Version: 6.00.6001.18000 32bit Unicode

------------
DxDiag Notes
------------
      Display Tab 1: No problems found.
        Sound Tab 1: No problems found.
        Sound Tab 2: No problems found.
        Sound Tab 3: No problems found.
        Sound Tab 4: No problems found.
        Sound Tab 5: No problems found.
          Input Tab: No problems found.

--------------------
DirectX Debug Levels
--------------------
Direct3D:    0/4 (retail)
DirectDraw:  0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay:  0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow:  0/6 (retail)

---------------
Display Devices
---------------
        Card name: ATI Radeon HD 4850
     Manufacturer: ATI Technologies Inc.
        Chip type: ATI Radeon Graphics Processor (0x9442)
         DAC type: Internal DAC(400MHz)
       Device Key: Enum\PCI\VEN_1002&DEV_9442&SUBSYS_05021002&REV_00
   Display Memory: 1786 MB
 Dedicated Memory: 506 MB
    Shared Memory: 1279 MB
     Current Mode: 1440 x 900 (32 bit) (60Hz)
          Monitor: Generic PnP Monitor
      Driver Name: atidxx32.dll,atidxx64,atiumdag.dll,atiumdva.dat,atiumd64,atiumd6a,atitmm64
   Driver Version: 7.15.0010.0127 (English)
      DDI Version: 10.1
Driver Attributes: Final Retail
 Driver Date/Size: 6/10/2008 22:02:42, 1626624 bytes
      WHQL Logo'd: Yes
  WHQL Date Stamp:
Device Identifier: {D7B71EE2-D702-11CF-E771-0825A1C2CA35}
        Vendor ID: 0x1002
        Device ID: 0x9442
        SubSys ID: 0x05021002
      Revision ID: 0x0000
      Revision ID: 0x0000
      Video Accel: ModeMPEG2_A ModeMPEG2_C
 Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalSt retch
                   {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
                   {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalSt retch
                   {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
                   {3C5323C1-6FB7-44F5-9081-056BF2EE449D}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                   {552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                   {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalSt retch
                   {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
     DDraw Status: Enabled
       D3D Status: Enabled
       AGP Status: Enabled

Logged
Even if it seems certain that you will lose, retaliate. Neither wisdom nor technique has a place in this. A real man does not think of victory or defeat. He plunges recklessly towards an irrational death. By doing this, you will awaken from your dreams.

Offline nimble

  • Copper Member
  • **
  • Posts: 333
Re: Create Shadow Failed with -3
« Reply #1 on: October 11, 2009, 02:44:39 PM »
Anyone? A tight rolling scissor low can suck without shadows :(
Logged
Even if it seems certain that you will lose, retaliate. Neither wisdom nor technique has a place in this. A real man does not think of victory or defeat. He plunges recklessly towards an irrational death. By doing this, you will awaken from your dreams.

Offline Knite

  • Silver Member
  • ****
  • Posts: 805
Re: Create Shadow Failed with -3
« Reply #2 on: October 12, 2009, 09:34:00 AM »
Hey Nimble,

What shadow map resolution do you have your shadows set to?

I noticed on my video card, if I set my shadow map resolution to 8192, I get that same error message every time. If I set to 4096 I get that error after a few sorties or a lot of flying (and very low framerates). If I set to 2048 I get lowish framerates but never the error, and at 1024 get good framerates and no error. I've suspected this particular error message comes when your video card runs out of memory for shadows.

I have 320MB of memory on my video card. Yours appears to be a 4850 512MB card (nice BTW), but depending on your AA and Antistropic filtering, you may be running out of video memory (yes, even with 512MB), and hitting limit. Try turning your smooth shadows down 1 notch and see how it works.
Logged
Knite

39th FS "Cobra In The Clouds"

I'm basically here to lower the 39th's score :P

Offline Skuzzy

  • Support Member
  • Administrator
  • *****
  • Posts: 31462
      • HiTech Creations Home Page
Re: Create Shadow Failed with -3
« Reply #3 on: October 12, 2009, 01:56:47 PM »
Yep, what Knite said.
Logged
Roy "Skuzzy" Neese
support@hitechcreations.com

Offline nimble

  • Copper Member
  • **
  • Posts: 333
Re: Create Shadow Failed with -3
« Reply #4 on: October 13, 2009, 03:33:39 PM »
Dunno if I am running out of vid men or not. I set the shadow to the max setting. As for the graphics card, I have 2 of those 4850s 512mb in sli(crossfire for ati?) working together. Does AH2 take advantage of multiple gpus?

I'll try tinkering with the shadow settings to see if that fixes it!
« Last Edit: October 13, 2009, 03:36:11 PM by nimble »
Logged
Even if it seems certain that you will lose, retaliate. Neither wisdom nor technique has a place in this. A real man does not think of victory or defeat. He plunges recklessly towards an irrational death. By doing this, you will awaken from your dreams.

Offline Knite

  • Silver Member
  • ****
  • Posts: 805
Re: Create Shadow Failed with -3
« Reply #5 on: October 13, 2009, 07:42:05 PM »
Hey Nimble,

Even if AH takes advantage of 2 video cards in SLI (aka Crossfire if ATI cards), the amount of MEMORY used is still only what is on a card individually. Running 2 512MB video cards in SLI or Crossfire does NOT act as if you had a 1GB card. It acts more like 1 very fast 512MB card (if the game in question doesn't have any conflicts).

Therefore, your video cards are probably beating the crap out of AH from a calculation standpoint, but still running out of memory. Set that Shadow setting to 4096 or 2048 and the error should go away. OR, if you want to make sure to keep that high shadow setting, try running with NO Anti-Aliasing, as AA also takes from that same memory pool (so does Antistropic Filtering, as well as higher resolutions).
« Last Edit: October 13, 2009, 07:44:07 PM by Knite »
Logged
Knite

39th FS "Cobra In The Clouds"

I'm basically here to lower the 39th's score :P

Offline nimble

  • Copper Member
  • **
  • Posts: 333
Re: Create Shadow Failed with -3
« Reply #6 on: October 13, 2009, 07:50:26 PM »
Ah gotcha, thanks for the info, I'll lower it tonight! Much appreciated!
Logged
Even if it seems certain that you will lose, retaliate. Neither wisdom nor technique has a place in this. A real man does not think of victory or defeat. He plunges recklessly towards an irrational death. By doing this, you will awaken from your dreams.
Pages: [1]   Go Up
« previous next »