Author Topic: 733 to 800 Celeron (Read 534 times)

Swager · « **on:** April 05, 2001, 06:51:00 AM »

Any one have a 733 or 800 celeron? If so, what kind of performance are you seeing dealing with AH?

Can you overclock these high celerons?

Thanks

------------------
Swager
On Leave 3./JG2~Richthofen~[/i]

"Enjoy yourselves now... for I'll be back"
3./JG2

Fishu · « **Reply #1 on:** April 05, 2001, 07:06:00 AM »

Umm.. is 566@850 acceptable?

Yes those are overclockable.
at least ive heard of them running bit over 1100mhz.

Staga · « **Reply #2 on:** April 05, 2001, 07:45:00 AM »

"Coppermine" PIII 700 (Model SL45Y) goes easily 933Mhz = 100Mhz bus ->133Mhz.

Just FYI

Staga · « **Reply #3 on:** April 05, 2001, 07:51:00 AM »

http://www.overclockercafe.com/most_affordable_bang_for_your_buck_.htm

I have SL45Y and it works like a dream @933

[This message has been edited by Staga (edited 04-05-2001).]

jihad · « **Reply #4 on:** April 05, 2001, 08:30:00 AM »

Check the CPU database at:

http://www.overclockers.com/home.asp

For a guaranteed overclockable Celeron order from:

http://www.step-thermodynamics.com/

Camel · « **Reply #5 on:** April 05, 2001, 07:02:00 PM »

c733 here,

Ive been running it at 958 since the day I got it w/ no extra voltage or fancy coolers.

Temp under load has never gone above 41C.

Its no P3, but for a hundred bucks It will hold me over till I get a P3.

I also built 2 more c733 machines last month, and both ran at 902 out of the box. I didnt push it, cause they werent my machines.

Staga and I have about the same speed, and vid card(Gforce2mx), but he has a P3, and does at LEAST 1000 points better with 3Dmark 2000.

I have no problems with AH. Flying/driving through smoke is not a problem.

camel