Author Topic: Odds n' ends  (Read 1118 times)

Offline 1701E

  • Silver Member
  • ****
  • Posts: 1889
      • VBF-18 Bearcats
Odds n' ends
« on: June 30, 2011, 04:59:01 PM »
Got some random computer parts I'm looking to get rid of:


4x IDE Cables
>Free

1x SATA Cable
 >Free

3x PSU Wall Power Cables (Rating: 10A  125V 1250W)
 >Free

1x 80mm Sleeve Bearing Case Fan (Mod: C825S12M) (3-pin)
 >>Included 80mm to 120mm (or 120mm to 80mm) plastic adapter upon request
 > Free

1x Thermaltake TT-8015A Hard Drive Fan Cooler (Molex)
 >$5.00

1x AMD Stock AM2/AM2+ (any socket using the Lever design) socket Heatsink/Fan
 >$5.00

1x Fan/HDD indicator, Temperature Reader.  Came with Aerocool M40 case, 1 wire unattached, not to any standard form factor size (3.5" / 5.25").
 >Free   Due to unknown working state


Any questions just contact.

<S>
 X
ID: Xcelsior
R.I.P. Fallen Friends & Family

"The only ones who should kill are those prepared to be killed"

Offline 1701E

  • Silver Member
  • ****
  • Posts: 1889
      • VBF-18 Bearcats
Re: Odds n' ends
« Reply #1 on: July 04, 2011, 03:45:55 PM »
Updated list:

5x IDE Cables
>Free

1x SATA Cable -Sold

3x PSU Wall Power Cables (Rating: 10A  125V 1250W)
 >Free

1x 80mm Sleeve Bearing Case Fan (Mod: C825S12M) (3-pin) -Sold


1x Thermaltake TT-8015A Hard Drive Fan Cooler (Molex) -Sold


1x AMD Stock AM2/AM2+ (any socket using the Lever design) socket Heatsink/Fan -Sold


1x Fan/HDD indicator, Temperature Reader.  Came with Aerocool M40 case, 1 wire unattached, not to any standard form factor size (3.5" / 5.25") -Sold

1x Card Reader/USB port, not to standard Dimensions (3.5" / 5.25"), came with E-machines computer. Connects via USB Header on Motherboard.
>$5.00

<S>
 X
ID: Xcelsior
R.I.P. Fallen Friends & Family

"The only ones who should kill are those prepared to be killed"

Offline 1701E

  • Silver Member
  • ****
  • Posts: 1889
      • VBF-18 Bearcats
Re: Odds n' ends
« Reply #2 on: August 02, 2011, 05:35:15 PM »
Updated List:

6x IDE Cables
>Free

3x PSU Wall Power Cables (Rating: 10A  125V 1250W)
 >Free

2x Mouse USB to PS/2 adapters  &  1x Keyboard USB to PS/2 Adapter
> Free

1x VGA Female to DVI Male Adapter
> Free

1x VGA Male to VGA Male Cable
> Free

1x 120mm Thermaltake fan, Red fan / Black Casing
> Free

1x Card Reader/USB port, not to standard Dimensions (3.5" / 5.25"), came with E-machines computer. Connects via USB Header on Motherboard.
>$5.00

1x Mag Innovations 17" VGA LCD Monitor; Silver Bezel; Moderate shape.  Has a loose cable causing the screen to go green at times, cable is only replaceable via the inside of the monitor. Power Cable included.
> S/H + $10

<S>
 X
ID: Xcelsior
R.I.P. Fallen Friends & Family

"The only ones who should kill are those prepared to be killed"

Offline 1701E

  • Silver Member
  • ****
  • Posts: 1889
      • VBF-18 Bearcats
Re: Odds n' ends
« Reply #3 on: August 11, 2011, 11:39:17 AM »
Updated List:

6x IDE Cables
>Free

3x PSU Wall Power Cables (Rating: 10A  125V 1250W)
 >Free

2x Mouse USB to PS/2 adapters  &  1x Keyboard USB to PS/2 Adapter
> Free

1x VGA Female to DVI Male Adapter
> Free

1x VGA Male to VGA Male Cable
> Free

1x 120mm Thermaltake fan, Red fan / Black Casing - Sold

1x Card Reader/USB port, not to standard Dimensions (3.5" / 5.25"), came with E-machines computer. Connects via USB Header on Motherboard.
>$5.00

1x Mag Innovations 17" VGA LCD Monitor; Silver Bezel; Moderate shape.  Has a loose cable causing the screen to go green at times, cable is only replaceable via the inside of the monitor. Power Cable included.
> S/H + $10

<S>
 X
ID: Xcelsior
R.I.P. Fallen Friends & Family

"The only ones who should kill are those prepared to be killed"

Offline 1701E

  • Silver Member
  • ****
  • Posts: 1889
      • VBF-18 Bearcats
Re: Odds n' ends
« Reply #4 on: August 30, 2011, 02:33:26 PM »
Updated List:

6x IDE Cables
>Free

1x PSU Wall Power Cables (Rating: 10A  125V 1250W) - 2 Sold
 >Free

2x Mouse USB to PS/2 adapters  &  1x Keyboard USB to PS/2 Adapter
> Free

1x VGA Female to DVI Male Adapter
> Free

1x VGA Male to VGA Male Cable
> Free

1x 120mm Thermaltake fan, Red fan / Black Casing - Sold

1x Card Reader/USB port, not to standard Dimensions (3.5" / 5.25"), came with E-machines computer. Connects via USB Header on Motherboard. - Potentially Sold
>Free

1x Mag Innovations 17" VGA LCD Monitor; Silver Bezel; Moderate shape.  Has a loose cable causing the screen to go green at times, cable is only replaceable via the inside of the monitor. Power Cable included.
> S/H + $10

<S>
  X
ID: Xcelsior
R.I.P. Fallen Friends & Family

"The only ones who should kill are those prepared to be killed"

Offline 1701E

  • Silver Member
  • ****
  • Posts: 1889
      • VBF-18 Bearcats
Re: Odds n' ends
« Reply #5 on: December 07, 2011, 10:49:28 PM »
Still have most of the bits laying around for anyone who wants/needs them, everything is free of charge.

6x IDE Cables

2x Mouse USB to PS/2 Converters & 1x Keyboard USB to PS/2 Converter

1x VGA Male-to-Male Cable

1x DVI Female to HDMI Male converter

1x VGA Female to DVI Male converter

1x Used and Abused Logitech 3D Pro; Rudder is shot, plastic is broken in areas (nowhere that would cause pain to the user), Hat Switch is down to about 3 working views, all buttons work, Aileron/Elevator Axis work, Throttle works, The wire is not stock and is protruding out of the Stick Base as it would not fit in the original wire-hole. Stick still works for flying, but is likely best of used for parts.

1x Biostar 785GE Motherboard AM2+ Motherboard. Potentially Fried I had an incident a while back (which prompted a Motherboard/CPU upgrade) where a PCI Metal Cover fell on the Motherboard causing it to zap. It worked fine afterwards but was giving me some weird CPU errors that could have been purely the CPU (Never figured it out, got new parts instead). So if someone wants it and understands the risks of a potentially fried Motherboard here it is.
>>If it works I would ask to please cover the shipping rounded to the nearest $5 (for convenience) as it weighs enough to have a shipping weight.


If anyone wants additional Information or Pictures please PM me and I will be glad to help however I can.

<S>
  X
ID: Xcelsior
R.I.P. Fallen Friends & Family

"The only ones who should kill are those prepared to be killed"

Offline 1701E

  • Silver Member
  • ****
  • Posts: 1889
      • VBF-18 Bearcats
Re: Odds n' ends
« Reply #6 on: December 12, 2011, 05:50:00 PM »
Updated list:

6x IDE Cables

2x Mouse USB to PS/2 Converters

1x VGA Male-to-Male Cable

1x VGA Female to DVI Male converter

1x Used and Abused Logitech 3D Pro; Rudder is shot, plastic is broken in areas (nowhere that would cause pain to the user), Hat Switch is down to about 3 working views, all buttons work, Aileron/Elevator Axis work, Throttle works, The wire is not stock and is protruding out of the Stick Base as it would not fit in the original wire-hole. Stick still works for flying, but is likely best of used for parts.

1x Biostar 785GE Motherboard AM2+ Motherboard. Potentially Fried I had an incident a while back (which prompted a Motherboard/CPU upgrade) where a PCI Metal Cover fell on the Motherboard causing it to zap. It worked fine afterwards but was giving me some weird CPU errors that could have been purely the CPU (Never figured it out, got new parts instead). So if someone wants it and understands the risks of a potentially fried Motherboard here it is.

1x DVI Female to HDMI Male converter SOLD

1x Keyboard USB to PS/2 Converter SOLD

<S>
  X
ID: Xcelsior
R.I.P. Fallen Friends & Family

"The only ones who should kill are those prepared to be killed"

Offline 1701E

  • Silver Member
  • ****
  • Posts: 1889
      • VBF-18 Bearcats
Re: Odds n' ends
« Reply #7 on: January 19, 2012, 11:24:11 AM »
Updated list:

6x IDE Cables

2x Mouse USB to PS/2 Converters

1x VGA Male-to-Male Cable

1x VGA Female to DVI Male converter

3x 80mm Fans. 1x Red, 1x Black, 1x Clear with Blue LED. ~30CFM each.

1x Used and Abused Logitech 3D Pro; Rudder is shot, plastic is broken in areas (nowhere that would cause pain to the user), Hat Switch is down to about 3 working views, all buttons work, Aileron/Elevator Axis work, Throttle works, The wire is not stock and is protruding out of the Stick Base as it would not fit in the original wire-hole. Stick still works for flying, but is likely best of used for parts.

1x Biostar 785GE Motherboard AM2+ Motherboard. Potentially Fried I had an incident a while back (which prompted a Motherboard/CPU upgrade) where a PCI Metal Cover fell on the Motherboard causing it to zap. It worked fine afterwards but was giving me some weird CPU errors that could have been purely the CPU (Never figured it out, got new parts instead). So if someone wants it and understands the risks of a potentially fried Motherboard here it is.  SOLD


<S>
  X
ID: Xcelsior
R.I.P. Fallen Friends & Family

"The only ones who should kill are those prepared to be killed"