Author Topic: Which Polymer should I use?  (Read 462 times)

Offline Getback

  • Platinum Member
  • ******
  • Posts: 6456
Which Polymer should I use?
« on: March 19, 2012, 09:13:28 PM »
Only case I ever wiped off with a shammy skin.


  Created by MyFitnessPal.com - Free Calorie Counter

Offline MaSonZ

  • Gold Member
  • *****
  • Posts: 2074
Re: Which Polymer should I use?
« Reply #1 on: March 19, 2012, 09:33:29 PM »
Phantom 410? Let me know how you like it. one of buddies is lookin for a new case, wouldnt mind pointing him to one if its well worth the money. having worked on the full tower Phantom, wouldnt mind working on its little sister for a buddy either.
"Only the dead have seen the end of war" - Plato
HogDweeb

Offline Getback

  • Platinum Member
  • ******
  • Posts: 6456
Re: Which Polymer should I use?
« Reply #2 on: March 19, 2012, 10:06:16 PM »
Easy as pie. Has a sub-floor of sorts where you can route the cables under the mainboard. Even the cable that goes to the 8 pin connection by the cpu. There are cages that come out for easy access to hard drives. Everything is snap in and out. The only issue I had was there are pins that hold the hard drive in that are mounted in rubber and slide off. Once off those rascals are hard to get back in.

The one word I used when building it was tight. There's plenty of room for all components but the specs are tight. The hard drive, DVD drive and video card all fit snuggly into their slots. This is good, nothing is loose. Plenty of places for more fans if needed. It comes with 3. One top, one front, and one back. Don't mess with the bundled wires for the fans. Just plug in the molex.

Then it is beautiful!

  Created by MyFitnessPal.com - Free Calorie Counter

Offline Getback

  • Platinum Member
  • ******
  • Posts: 6456
Re: Which Polymer should I use?
« Reply #3 on: March 22, 2012, 08:42:45 PM »
Well I thought that was as about as cool of a case as you can get without a custom paint job.

  Created by MyFitnessPal.com - Free Calorie Counter

Offline M0nkey_Man

  • Gold Member
  • *****
  • Posts: 2254
Re: Which Polymer should I use?
« Reply #4 on: March 22, 2012, 09:29:27 PM »
 :O
FlyKommando.com


"Tip of the dull butter knife"
delta07

Offline MaSonZ

  • Gold Member
  • *****
  • Posts: 2074
Re: Which Polymer should I use?
« Reply #5 on: March 22, 2012, 09:39:53 PM »
she sure is a beauty. I had a Phantom for 6 months or so, and albeit being a beautiful black, I had to change the color. did a Chrysler Blue and she looks even more beautiful. Indeed that is a nice red on the 410.  :salute
"Only the dead have seen the end of war" - Plato
HogDweeb