« previous next »
Pages: [1]   Go Down

Author Topic: Engine On/Off Issue  (Read 597 times)

Offline aztec

  • Silver Member
  • ****
  • Posts: 1778
Engine On/Off Issue
« on: September 01, 2012, 09:49:15 AM »
I have my Ch Fighterstick prorammed thru AH, I can start my engine with the button I have programmed for it but it does not shut engine down. I simply programmed the button to the e key.

I have a Squad Mate with the same issue, I'm curious if anyone else has had this problem. :salute
Logged

Offline Chalenge

  • Plutonium Member
  • *******
  • Posts: 15179
Re: Engine On/Off Issue
« Reply #1 on: September 01, 2012, 05:31:05 PM »
Is it possible that you might be changing modes and that the button has a different assignment in the second mode?
Logged
If you like the Sick Puppy Custom Sound Pack the please consider contributing for future updates by sending a months dues to Hitech Creations for account "Chalenge." Every little bit helps.

Offline Pyro

  • Administrator
  • Administrator
  • *****
  • Posts: 4020
      • http://www.hitechcreations.com
Re: Engine On/Off Issue
« Reply #2 on: September 04, 2012, 10:07:35 AM »
Are you using CH software to map it or are you mapping it in AH?
Logged

Offline 10thmd

  • Silver Member
  • ****
  • Posts: 1872
Re: Engine On/Off Issue
« Reply #3 on: September 04, 2012, 11:15:02 AM »
My issue was in the 410 when one engine had already shut down due to overheating.
My second engine recieved a rad hit and I couldn't shut it down. I always use the E key and never bind engine on/off to any of my controllers.
Logged
- Der Wander Zirkus -
“You can all go to hell; I will go to Texas

Offline aztec

  • Silver Member
  • ****
  • Posts: 1778
Re: Engine On/Off Issue
« Reply #4 on: September 19, 2012, 07:53:03 AM »
Quote from: Pyro on September 04, 2012, 10:07:35 AM
Are you using CH software to map it or are you mapping it in AH?
AH mapping Pyro.
Logged

Offline branch37

  • Silver Member
  • ****
  • Posts: 1831
      • VF-17 Jolly Rogers
Re: Engine On/Off Issue
« Reply #5 on: September 19, 2012, 11:35:44 AM »
Map the button to start/stop engine.  IIRC there are a few commands that can be mistaken for what you are trying to do.  I had the same problem with my X-52, I just had to find the correct command.
Logged

CMDR Branch37
VF-17 Jolly Rogers  C.O.

Offline fuzeman

  • Aces High CM Staff
  • Plutonium Member
  • *******
  • Posts: 8910
Re: Engine On/Off Issue
« Reply #6 on: September 19, 2012, 11:52:55 AM »
fication from Clara, I have a CH Pro usb Throttle and I have my button programmed under 'Mode 1 (Planes & Default), Flight, Engine Start/Stop' , that the one you are using?
Logged
Far too many, if not most, people on this Board post just to say something opposed to posting when they have something to say.

"Masters of the Air" Scenario - JG54
Pages: [1]   Go Up
« previous next »