KG 13(x) Control Stick
Basic Buttons Fw190DA-Knopf: 2x MG 151 (wing-root mounted), [only if installed: 2x MG 17 (fuselage mounted)]
B1-Knopf: [only if installed: 2x MG 151 cannons (wing mounted)]
B2-Knopf: drop ordnance
Buttons Bf109-G6Bf 109 G-6 without Rüstsatz R6 (two wing-mounted MG 151 cannons):
A-Knopf: 2x MG 131 (fuselage mounted)
B1-Knopf: 1x MG 151 (engine mounted)
B2-Knopf: drop ordnance
Bf 109 G-6 with Rüstsatz R6 (two wing-mounted MG 151 cannons):
A-Knopf: 2x MG 131 (fuselage mounted) and 1x MG 151 (engine mounted)
B1-Knopf: 2x MG 151 (in wing pods)
B2-Knopf: drop ordnance
Hitech should have the A8 root 20mm and hood MG13 tied together on one button and the wing 20mm\30mm on another. But, still allow fire All as an option.
A-Knopf is the lever which in safe mode is pulled back and up over B1-Knopf(top center button). To fire A-Knopf it is pushed down and forward used toggle a fire button like a trigger. The Wing root 20mm and hood MG13 fire together. B1-Knopf the top button is for the wing mounted 20mm or 30mm. All can be fired together by pulling the lever trigger and holding down on the button. In the picture below, B2-Knopf is the lower button on the left had side of the column which is used to drop ordnance. This whole thing with how weapons are mounted to buttons on the KG12 control stick should be revisited since it was specifically designed to service the multiple weapons options in the Luft in specific orders of button presses.
