« previous next »
Pages: [1]   Go Down

Author Topic: Garand question  (Read 541 times)

Offline Oldman731

  • Plutonium Member
  • *******
  • Posts: 9418
Garand question
« on: October 16, 2018, 12:42:56 PM »
Anyone have any experience with Garand Gear's ported gas plug http://www.garandgear.com/ported-gas-plug.html? I'm fussing with a cycling issue and was thinking this might help.

- oldman
Logged

Offline 1stpar3

  • Gold Member
  • *****
  • Posts: 3719
Re: Garand question
« Reply #1 on: October 16, 2018, 01:52:36 PM »
I have never had an issue...that being said..THIS WOULD cause an issue. Almost same in AR type Gas rings(little indents need to be spaced correctly)..only an issue after wear and boarder line cleaning in my experiences. One of those OOPS, forgot to get that adjusted/cleaned. :uhoh
Logged
"Life is short,break the rules,forgive quickly,kiss slowly,love truly,laugh uncontrollably,and never regret anything that made you smile."  “The two most important days in your life are the day you are born and the day you find out why.”- Mark Twain

Offline colmbo

  • Gold Member
  • *****
  • Posts: 2246
      • Photos
Re: Garand question
« Reply #2 on: October 18, 2018, 02:30:43 AM »
I have one but very limited experience.  I had installed the plug but then also used the "Garand specific" ammo which loaded to WWII pressures. I didn't need both, it would fire, eject but didn't have quite enough oomph to chamber the next round.  I was not able to return to the range.

What issue are you having?
Logged
Columbo

"When once you have tasted flight, you will forever walk the earth with your eyes turned skyward, for there you have been, and there you will always long to return."

Fate whispers to the warrior "You cannot withstand the storm" and the warrior whispers back "I AM THE STORM"

Offline mbailey

  • Platinum Member
  • ******
  • Posts: 5677
Re: Garand question
« Reply #3 on: October 18, 2018, 07:00:31 AM »
i Have 2 Garands (Springfield and an International Harvester) what issue are you having? Cycling issues and Want to try higher pressure factory ammo instead of M2 Ball? I will say the Garand Gears plug works very well, I had a third Garand that had one....I got it because I got a great deal on 2k rounds of 150 Core Lokt...functioned flawlessly and the op rod was just fine
« Last Edit: October 18, 2018, 07:05:26 AM by mbailey »
Logged
Mbailey
80th FS "Headhunters"
Ichi Go Ichi E
Character is like a tree and reputation like its shadow. The shadow is what we think of it; the tree is the real thing.

When the game is over, the Kings and Pawns all go into the same box.

Offline Oldman731

  • Plutonium Member
  • *******
  • Posts: 9418
Re: Garand question
« Reply #4 on: October 18, 2018, 07:15:11 AM »
Quote from: colmbo on October 18, 2018, 02:30:43 AM
What issue are you having?


Rifle will fire for awhile just fine, perhaps 20-30 rounds.  Then the bolt will jam shut on an unfired cartridge.  It takes quite a bit of force to open it, and of course quite a bit of care since there's an unfired round in the chamber.  This is using the Greek ammo from CMP.

Could be any number of things, of course, and I haven't had much opportunity to test it after making a few simple modifications.  But I came across the replacement gas port and thought it might be an option in any event.

- oldman
Logged

Offline Maverick

  • Plutonium Member
  • *******
  • Posts: 13919
Re: Garand question
« Reply #5 on: October 18, 2018, 10:44:43 AM »
I have the variable gas port on a Garand and set it to the particular ammo recipe that I loaded for it. My process was to set it way open then close it slowly until the action cycled reliably with the load. I then locked it down. No issues with it since then.

Your issue seems to be more ammo related. Is it clean? No corrosion on the cases? Is the chamber rough? Lastly is the op rod straight or slightly bent out of specs?

I would start over and set up the gun for it if you have a substantial amount of it to burn up. I am suspect of old ammo (40+ years and WW2 surplus) due to degradation of the powder and primer given the iffy storage it likely had over time. I am not really experienced with the Greek surplus either. I just load up my own Garand ammo, especially since I had it converted to 7.62 NATO by Springfield Armory a few years back. The 308 stuff is much easier /cheaper to find now, even surplus and it nowhere as old as the 30-06 surplus.
Logged
DEFINITION OF A VETERAN
A Veteran - whether active duty, retired, national guard or reserve - is someone who, at one point in their life, wrote a check made payable to "The United States of America", for an amount of "up to and including my life."
Author Unknown

Offline Vraciu

  • Plutonium Member
  • *******
  • Posts: 14139
Re: Garand question
« Reply #6 on: October 18, 2018, 10:46:30 AM »
Call Tom Gresham.   If he doesn’t know someone listening to the show will.   “Gun Talk” on Sundays...


I’ve always kept my M1s stock and they run flawlessly so I am of no help. 
Logged
”KILLER V”
Charter Member of the P-51 Mustang Skin Mafia
- THE DAMNED -
King of the Hill Champ Tour 219 - Win Percentage 100
"1v1 Skyyr might be the best pilot ever to play the game." - Via PM, Name Redacted

Offline Oldman731

  • Plutonium Member
  • *******
  • Posts: 9418
Re: Garand question
« Reply #7 on: October 18, 2018, 12:11:40 PM »
Quote from: Maverick on October 18, 2018, 10:44:43 AM
Your issue seems to be more ammo related. Is it clean? No corrosion on the cases? Is the chamber rough? Lastly is the op rod straight or slightly bent out of specs?


All good questions.  Clean it is.  Chamber seems bright.  Hope it doesn't turn out to be the operating rod, because those are quite expensive.  I'm thinking that possibly the recoil had moved the forend enough to partially block the gas port, so that the cycle wasn't far enough back.  Ammunition quality was one of my thoughts, but internet posters seem to be happy with the Greek stuff.  I'm ordering some Creedmoor M1 loadings to compare. 

Now I need a day alone to test it all out.  I find such days are increasingly rare.

Good thoughts, all, thank you.

- oldman
Logged

Offline Fencer51

  • Aces High CM Staff (Retired)
  • Platinum Member
  • ******
  • Posts: 4679
Re: Garand question
« Reply #8 on: October 21, 2018, 11:17:14 AM »
Anybody want to add to their Garand Collection?  Been trying to sell this one of mine on consignment. 

https://www.hoosierarmory.com/products/semi-automatic-winchester-winchester-m1-grand-icn7387

PM me if interested.
Logged
Fencer
The names of the irrelevant have been changed to protect their irrelevance.
The names of the innocent and the guilty have not been changed.
As for the innocent, everyone needs to know they are innocent –
As for the guilty… they can suck it.
Pages: [1]   Go Up
« previous next »