Author Topic: About Ready To Build A New Machine  (Read 7860 times)

Offline Spikes

  • Aces High CM Staff
  • Plutonium Member
  • *******
  • Posts: 15721
    • Twitch: Twitch Feed
Re: About Ready To Build A New Machine
« Reply #45 on: September 28, 2020, 08:26:05 PM »
An improvement with the RAM. $200 on an AIO is insane. You'd get better cooling out of a fan setup.
i7-12700k | Gigabyte Z690 GAMING X | 64GB G.Skill DDR4 | EVGA 1080ti FTW3 | H150i Capellix

FlyKommando.com

Offline Denniss

  • Nickel Member
  • ***
  • Posts: 607
Re: About Ready To Build A New Machine
« Reply #46 on: September 29, 2020, 09:50:38 AM »
10850K would have been a far better deal, just -100 MHz but also -100$

Offline Shuffler

  • Radioactive Member
  • *******
  • Posts: 27070
Re: About Ready To Build A New Machine
« Reply #47 on: September 29, 2020, 10:04:22 AM »
An improvement with the RAM. $200 on an AIO is insane. You'd get better cooling out of a fan setup.

If you are going to OC, you are better off with a liquid cooled system. The case will have 9 fans total.
80th FS "Headhunters"

S.A.P.P.- Secret Association Of P-38 Pilots (Lightning In A Bottle)

Offline Drano

  • Platinum Member
  • ******
  • Posts: 4125
Re: About Ready To Build A New Machine
« Reply #48 on: September 29, 2020, 10:17:45 AM »
That's why I went that way. Works like a champ. OC'd the old PC on air using a high end Zalmann (remember them?) cooler. That one's still running too. AIO wasn't available back in the day. Thought I'd give it a shot. So far so good. Even tho as a plumber you'd think I'd be perfectly OK going to a full on water cooled setup. I just... Can't! That whole water and electricity thing. Eventually I'll get over it and go there.

Sent from my Moto Z (2) using Tapatalk
"Drano"
80th FS "Headhunters"

S.A.P.P.- Secret Association Of P-38 Pilots (Lightning In A Bottle)

FSO flying with the 412th Friday Night Volunteer Group

Offline Shuffler

  • Radioactive Member
  • *******
  • Posts: 27070
Re: About Ready To Build A New Machine
« Reply #49 on: October 07, 2020, 07:23:51 AM »
All parts are in. I'll do some preliminary work in the afternoons and the build Saturday.
80th FS "Headhunters"

S.A.P.P.- Secret Association Of P-38 Pilots (Lightning In A Bottle)

Offline atlau

  • Silver Member
  • ****
  • Posts: 1221
Re: About Ready To Build A New Machine
« Reply #50 on: October 07, 2020, 09:29:39 AM »
All parts are in. I'll do some preliminary work in the afternoons and the build Saturday.

Thats some self control. I wouldn't be able to resist!

Offline Shuffler

  • Radioactive Member
  • *******
  • Posts: 27070
Re: About Ready To Build A New Machine
« Reply #51 on: October 07, 2020, 12:24:23 PM »
Thats some self control. I wouldn't be able to resist!

I did not say it was easy...... I am just really busy right now.   :neener:
80th FS "Headhunters"

S.A.P.P.- Secret Association Of P-38 Pilots (Lightning In A Bottle)

Offline Shuffler

  • Radioactive Member
  • *******
  • Posts: 27070
Re: About Ready To Build A New Machine
« Reply #52 on: October 10, 2020, 04:24:05 PM »
All up and loading my software.... MSFS2020 Premium, Red Dead II Ultimate, Adobe Cloud with full subscription, pictures, Videos I was working on...

Sent 2 sets of 3 pack lights back (Corsair LL) and 2 sets of QL coming. I am not overclocking it right now so the three fans on the rad should be ok for a few days.
80th FS "Headhunters"

S.A.P.P.- Secret Association Of P-38 Pilots (Lightning In A Bottle)

Offline Eagler

  • Plutonium Member
  • *******
  • Posts: 18207
Re: About Ready To Build A New Machine
« Reply #53 on: October 12, 2020, 07:14:55 AM »
How does it push AH?

Did you order your vr headset yet?

If not you are wasting that horsepower.

Eagler
"Masters of the Air" Scenario - JG27


Intel Core i7-13700KF | GIGABYTE Z790 AORUS Elite AX | 64GB G.Skill DDR5 | 16GB GIGABYTE RTX 4070 Ti Super | 850 watt ps | pimax Crystal Light | Warthog stick | TM1600 throttle | VKB Mk.V Rudder

Offline Shuffler

  • Radioactive Member
  • *******
  • Posts: 27070
Re: About Ready To Build A New Machine
« Reply #54 on: October 12, 2020, 07:30:52 AM »
How does it push AH?

Did you order your vr headset yet?

If not you are wasting that horsepower.

Eagler


AH doesn't even make it warm up.

Runs Red Dead Redemption 2 online on Ultra, and Microsoft Flight Simulator 2020 on Ultra smooth as silk.
80th FS "Headhunters"

S.A.P.P.- Secret Association Of P-38 Pilots (Lightning In A Bottle)

Offline Eagler

  • Plutonium Member
  • *******
  • Posts: 18207
Re: About Ready To Build A New Machine
« Reply #55 on: October 12, 2020, 09:12:21 AM »
Well there goes the crappy cpu excuse :)

<S>

Eagler
"Masters of the Air" Scenario - JG27


Intel Core i7-13700KF | GIGABYTE Z790 AORUS Elite AX | 64GB G.Skill DDR5 | 16GB GIGABYTE RTX 4070 Ti Super | 850 watt ps | pimax Crystal Light | Warthog stick | TM1600 throttle | VKB Mk.V Rudder

Offline Drano

  • Platinum Member
  • ******
  • Posts: 4125
Re: About Ready To Build A New Machine
« Reply #56 on: October 12, 2020, 09:50:02 AM »
Yeah my rig runs AH in VR (RiftS) pegged at 80FPS in all situations with all settings except environmental on high. Post lighting off, just don't like any of the effects. It'll dip into the low 50s in IL2 with a lot of clouds and stuff blowing up or on fire. There I have mods for the clouds and effects that are more better than stock and that's the price. But that's a different animal graphically from AH.

Sent from my Moto Z (2) using Tapatalk

"Drano"
80th FS "Headhunters"

S.A.P.P.- Secret Association Of P-38 Pilots (Lightning In A Bottle)

FSO flying with the 412th Friday Night Volunteer Group

Offline Max

  • Platinum Member
  • ******
  • Posts: 7766
Re: About Ready To Build A New Machine
« Reply #57 on: October 21, 2020, 12:17:30 PM »
I posted earlier but adjusted it some.....

PCPartPicker Part List

CPU: Intel Core i9-10900K 3.7 GHz 10-Core Processor  ($549.99 @ Newegg)
CPU Cooler: Corsair iCUE H150i ELITE CAPELLIX 75 CFM Liquid CPU Cooler  ($189.99 @ Best Buy)
Motherboard: Gigabyte Z490 AORUS ULTRA ATX LGA1200 Motherboard  ($289.99 @ Newegg)
Memory: Corsair Vengeance RGB Pro 64 GB (2 x 32 GB) DDR4-3600 CL18 Memory  (out of stock again as price not included)
Case: Lian Li PC-O11 Dynamic ATX Full Tower Case  ($139.99 @ Adorama)
Total: $1199.96
Prices include shipping, taxes, and discounts when available
Generated by PCPartPicker 2020-09-28 21:10 EDT-0400

I have Gigabyte RTX 2070, EVGA 1000 watt 80+ Gold modular, 2 x 860 EVO 1 TB drives, 6 x Corsair iCUE QL120 fans

Shuf if ya had to do it over again would you wait for the new Ryzen chips?

Offline Shuffler

  • Radioactive Member
  • *******
  • Posts: 27070
Re: About Ready To Build A New Machine
« Reply #58 on: October 21, 2020, 12:50:50 PM »
Shuf if ya had to do it over again would you wait for the new Ryzen chips?
No.. I am real happy with this setup.
80th FS "Headhunters"

S.A.P.P.- Secret Association Of P-38 Pilots (Lightning In A Bottle)

Offline Max

  • Platinum Member
  • ******
  • Posts: 7766
Re: About Ready To Build A New Machine
« Reply #59 on: October 21, 2020, 12:54:15 PM »
 :aok