« previous next »
Pages: [1] 2   Go Down

Author Topic: Taking the plunge  (Read 1345 times)

Offline Yooper

  • Zinc Member
  • *
  • Posts: 21
Taking the plunge
« on: May 26, 2021, 12:03:43 AM »
Well guys you talked me into it, I'm downloading AH3 now and coming back in.  Hopefully I'll get some game in tonight, but I'm sure getting the HOTAS all set up will take awhile. I hope I see some of you online.  These afternoon shifts stink!  Hitech really happy to see your baby aka project still around!
Logged

Offline Yooper

  • Zinc Member
  • *
  • Posts: 21
Re: Taking the plunge
« Reply #1 on: May 26, 2021, 12:29:48 AM »
Well I guess I'm not playing.  The game is really buggy for me.  I can't get it to play full screen, also won't let me calibrate the joysticks.  I'll try again later.  Anyway know any tips or tricks?
Logged

Offline Bizman

  • Plutonium Member
  • *******
  • Posts: 9693
Re: Taking the plunge
« Reply #2 on: May 26, 2021, 01:06:17 AM »
First thing to do is to check if your computer is up to the task. AH3 requires a gaming computer with a decent video card whereas AH2 was playable with an office PC with a higher end processor.

A DxDiag report sent as an attachment would be a good start. How to do that: https://bbs.hitechcreations.com/smf/index.php/topic,71591.msg3215282.html#msg3215282
Logged

Offline 1stpar3

  • Gold Member
  • *****
  • Posts: 3734
Re: Taking the plunge
« Reply #3 on: May 26, 2021, 04:04:12 AM »
Quote from: Yooper on May 26, 2021, 12:29:48 AM
Well I guess I'm not playing.  The game is really buggy for me.  I can't get it to play full screen, also won't let me calibrate the joysticks.  I'll try again later.  Anyway know any tips or tricks?
"Wont let me calibrate the joysticks?"  What Stick are you using? My Niece had a whole bunch of issues, when trying to Map Buttons/Controls(T1600). Get everything situated...log next day AND ZERO Axis's, Button Assignments-Trashed! I cant recall(DAMN MULTIPLE SCLEROSIS) what the "Tipping Point" was, but she hasnt had that issue for some time now...like 5 months!

"INPUT" as to what we are dealing with? PLEASE!!!! Another OG?  I just found this in 2014....Missed out on some Awesome Fun? SHOOT, I am having fun as it is, these days!
 If you can figure out your problem, and need help "Modernizing" your Rig....just holler! I might be able to help! How am I supposed to Test Myself, against you guys(OGs) if ya'll aint in game!!!? YES...serious!
  Its just an investment into my AH fun! YES!!! I am selfish like that! :devil :x :rofl :cheers:
« Last Edit: May 26, 2021, 04:09:04 AM by 1stpar3 »
Logged
"Life is short,break the rules,forgive quickly,kiss slowly,love truly,laugh uncontrollably,and never regret anything that made you smile."  “The two most important days in your life are the day you are born and the day you find out why.”- Mark Twain

Offline Yooper

  • Zinc Member
  • *
  • Posts: 21
Re: Taking the plunge
« Reply #4 on: May 26, 2021, 10:54:33 AM »
I have the T16000.  It's not my pc.  I just bought it.  Has a I7 processor, 3060 GPU and 16gig DDR 4 3000 so that's not the issue.  I was having issues with it loading on the wrong screen and couldn't get it to switch over, then when I would clip on the clip board on the main screen (prior to going in the game) it would get really small and hard to read.

I don't remember it being this confusing before.  I'm a lot older now though.

Logged

Offline LNG15

  • Nickel Member
  • ***
  • Posts: 379
    • Twitch: Twitch Feed
Re: Taking the plunge
« Reply #5 on: May 26, 2021, 11:18:12 AM »
Quote from: Yooper on May 26, 2021, 10:54:33 AM
I have the T16000.  It's not my pc.  I just bought it.  Has a I7 processor, 3060 GPU and 16gig DDR 4 3000 so that's not the issue.  I was having issues with it loading on the wrong screen and couldn't get it to switch over, then when I would clip on the clip board on the main screen (prior to going in the game) it would get really small and hard to read.

I don't remember it being this confusing before.  I'm a lot older now though.

Check your resolution Yooper. Usually, if that is the case then it should be no issue.
Logged
Be Prepared To "Get Lanced!"

Offline Yooper

  • Zinc Member
  • *
  • Posts: 21
Re: Taking the plunge
« Reply #6 on: May 26, 2021, 11:55:55 AM »
I'm an idiot I had the wrong monitor selected in the settings.  Ok I have it all set up, and on auto-takeoff, but when I give it throttle it just sits there.  I can't find a brake release button so I'm not sure what I"m doing wrong.

Also, does anyone have the old settings the site had for setting up dead zone and all that to take care of the bounce?  I can't seem to find any templates
Logged

Offline whiteman

  • Platinum Member
  • ******
  • Posts: 4229
Re: Taking the plunge
« Reply #7 on: May 26, 2021, 11:58:45 AM »
No brake release so either the throttle axis needs to be assigned, maybe inverted or calibration in AH.
Logged

Offline Yooper

  • Zinc Member
  • *
  • Posts: 21
Re: Taking the plunge
« Reply #8 on: May 26, 2021, 12:15:21 PM »
Yeah I had a setting wrong when I was mapping.  Anyway, does anyone remember where to look where there was a tutorial on how to set up your axis with deadzone and such?  I'm looking but can't find anything.  Thanks so much for the help guys I'll see you online tonight after work!
Logged

Offline svaalbar

  • Nickel Member
  • ***
  • Posts: 409
Re: Taking the plunge
« Reply #9 on: May 26, 2021, 12:33:17 PM »
In the menu, go to Options, then Controls, Map Controllers, select your joystick (in this pic I'm using my rudder pedals), click the axis you want to finetune or add deadbands to, then check the Advanced checkbox. Then you get little bars for sensitity and stuff like in the image below

https://i.imgur.com/R7UUcFk.png
Logged
"All fighter pilots were a little crazy, but mostly the nicest guys you'd ever meet." The Biography of a Rabbit, by Roy Benson Jr - https://gutenberg.org/files/7190/7190-h/7190-h.htm

https://www.youtube.com/channel/UCaKxx5UhMZ0REI8E2FGfGag

Offline whiteman

  • Platinum Member
  • ******
  • Posts: 4229
Re: Taking the plunge
« Reply #10 on: May 26, 2021, 12:37:42 PM »
If no one has an answer I'll screen shot mine when i get home. Mine use to be zero all the way across but I had a long break and had to adjust mine because i was flopping and stalling. Half of it was my stick was bad and i don't think i reset to zero after getting a new one.

edit: Boy i was slow lol
Logged

Offline Yooper

  • Zinc Member
  • *
  • Posts: 21
Re: Taking the plunge
« Reply #11 on: May 26, 2021, 02:17:35 PM »
I have all my axis set up and most of my buttons, went into offline mode and tested it out.  I have a few more minor tweaks to make.  I might not need the deadzone stuff, I just know back in the day there were settings you needed to make.

That might not be the case anymore.  So just asking for some guidance.  :)
Logged

Offline Cluzig

  • Copper Member
  • **
  • Posts: 116
Re: Taking the plunge
« Reply #12 on: May 26, 2021, 02:30:39 PM »
The T16000M uses magnetic sensors for x and y axis. You shouldn't require much deadband at all or really tweaking stick settings much
Logged

Offline Yooper

  • Zinc Member
  • *
  • Posts: 21
Re: Taking the plunge
« Reply #13 on: May 26, 2021, 02:42:50 PM »
Great guys that's what I was looking for.  Thanks everyone for your help.  If any of you are on around midnight tonight EST let me know!  Maybe we can wing up and I can see how rusty I've gotten. 
Logged

Offline RichardDarkwood

  • Silver Member
  • ****
  • Posts: 1926
Re: Taking the plunge
« Reply #14 on: May 26, 2021, 02:46:24 PM »
Quote from: Yooper on May 26, 2021, 10:54:33 AM
I have the T16000.

I love my T16000 H.O.T.A.S.

coming from a Logitec 3d pro its a whole different world.

Glad your back
Logged
A yappy back seater like Jester wasn’t popular or fun to fly with, more of an unnecessary distraction than anything else---Puma44

https://www.twitch.tv/hounds_darkwood
CO--The Bad Guys
Pages: [1] 2   Go Up
« previous next »