Did some heavy playing there.
Smart going after the BIOS.
You may squeeze more than 60fps. You have some headroom.
Low Latency: off (or Ultra?)
“Off”: prioritizes render throughput by allowing games to queue frames. Good for CPU-heavy games or when your GPU has plenty of power
If I remember right, AH uses a single CPU core, DCS I would assume being a new game uses all cores as needed.
------
You may benefit from these 2 tweaks in combo
Change the Power Plan
Power plans in Windows control how your PC consumes/saves power. Microsoft introduced a power plan called Ultimate Performance for workstations, which can provide a performance boost.
On a side note, this works hand and hand with disabling CPU Parking below.
By default this power plan is a hidden feature, but you can use the following steps to enable it:
1) Open the Run dialog “Window key + R”, or search in Start Menu. Type or copy and paste powercfg.cpl and press Enter.
2) Select Ultimate Performance. If you don’t see this power plan, simply continue to the next step to unhide it.
3) Open Start Menu, type cmd () in the search bar. Select Command Prompt and Run as Administrator.
4) In the Command Prompt, type or paste the following command and press Enter.
powercfg -duplicatescheme e9a42b02-d5df-448d-aa00-03f14749eb61
If you see a prompt similar to this, return to step 2 to enable the Ultimate Performance power plan.
Disabling CPU Parking
CPU Parking is a low-power sleep state that disables CPU cores to conserve power when idle, but it results in latency when the CPUs need to be unparked to execute code.
This works hand and hand with the Power Plan tweak above. If you choose to disable it return to Change the Power Plan section above in this page.
To disable CPU Parking:
1) Open Start Menu, type Run in the search bar, and open it.
2) Navigate to the following registry key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power\PowerSettings\54533251-82be-4824-96c1-47b60b740d00\0cc5b647-c1df-4637-891a-dec35c318583
(HKEY_LOCAL_MACHINE > SYSTEM > CurrentControlSet > Control > Power > PowerSettings > 54533251-82be-4824-96c1-47b60b740d00 > 0cc5b647-c1df-4637-891a-dec35c318583)
(Or search in Registry Editor for 0cc5b647-c1df-4637-891a-dec35c318583)
3) Click to open the key and change the Attribute key value from “1” to “0“.
-----
Same with this one;
Disable Universal Serial Bus Controllers sleep mode
How to disable USB ports from automatically entering sleep mode on Windows. When the USB port enters sleep mode, it can cause a peripheral to “time out” and become unresponsive to the operating system.
1) Right Click the Start Menu Icon on lower left of screen. Select Device Manager to open it.
2) Scroll to the bottom and click the arrow next to Universal Serial Bus Controllers to expand the list.
3) Right click each item that has HUB in it and select Properties
4) Click the Power Management tab.
5) Make sure the Allow computer to turn off this device to save power box is unchecked on all HUBs that allow it.
6) Click OK to close the window.
-----
There's some tweaks here if you already haven't checked into them.
https://animl-aw.com/windows-11-system/
