Author Topic: MetaQuest goggles are not working since the VR update.  (Read 180 times)

Offline MajorDan

  • Zinc Member
  • *
  • Posts: 3
MetaQuest goggles are not working since the VR update.
« on: November 16, 2026, 12:37:58 PM »
Hi,
Has anyone suddenly found their MetaQuest goggles disconnecting when the game starts since the new VRT update?
I've not changed my configuration or any files, and it suddenly won't function once the game starts. 
I've tried a variety of "fixes" from the Meta site as well as Steam.  My AI can't even figure it out.   
I'm unable to use them and about ready to just call it a day......  Any advice would be greatly appreciated.

Offline hitech

  • Administrator
  • Administrator
  • *****
  • Posts: 12700
      • http://www.hitechcreations.com
Re: MetaQuest goggles are not working since the VR update.
« Reply #1 on: November 16, 2026, 02:53:06 PM »
MajorDan, a few questions so I can track this down:

1. How do you start the game: Steam, the Meta store, or our installer's desktop icon?
2. How is the Quest connected: Link cable, Air Link or Virtual Desktop?
3. In the Meta Horizon Link app (Settings, General), which is set as the OpenXR runtime: Meta or SteamVR?
4. Which VR questions do you get when the game starts, and what do you answer?
5. When the headset disconnects, does the game keep running on your monitor, or does it close?
6. If it closes, look in the temp folder inside your Aces High III folder for a .dmp file from that time. Zip it and attach it here.

One thing to try: Patch 3 no longer asks about OpenXR. If you answered Yes to OpenXR before Patch 3, add -mode openxr to the end of the Target in your Aces High shortcut (in Steam: right-click Aces High III, Properties, Launch Options) and start the game. Tell me whether that works.

HiTech

Offline hitech

  • Administrator
  • Administrator
  • *****
  • Posts: 12700
      • http://www.hitechcreations.com
Re: MetaQuest goggles are not working since the VR update.
« Reply #2 on: November 16, 2026, 03:19:03 PM »
MajorDan, please try this test version (test 4):
https://dload.hitechcreations.com/aceshigh11vrtest4.exe

Put it in the ah32 folder inside your Aces High III folder (next to aceshigh11.exe) and double-click it to start the game.

Test 4 puts the VR start-up back exactly the way it was before Patch 2, before OpenXR was added: it asks Oculus first, then Steam (OpenVR). Please tell me whether the Quest stays connected, and the answers to the questions above.

HiTech

Offline Eagler

  • Radioactive Member
  • *******
  • Posts: 20489
Re: MetaQuest goggles are not working since the VR update.
« Reply #3 on: November 16, 2026, 04:46:02 PM »
test3.exe was working fine with my quest 2 last night..

I use the link cable..

Eagler


Intel Core i7-13700KF | GIGABYTE Z790 AORUS Elite AX | 64GB G.Skill DDR5 | 16GB GIGABYTE RTX 4070 Ti Super | 850 watt ps | Pimax Crystal Super | Warthog stick | TM1600 throttle | VKB Mk.V Rudder

Offline JoeZee

  • Zinc Member
  • *
  • Posts: 14
Re: MetaQuest goggles are not working since the VR update.
« Reply #4 on: November 16, 2026, 05:46:03 PM »
So now I have to reinstall Steam.  OpenXR was better than Steam.

Offline hitech

  • Administrator
  • Administrator
  • *****
  • Posts: 12700
      • http://www.hitechcreations.com
Re: MetaQuest goggles are not working since the VR update.
« Reply #5 on: Yesterday at 07:28:47 AM »
So now I have to reinstall Steam.  OpenXR was better than Steam.

with patch 3 but still run open XR with a command line -mode openXR

Offline hitech

  • Administrator
  • Administrator
  • *****
  • Posts: 12700
      • http://www.hitechcreations.com
Re: MetaQuest goggles are not working since the VR update.
« Reply #6 on: Yesterday at 08:34:49 AM »
JoeZee, here is test 5, which keeps OpenXR:
https://dload.hitechcreations.com/aceshigh11vrtest5.exe

Put it in the ah32 folder inside your Aces High III folder (next to aceshigh11.exe). OpenXR starts only with -mode openxr. Without it, the game asks Oculus, then Steam, the same as before Patch 2.

To run test 5 with -mode openxr: right-click aceshigh11vrtest5.exe, Send to, Desktop (create shortcut). Right-click the new shortcut, Properties, and add -mode openxr to the end of the Target.

Once this is in a patch, Steam players can put -mode openxr in Launch Options instead (right-click Aces High III in Steam, Properties).

Please tell me whether OpenXR works for you with test 5.

HiTech

Offline JoeZee

  • Zinc Member
  • *
  • Posts: 14
Re: MetaQuest goggles are not working since the VR update.
« Reply #7 on: Yesterday at 08:17:22 PM »
JoeZee, here is test 5, which keeps OpenXR:
https://dload.hitechcreations.com/aceshigh11vrtest5.exe

Put it in the ah32 folder inside your Aces High III folder (next to aceshigh11.exe). OpenXR starts only with -mode openxr. Without it, the game asks Oculus, then Steam, the same as before Patch 2.

To run test 5 with -mode openxr: right-click aceshigh11vrtest5.exe, Send to, Desktop (create shortcut). Right-click the new shortcut, Properties, and add -mode openxr to the end of the Target.

Once this is in a patch, Steam players can put -mode openxr in Launch Options instead (right-click Aces High III in Steam, Properties).

Please tell me whether OpenXR works for you with test 5.

HiTech

Does not work for me

Offline JoeZee

  • Zinc Member
  • *
  • Posts: 14
Re: MetaQuest goggles are not working since the VR update.
« Reply #8 on: Today at 08:37:39 AM »
SNO gave me the answer. 

It worked for my pimax crystal light, just put a space after the quotation and type -mode openxr
Should look like this:

"C:\Hitech Creations\Aces High III\ah32\aceshigh11vrtest5.exe" -mode openxr