« previous next »
Pages: [1]   Go Down

Author Topic: CHF16,chthrottl,rudders ?  (Read 360 times)

Offline JAZBO1

  • Zinc Member
  • *
  • Posts: 50
CHF16,chthrottl,rudders ?
« on: May 05, 2002, 02:06:08 PM »
I have a CH F-16 Fighterstick,CH throttle and the CH rudder peddlas. I also have the SB Live x-gamer sound card. Cant get none of my hat switches and most the butons dont work. Tried speedkeys and it wont find my J/S..anyone have any Ideas:)
Jazbo
Logged

Offline Sox62

  • Silver Member
  • ****
  • Posts: 1159
CHF16,chthrottl,rudders ?
« Reply #1 on: May 05, 2002, 05:34:42 PM »
Are you using Windows XP? And is your gear USB?
Logged

Offline JAZBO1

  • Zinc Member
  • *
  • Posts: 50
CHF16,chthrottl,rudders ?
« Reply #2 on: May 05, 2002, 08:31:40 PM »
win98 version 4.10...the J/S are gameports plugins.
Logged

Offline Sox62

  • Silver Member
  • ****
  • Posts: 1159
CHF16,chthrottl,rudders ?
« Reply #3 on: May 05, 2002, 08:42:22 PM »
Ok....as per Ch Products help,try a cold boot.

 Reboot your system,and as you do,hold the three throttle buttons in for three seconds as it starts....then release them.

 See if Speedkeys will recognize your stick after that.
Logged

Offline 1stnastySQUID

  • Zinc Member
  • *
  • Posts: 8
CHF16,chthrottl,rudders ?
« Reply #4 on: May 06, 2002, 12:35:26 AM »
:D
Hiya JAZBO,
I saw yur post and checked into it..
this is from the CH tech support website.....

Speedkeys will only work with the CH Pro Throttle and the CH F-16 Fighterstick. The CH Throttle must use throttle.exe for use in programming its buttons. As of today, there are no plans on making a Windows based utility for programming the CH Throttle.
Source from CH website

Throttle.exe  download

You stated that you have...
<Jazbo>>

Hope this will help
                                       SQUID
Logged

Offline JAZBO1

  • Zinc Member
  • *
  • Posts: 50
CHF16,chthrottl,rudders ?
« Reply #5 on: May 06, 2002, 08:16:34 PM »
tried the cold boot....no good...
Logged

Offline Dago

  • Parolee
  • Platinum Member
  • ******
  • Posts: 5324
CHF16,chthrottl,rudders ?
« Reply #6 on: May 06, 2002, 10:15:04 PM »
Spent a little time on the phone with CH tech support weenie today myself. My Pro Throttle quit.  They told me that I need USB stuff as the MB gameport is choking my input, that the original stuff (pre USB) was only upgraged to 100mhz bus speed at best, and I am running much higher with new system.

hmmm, now contemplating about $300 worth of stuff. bummer.

I really like the CH stuff, but hate to drop those bucks after just building up a new system a month ago.

dago
Logged
"Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in sideways, chocolate in one hand, martini in the other, body thoroughly used up, totally worn out and screaming "WOO HOO what a ride!"

Offline Wanker

  • Platinum Member
  • ******
  • Posts: 4030
CHF16,chthrottl,rudders ?
« Reply #7 on: May 07, 2002, 03:59:43 PM »
Dago, can you say "Thrustmaster Cougar HOTAS"?

I knew you could!

I just wish I could use your excuse to justify it to the wife when mine arrives. :)
Logged
Pages: [1]   Go Up
« previous next »