« previous next »
Pages: [1]   Go Down

Author Topic: My Ping Plot  (Read 383 times)

Offline DFAMSGT

  • Zinc Member
  • *
  • Posts: 6
My Ping Plot
« on: May 12, 2002, 02:56:28 PM »
Well, here is my Ping plot, I highlighted the last 4 hops, since they seem to be the ones that may be causeing me some problems.  I have very little lag, but when I attack a base or get into a furball, my lag goes thru the ceiling, and I can't fly. Now, here are the setting I have on for my registry and modem:

TCP options string = 020405b40103030301010402
    MTU = 1500
    MTU is fully optimized for broadband.
    MSS = 1460
    Maximum useful data in each packet = 1460, which is equal to MSS.
    Default Receive Window (RWIN) = 513920
    RWIN Scaling (RFC1323) = 3 bits
    Unscaled Receive Window = 64240
    RWIN is a multiple of MSS
    Other values for RWIN that might work well with your current MTU/MSS:
    256960 (MSS x 44 * scale factor of 4)
    128480 (MSS x 44 * scale factor of 2)
     64240 (MSS x 44)
    bandwidth * delay product:
    Your RcvWindow limits you to: 20556.8 kbps (2569.6 KBytes/s) @ 200ms
    Your RcvWindow limits you to: 8222.72 kbps (1027.84 KBytes/s) @ 500ms
    MTU Discovery (RFC1191) = ON
    Time to live left = 54 hops
    TTL value is ok.
    Timestamps (RFC1323) = OFF
    Selective Acknowledgements (RFC2018) = ON
    IP type of service field (RFC1349)= 00000000
Any suggestions on what values I can change to get less warps when I "mix it up?  Tks:confused:
Logged

Offline Frost

  • Copper Member
  • **
  • Posts: 281
My Ping Plot
« Reply #1 on: May 12, 2002, 08:09:11 PM »
Well I can't see any information on your route in the info you provided.  But it sounds like you may be talking about frame rates rather than lag when you talk of things getting bad around bases or furballs.  Your "lag" won't increase around bases or furballs but your FPS will drop.
Logged

Offline DFAMSGT

  • Zinc Member
  • *
  • Posts: 6
My Ping Plot
« Reply #2 on: May 13, 2002, 09:55:25 PM »
Actually, it never happens in the training or combat arena at all.  I can mix it up while attacking a base, get into furballs and the frame rate drops just a hair, but no warps or freezes...
Logged

Offline Lephturn

  • Silver Member
  • ****
  • Posts: 1200
      • http://lephturn.webhop.net
My Ping Plot
« Reply #3 on: May 14, 2002, 09:15:30 AM »
Go get http://www.pingplotter.com and run a trace to tpl.hitechcreations.com

From the edit menu in Ping Plotter you can choose 'copy as picture' and then paste the results into Paint.  Save it as a .jpg and then attach the picture to a BBS post in the Internte Connectivity forum.
Logged

Archer

  • Guest
Re: My Ping Plot
« Reply #4 on: May 31, 2002, 05:22:29 AM »
Quote
Originally posted by DFAMSGT

Any suggestions on what values I can change to get less warps when I "mix it up?  Tks:confused:


What hardware you have?
Logged
Pages: [1]   Go Up
« previous next »