Author Topic: CH pro pedal problem (Read 604 times)

Fariz · « **on:** July 18, 2002, 07:58:45 AM »

HI all,

I got a strange problem with pedals, need to know if anyone had same problem before, and if yes what is a possible fix.

When I press ruder pedal, ruder react slowly sometime, it can start slow, then jump to right position. If I keep pedals in some fixed position, the ruder can start moving itself, it goes slowly toward center, then after 3-4 seconds jumps back into correct position.

I played with dumping and dead band, no help. Calibrated in CH soft, windows and in AH.

Interesting, that when I leave in alone for some time, this problem is bigger. When I use pedals, after some time they start working ok. It seems as if the "freezed" when I do not use them.

Will apreciate any tips or help,

Fariz

Otto · « **Reply #1 on:** July 18, 2002, 11:08:31 AM »

Does this happen in all your flight sims or just AH? ie: is it AH or hardware related?

Fariz · « **Reply #2 on:** July 18, 2002, 11:28:07 AM »

Not only in AH.

Eagler · « **Reply #3 on:** July 18, 2002, 11:55:27 AM »

USB?

I used to have strange issues with USB peds and X36 hotas until I started using a powered USB hub. I think it helps the devices get enough juice. Just a guess...

Fariz · « **Reply #4 on:** July 18, 2002, 11:59:49 AM »

I think it is hardware. It works fine, then make start working terribly. Last time I just shaked pedals, then it became ok. Probably, somewhere something is not screwed in tough, or something contacting. Probably need to open and check all the contacts.

Bonden · « **Reply #5 on:** July 18, 2002, 12:21:57 PM »

Before you open that up, you may want to go to http://www.chproducts.com - and send em an e-mail about the trouble you are having.

Luck

Bonden

SKurj · « **Reply #6 on:** July 18, 2002, 01:24:15 PM »

sounds like a dirty or BAD pot...
OR something loose...

SKurj

airspro · « **Reply #7 on:** July 18, 2002, 02:56:49 PM »

Fariz : My second set did just about what you wrote about . It's hardware IMO . I took them apart and one of the rollers had come out of place and and the axial for it was under the slider and was muching up stuff . Got it sorted out and put it back together and np now . I place a pick of the insides for u .

They are right , it's a chore to get them back together "right" again but it's doable for sure .

Fariz · « **Reply #8 on:** July 18, 2002, 03:10:27 PM »

Quote

Originally posted by airspro
Fariz : My second set did just about what you wrote about . It's hardware IMO . I took them apart and one of the rollers had come out of place and and the axial for it was under the slider and was muching up stuff . Got it sorted out and put it back together and np now . I place a pick of the insides for u .

They are right , it's a chore to get them back together "right" again but it's doable for sure .

Thanks Airspro, all. It is working now, if it will start doing weird things again, I will open and check it.

airspro · « **Reply #9 on:** July 18, 2002, 03:30:46 PM »

NP at all mate . Your post got me off my bellybutton , now I got my first set up and working again . They had a slip connector that was lose , I just took a pair of pliars and squezzed it down and working fine .

cheers spro

Bonden · « **Reply #10 on:** July 23, 2002, 01:38:42 AM »

Say Airspro - one of my toe brakes on the CH USB rudder pedals has stopped working, any ideas about that pls

??

Thanks

Bonden

airbull · « **Reply #11 on:** July 23, 2002, 04:18:23 AM »

Wires busted from micro switch need to take apart & join back up

Bonden · « **Reply #12 on:** July 24, 2002, 09:57:10 AM »

Thanks for the reply - guess I'll have to take it apart:eek:

Bonden

funkedup · « **Reply #13 on:** July 25, 2002, 03:03:42 AM »

I had this too, sent the pedals back to CH, and they are still working on fixing it.

Bonden · « **Reply #14 on:** July 28, 2002, 12:11:33 PM »

Airbull:

I have the pedals apart and find a brown wire not attached to anything. There are three lugs on the micro-switch. The laft has 2 green wires, the right has 2 blue wires, the middle has 1 purple wire. I'm assuming the brown wire should attach to the middle lug with the purple wire - any ideas ???

thanks in advance

Bonden