« previous next »
Pages: 1 ... 3 4 5 [6] 7   Go Down

Author Topic: I'll show you mine if you show me yours !  (Read 1897 times)

Offline Puck

  • Gold Member
  • *****
  • Posts: 2980
I'll show you mine if you show me yours !
« Reply #75 on: October 01, 2002, 12:31:13 PM »
Quote
Originally posted by moose
[Boh, why a kt333 and not the kt400 which just came out? :-) [/B]


Because the KT400 just came out, mostly.  When I need new CPUs I'll get new MBs to put under them.  I try to stay away from stuff that was released yesterday  :)
Logged
//c coad  c coad run  run coad run
main (){char _[]={"S~||(iuv{nkx%K9Y$hzhhd\x0c"},__
,___=1;for(__=___>>___;__<((___<<___<<___<<___<<___
)+(___<<___<<___<<___)-___);__+=___)putchar((_[__
])+(__/((___<<___)+___))-((___&

Offline hblair

  • Platinum Member
  • ******
  • Posts: 4052
      • http://www.cybrtyme.com/personal/hblair/mainpage.htm
Revised cockpit
« Reply #76 on: October 01, 2002, 12:39:59 PM »
I threw this rig together over the weekend. My desk just wasn't comfortable and I had always wanted something more prctical so I picked up a lexus seat from my friend at the local salvage yard (didn't cost a dime :)) I made the frame out of some scrap wood we had laying around the shop. Base is 2X4 with 3/4" plywood. Console thingy I welded the frame up out of some extra angle steel we had, screwed some 1/2" plywood to it and then covered it all with some auto carpet I picked up at wal mart for $8 a roll (2 rolls). Bought some cheap altec lansing gaming speakers for about 30 bucks at office max and mounted the woofer in the console.

I got an old power supply I had laying around to power the seat and a future CD player. Mounted it to the side of the base, screwed the seat down, screwed my hofmann simpeds down, screwed my monitor down (did a lot of screwing). I made an arm to hold my joystick out of some 2 inch flat bar and a door hinge. It swings out of the way when I get up. It's working out pretty good. Gotta route the wires inside the base, etc.
Logged

Offline hblair

  • Platinum Member
  • ******
  • Posts: 4052
      • http://www.cybrtyme.com/personal/hblair/mainpage.htm
I'll show you mine if you show me yours !
« Reply #77 on: October 01, 2002, 12:44:53 PM »
More...
Logged

Offline hblair

  • Platinum Member
  • ******
  • Posts: 4052
      • http://www.cybrtyme.com/personal/hblair/mainpage.htm
I'll show you mine if you show me yours !
« Reply #78 on: October 01, 2002, 12:49:29 PM »
Joystick down, seat forward...
Logged

Offline Wlfgng

  • Platinum Member
  • ******
  • Posts: 5252
      • http://www.nick-tucker.com
I'll show you mine if you show me yours !
« Reply #79 on: October 01, 2002, 01:13:29 PM »
ok.. make me one but with a place for my throttle :)
Logged

Offline Flossy

  • Aces High CM Staff (Retired)
  • Plutonium Member
  • *******
  • Posts: 11070
      • Flossy's Website
I'll show you mine if you show me yours !
« Reply #80 on: October 01, 2002, 02:55:47 PM »
OK.... now I've tidied it up (honestly! :D) here's mine.....
Logged
Flossy {The Few}
Female Flying For Fun

Offline Flossy

  • Aces High CM Staff (Retired)
  • Plutonium Member
  • *******
  • Posts: 11070
      • Flossy's Website
I'll show you mine if you show me yours !
« Reply #81 on: October 01, 2002, 03:03:43 PM »
Keyboard area....
Logged
Flossy {The Few}
Female Flying For Fun

Offline Eagler

  • Plutonium Member
  • *******
  • Posts: 18766
I'll show you mine if you show me yours !
« Reply #82 on: October 01, 2002, 03:05:04 PM »
hblair

take a pix with you in it

the peds look like they'd be hard to reach

nice seat btw
Logged
"Masters of the Air" Scenario - JG27


Intel Core i7-13700KF | GIGABYTE Z790 AORUS Elite AX | 64GB G.Skill DDR5 | 16GB GIGABYTE RTX 4070 Ti Super | 850 watt ps | pimax Crystal Light | Warthog stick | TM1600 throttle | VKB Mk.V Rudder

Offline Flossy

  • Aces High CM Staff (Retired)
  • Plutonium Member
  • *******
  • Posts: 11070
      • Flossy's Website
I'll show you mine if you show me yours !
« Reply #83 on: October 01, 2002, 03:05:55 PM »
and underneath.....
Logged
Flossy {The Few}
Female Flying For Fun

Offline Reschke

  • Platinum Member
  • ******
  • Posts: 7724
      • VF-17 "The Jolly Rogers"
I'll show you mine if you show me yours !
« Reply #84 on: October 01, 2002, 03:15:02 PM »
Nice setup HB. I never would have thought of using an old power supply to power a seat like that. I need to see if I can find something similar when I get moved into the house soon. Of course that will be the end of AH for a while but at least I will have something for flying IL-2. I just need to figure out a way to mount my Cougar throttle and stick in a fashionable way. :D
Logged
Buckshot
Reschke from March 2001 till tour 146
Founder and CO VF-17 Jolly Rogers September 2002 - December 2006
"I'm baaaaccccckkk!"

Offline Revvin

  • Silver Member
  • ****
  • Posts: 1724
      • http://www.ch-hangar.com
I'll show you mine if you show me yours !
« Reply #85 on: October 01, 2002, 03:31:21 PM »
Reschke> I'd recommend one of these:



You can download the plans freely here
Logged

Offline air_guard

  • Nickel Member
  • ***
  • Posts: 380
wish i had some space in the weekdays..
« Reply #86 on: October 01, 2002, 04:27:30 PM »
cramped at the cell when at the camp area :D
Logged

Offline AKDejaVu

  • Platinum Member
  • ******
  • Posts: 5049
      • http://www.dbstaines.com
I'll show you mine if you show me yours !
« Reply #87 on: October 01, 2002, 04:45:25 PM »
Flossy... is that a functional MFD?  Where'd ya get it?

AKDejaVu
Logged

Offline humble

  • Platinum Member
  • ******
  • Posts: 6434
Re: Revised cockpit
« Reply #88 on: October 01, 2002, 04:47:05 PM »
Quote
Originally posted by hblair
I threw this rig together over the weekend. My desk just wasn't comfortable and I had always wanted something more prctical so I picked up a lexus seat from my friend at the local salvage yard (didn't cost a dime :)) I made the frame out of some scrap wood we had laying around the shop. Base is 2X4 with 3/4" plywood. Console thingy I welded the frame up out of some extra angle steel we had, screwed some 1/2" plywood to it and then covered it all with some auto carpet I picked up at wal mart for $8 a roll (2 rolls). Bought some cheap altec lansing gaming speakers for about 30 bucks at office max and mounted the woofer in the console.

I got an old power supply I had laying around to power the seat and a future CD player. Mounted it to the side of the base, screwed the seat down, screwed my hofmann simpeds down, screwed my monitor down (did a lot of screwing). I made an arm to hold my joystick out of some 2 inch flat bar and a door hinge. It swings out of the way when I get up. It's working out pretty good. Gotta route the wires inside the base, etc.




to steal someone elses line....

three year old mode engaged...

I want
I want
I want

Wow....great rig
Logged

"The beauty of the second amendment is that it will not be needed until they try to take it."-Pres. Thomas Jefferson

Offline JB73

  • Plutonium Member
  • *******
  • Posts: 8780
I'll show you mine if you show me yours !
« Reply #89 on: October 01, 2002, 05:02:55 PM »
u know after seeing all these i got 1 comment.....

we all know how smoke (cigs) and PC react.

some of my friends think im nutz to smoke around my PC... and rightfully so .. i burned out a motherboard cause smoke residue got in the memory slots and shorted the 5.5v power throughout the board :(

anyway i think it's kinda suprising how many of your rigs have an ashtray clearly visible.

you should all know better .. like i do now (but still smokes by PC) LOL


(edit: hblair... Hofmann Simpeds?!?!? never heard of them ... they old? they usb or analog? how much are they? they look way better than the hotas or CH)
Logged
I don't know what to put here yet.
Pages: 1 ... 3 4 5 [6] 7   Go Up
« previous next »