Kind of directed at Skuzzy, but others can feel free to chime in,
Ok, I did the driver update only because I went from a GeF2 to a GeF4 and needed the newer one to get the most from the card.
My 1st try resulted in some sporadic, fast graphic flashes, similar to the big green triangles others have experienced. Mine were very fast, 1/10th of a second but smaller and not green, but would repeat flash like lightning almost. I noticed some starting from noseart, using external view, and when in the 'Hanger' from the minimized clipboard to the bomb selection area. Some days I would get a lot, and others none at all.
When I did install the new driver I used Det Destroyer, I am running Win98se, and did install the 'Standard Display Adapter(VGA)' when I did it.
However, I noticed in the fine print of the electronic install manual, it actually says to use the 'Standard PCI Graphics Adapter (VGA)'.
I did a reinstall of my video diver and today no flashes at all after 3 or so hours flying. I will keep an eye on it to see if it continues.
My question, would using that 'Standard PCI Graphics Adapter (VGA)' driver have much effect on the install opposed to the 'Standard Display Adapter(VGA)' ??
The driver I installed is the WHQL 30.82s.
Thanks all for your input on my output,
fuzeman