Author Topic: Rudder pedals wobble/bounce (Read 913 times)

Skuzzy · « **Reply #15 on:** April 12, 2003, 10:57:26 PM »

Never used a gameport to USB adapter. Not sure what the software would have to do to make it work. I should think it would just be reconized like normal, but that may not be the case.

If you are not getting any spikes in the calibration, then I am more inclined to lean to damping being needed to be set higher. It could also be interrupts being shared by the sound card/gameport.

Jackal1 · « **Reply #16 on:** April 13, 2003, 04:01:04 AM »

OK. When trying the adapter it is not auto recognized by XP. Damping won`t cut it, I`ve tryed every imaginable setting.
Gameport I/O range =DC70 - DC77 SB Live I/O range DC40 - DC5F IRO 18.
The technical term may be SOL.

As I stated before setting the second controller up in Windows as either CH Flightstick Pro or CH Pedals is the only way I have found to stabilize it`s appearance in setup for Windows and AH. At one time you said to get rid of The CH software. I asked what you suggested setting the second controller up as. I`m still open to any suggestions. I have tryed many combos setting it up as a generic controller with no luck.

Skuzzy · « **Reply #17 on:** April 13, 2003, 07:52:24 AM »

Do not use the CH software to setup any mapping for the stick.

What you do is go into AH's Joystick selection and set each axis/mapping manually.

For example
1) Select the Joystick
2) Select the roll from the left control
3) Select the X-Axis from the right mapping
4) Press "Set Input".

Do the above for each axis/control/joystick.

Jackal1 · « **Reply #18 on:** April 13, 2003, 07:55:14 AM »

My stick is fine Skuzz, it`s the rudder pedals that have the prob.
Once again.....

I`m using USB Saitek X45 stick, no probs there. The rudder pedals are gameport CH Pedals set up as a second controller.

Skuzzy · « **Reply #19 on:** April 13, 2003, 07:34:26 PM »

That was an example. You have to do that for every axis of all the input devices. Have you already done that?

Jackal1 · « **Reply #20 on:** April 13, 2003, 07:41:34 PM »

wrag · « **Reply #21 on:** April 14, 2003, 04:03:28 AM »

I've heard a grip that XP is the problem. That it doesn't handle controllers like previous versions. Also heard any fix has to be done through XP?

One other possible option? Saw a new(?) game card at CH Products some time back. May have been for 98se n such.

Jackal1 · « **Reply #22 on:** April 14, 2003, 11:13:53 AM »

So Skuzz, if not CH, then what do you suggest settig it up as?