Have you had a problem turning up AA and AS and then the buffer is unreable.. here's the fix.
Go into your Display properties and DX settings and crank it ( AS AA ) all up except vericalsynch.
Next you need to download the "Rage 3D Tweaker 3.8 here is the url.
http://www.rage3d.com/r3dtweak/go ahead and install that program. It is a utility giving you acess to everything this fancy card can do.
Next you will need "The Ultimate Raedon Tweaking Guide" a simple pdf file with step by step instructions on how to setup the Rage 3D Tweaker 3.8
here is the url
http://www.innercite.com/~sunking/Ultimate...ing%20Guide.pdfOpen that and give it a read. Follow all the Direct x setting options ( and openl gl if needed).
After you have done that go into display properites once again and make suer your AA and AS settings are not reset to application preference ,rather turned up all the way like you previous did.
next load Aces High and see that buffer clear amd your graphics sharp.
I don't know which, but one of those options the guide tells you to enable cleaned that buffer right up for me. Pefect buffer font and graphics are super sharp at 1600x1200
