Author Topic: SlapShot ... AH II runs like a Champ !!!  (Read 708 times)

Offline SlapShot

  • Plutonium Member
  • *******
  • Posts: 9121
SlapShot ... AH II runs like a Champ !!!
« on: October 15, 2003, 07:31:32 PM »
My specs ... Home-Built Machine

------------------
System Information
------------------
Time of this report: 10/15/2003, 20:01:46
Machine name: SLAPSHOT3G
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 1 (2600.xpsp2.030422-1633)
Language: English (Regional Setting: English)
System Manufacturer: To Be Filled By O.E.M.
System Model: To Be Filled By O.E.M.
BIOS: BIOS Date: 04/22/03 20:43:07 Ver: 08.00.09
Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz (2 CPUs)
Memory: 1022MB RAM
Page File: 254MB used, 2204MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0b (4.09.0000.0902)
DX Setup Parameters: Not found
DxDiag Version: 5.03.0001.0902 32bit Unicode

---------------
Display Devices
---------------
Card name: RADEON 9500
Manufacturer: ATI Technologies Inc.
Chip type: RADEON 9700 AGP (0x4144)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_4144&SUBSYS_00021002&REV_00
Display Memory: 128.0 MB
Current Mode: 1280 x 1024 (32 bit) (100Hz)
Monitor: SONY CPD-G500/G500J
Monitor Max Res: 2048,1536
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.6360 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 6/2/2003 22:41:00, 301568 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: ati2mtag.sys
Mini VDD Date: 6/23/2003 18:56:34, 576512 bytes
Device Identifier: {D7B71EE2-0204-11CF-6A6B-0820A1C2CB35}
Vendor ID: 0x1002
Device ID: 0x4144
SubSys ID: 0x00021002
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel: ModeMPEG2_C ModeMPEG2_D
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run


------------------------
Disk & DVD/CD-ROM Drives
------------------------
Drive: C: (Operating System files only)
 Free Space: 13.0 GB
Total Space: 20.0 GB
File System: NTFS
Model: Promise 2+0 Stripe/RAID0 SCSI Disk Device

Drive: F: (This is where AH II is installed)
Free Space: 201.9 GB
Total Space: 208.9 GB
File System: NTFS
Model: Promise 2+0 Stripe/RAID0 SCSI Disk Device

==============================================

Spit V : FrameRates
-------------------------------

Tower - 45+
Runway - 35+
Just Sky - 148+
General Flight (1/2 ground 1/2 sky) - 30+->50+
Low Alt ground flying - 50s+
Flying with Clipboard - 30s+

Field Gun :
-----------------------------

Shooting at drones (just sky and drones) - 300+
Looking at ground objects on field - 60+->80+

Highest framerate in gun was 383

M-3
-----------------------------

Driving around, I got solid framerates from 40+->100+ ... New tree cover hurts ... LOL


Spit V over the ocean
-----------------------------

Solid 30+->80+ depending upon the objects in view. That too is flying around the CV group.

========================================

I have experience no crashes and/or freezes at all. The visuals are mindblowing. I saw this at the con but on my system it REALLY shines.

It will be interesting to see when the next Beta version shows smoke and explosions ... framerate-wise.

NICE JOB HTC !!!
SlapShot - Blue Knights

Guppy: "The only risk we take is the fight, and since no one really dies, the reward is the fight."

Offline Waffle

  • HTC Staff Member
  • Administrator
  • *****
  • Posts: 4849
      • HiTech Creations Inc. Aces High
SlapShot ... AH II runs like a Champ !!!
« Reply #1 on: October 15, 2003, 07:47:34 PM »
hmmm - I have slower proccesor, and it's an AMD....


How are you even getting FPS over 60 - thought XP had a 60fps loc on refresh. I'm running at 1200x1600 true color (32).
Samsung 955df 19" monitor.

After I deleted the clip.cfg file I've had no problems, CTD's or other wise....just some of the graphics glitches, but no core probs.
My FPS are areound 40-45 level flight, but puling the trigger drops them down to 12...lol :) Good thing I dont use tracers :)


------------------
System Information
------------------
Time of this report: 10/15/2003, 18:38:15
       Machine name: DANSXP2700
   Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 1 (2600.xpsp2.030422-1633)
           Language: English (Regional Setting: English)
System Manufacturer: GBT___
       System Model: AWRDACPI
               BIOS: Award Modular BIOS v6.00PG
          Processor: AMD Athlon(tm) XP 2700+,  MMX,  3DNow, ~2.2GHz
             Memory: 1536MB RAM
          Page File: 131MB used, 1257MB available
        Windows Dir: C:\WINDOWS
    DirectX Version: DirectX 9.0b (4.09.0000.0902)
DX Setup Parameters: Not found
     DxDiag Version: 5.03.0001.0902 32bit Unicode

------------
DxDiag Notes
------------
  DirectX Files Tab: No problems found.
      Display Tab 1: No problems found.
        Sound Tab 1: No problems found.
          Music Tab: No problems found.
          Input Tab: No problems found.
        Network Tab: No problems found.

--------------------
DirectX Debug Levels
--------------------
Direct3D:    0/4 (n/a)
DirectDraw:  0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay:  0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow:  0/6 (retail)

---------------
Display Devices
---------------
        Card name: RADEON 9500 PRO / 9700
     Manufacturer: ATI Technologies Inc.
        Chip type: RADEON 9500 AGP Pro (0x4E45)
         DAC type: Internal DAC(400MHz)
       Device Key: Enum\PCI\VEN_1002&DEV_4E45&SUBSYS_00021002&REV_00
   Display Memory: 128.0 MB
     Current Mode: 1600 x 1200 (32 bit) (85Hz)
          Monitor: Default Monitor
  Monitor Max Res:
      Driver Name: ati2dvag.dll
   Driver Version: 6.14.0010.6387 (English)
      DDI Version: 9 (or higher)
Driver Attributes: Final Retail
 Driver Date/Size: 9/12/2003 22:43:24, 372736 bytes
      WHQL Logo'd: Yes
  WHQL Date Stamp: n/a
              VDD: n/a
         Mini VDD: ati2mtag.sys
    Mini VDD Date: 9/12/2003 22:43:04, 611328 bytes
Device Identifier: {D7B71EE2-0D05-11CF-416B-0820A1C2CB35}
        Vendor ID: 0x1002
        Device ID: 0x4E45
        SubSys ID: 0x00021002
      Revision ID: 0x0000
      Revision ID: 0x0000
      Video Accel:
 Deinterlace Caps: n/a
         Registry: OK
     DDraw Status: Enabled
       D3D Status: Enabled
       AGP Status: Not Available
DDraw Test Result: Not run
 D3D7 Test Result: Not run
 D3D8 Test Result: Not run
 D3D9 Test Result: Not run

-------------
Sound Devices
-------------
            Description: SB Audigy Audio [B000]
 Default Sound Playback: Yes
 Default Voice Playback: Yes
            Hardware ID: PCI\VEN_1102&DEV_0004&SUBSYS_00511102&REV_03
        Manufacturer ID: 1
             Product ID: 100
                   Type: WDM
            Driver Name: ctaud2k.sys
         Driver Version: 5.12.0001.0253 (English)
      Driver Attributes: Final Retail
            WHQL Logo'd: Yes
          Date and Size: 8/12/2002 11:03:30, 837548 bytes
            Other Files:
        Driver Provider: Creative
         HW Accel Level: Full
              Cap Flags: 0xF5F
    Min/Max Sample Rate: 4000, 191999
Static/Strm HW Mix Bufs: 32, 30
 Static/Strm HW 3D Bufs: 32, 30
              HW Memory: 0
       Voice Management: Yes
 EAX(tm) 2.0 Listen/Src: Yes, Yes
   I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
               Registry: OK
      Sound Test Result: Not run
« Last Edit: October 15, 2003, 07:49:59 PM by Waffle »

Offline acepilot2

  • Silver Member
  • ****
  • Posts: 886
SlapShot ... AH II runs like a Champ !!!
« Reply #2 on: October 15, 2003, 07:50:22 PM »
I have a geforce4MX440
P4 2.4ghz
512 megs of RAM

my framerate averages at around 30, not as good as the 70fps i have with the current AH, but it still makes the grade:aok

Offline SlapShot

  • Plutonium Member
  • *******
  • Posts: 9121
SlapShot ... AH II runs like a Champ !!!
« Reply #3 on: October 15, 2003, 08:16:53 PM »
Waffle ...

Direct3D settings are:

SMOOTHVISION II

Anti-Aliasing = 4X

Anisotropic Filtering = 8X

Texture Preference = High Quality

Mipmap Detail Level = High Quality

Wait for Vertical Sync = Always Off

TRUFORM = Application Preference

I also have a SONY Trinitron Multiscan G500 21" set at 100Hz refesh rate.

I think the key is in the refresh rate that my monitor allows and "Wait for VSync" is off.
SlapShot - Blue Knights

Guppy: "The only risk we take is the fight, and since no one really dies, the reward is the fight."