Aces High Bulletin Board
General Forums => Wishlist => Topic started by: StokesAk on October 06, 2010, 07:44:28 PM
-
My wish for this post is a very simple one.
I cannot count how many times someone in my squad has asked what the load out is for our flight or mission.
I wish that HTC could 'coad' a dot command to tell other player what out load out is.
This would be simple in my eyes,
-Open the text channel you would like to put the load out message in. Say squad channel.
-Type the dot command just like any other, .planeload
-The load out would be taken from what you have selected in the hanger and put it into a message that could read.
Fuel:100% Pylon: 2 x 150gal DT GnPCK: #1 (Labeled closest to farthest)
I realize there could be problems with this, any suggestions?
-
Yea your type .loadout......so do the extra 4 letters and say 50% with a drop and the red and blue skin :x
-
My wish for this post is a very simple one.
I cannot count how many times someone in my squad has asked what the load out is for our flight or mission.
I wish that HTC could 'coad' a dot command to tell other player what out load out is.
This would be simple in my eyes,
-Open the text channel you would like to put the load out message in. Say squad channel.
-Type the dot command just like any other, .planeload
-The load out would be taken from what you have selected in the hanger and put it into a message that could read.
Fuel:100% Pylon: 2 x 150gal DT GnPCK: #1 (Labeled closest to farthest)
I realize there could be problems with this, any suggestions?
Wait what loud out did you take? :neener:
-
Yea your type .loadout......so do the extra 4 letters and say 50% with a drop and the red and blue skin :x
. l o a d o u t
1 2 3 4 5 6 7 8
5 0 % D T r e d & b l u e s k i n
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
Hmmm, 17-8 = 4? Think we should offer math courses here. :P
Seems like a good wish though, would be very useful in scenarios. We had Cryptic typing/speaking out the loadout every time someone asked and that was close to 10 times each pre-scenario wait in the Phil. Phandango since we had walk-ons and people not knowing how to view the Squad MOTD. Typing "B24s 50% 500lbers ---##/## by --- skin NE RW" every few minutes gets annoying. :)
-
It wouldn't be a bad idea but imageing the spamming of this message. Someone asks what's the loadout then everyone answers.
-
i dont seem to have a problem with telling loadouts. i type it once when everyone in the flight is ready for the run. simple, wait till you got the attention of everyone...
-
Could be solved with a squad only mission planner...
:noid
-
Try just typing it out once on the squad channel when you're in the hanger?
-
Try just typing it out once on the squad channel when you're in the hanger?
Even if you're just launching in 5 minutes, that text buffer can quickly move that information out of view.
-
Could be solved with a squad only mission planner...
+1 :aok
-
A mission planner that contained a button/check box Mission Type either Public or Squad.
-
Could be solved with a squad only mission planner...
Do people really sit in the tower constantly watching the mission board looking for any mission to join? Just create a mission with enough room for only your guys. Tell them when it's available and all join immediately before anyone else sees it.
Even if you're just launching in 5 minutes, that text buffer can quickly move that information out of view.
Use vox at all? Get everyone on channel 4 (Squad) and get them to shut their yaps for the minute it takes to tell them what to load.
-
Use vox at all? Get everyone on channel 4 (Squad) and get them to shut their yaps for the minute it takes to tell them what to load.
... and then repeat it several times because people missed it. as usual.
squad (or preferably tuned-vox channel) only missions would make this much easier. plus you get waypoints :aok
-
... and then repeat it several times because people missed it. as usual.
squad (or preferably tuned-vox channel) only missions would make this much easier. plus you get waypoints :aok
tell them the waypoints for your squad flights then... i have no problem with telling Flight Leads or lead members where to go and when to go there. and i myself know the mission so my flight just follows me. You get good commanding types in your crew and it runs very smoothly...
ImADot, there ARE actually some people that look at the mission planner. theyre called noobs, and they jump in missions on the planner the second its up sometimes.
-
by that logic we should get rid of the mission planner completely. I mean we can always use range/tuned vox and country text to set up a country mission right? while we're at it lets dump vox as well, as its just an "easymode" substitute for people who are too lazy to type. :rolleyes:
-
by that logic we should get rid of the mission planner completely. I mean we can always use range/tuned vox and country text to set up a country mission right? while we're at it lets dump vox as well, as its just an "easymode" substitute for people who are too lazy to type. :rolleyes:
nice sarcasm holmes, you didnt get my point did ya?
-
I'd rather have the ability to used the up/down arrows to scroll through the last 4 or 5 things I typed into the text bar...especially for the squad channel.
-
It may seem like a small thing, but wanting to have the same skin is another reason to not want to use the mission planner. Yes, I suppose you could just put up a mission so you can see the load out and field, and just not launch it, but you still risk getting some people just jump along.
If we plan a mission, it's not a matter of everyone talking, it's that we may launch in 15 minutes and certain people are either; engaged in a fight, afk, not even on yet, talking to other squads, etc.
We make it work with vox and text, but a squad mission planner would streamline and simplify the process without giving the squad any unfair advantage.
-
I'd rather have the ability to used the up/down arrows to scroll through the last 4 or 5 things I typed into the text bar...especially for the squad channel.
:aok
as long as theres flood prevention for spam dorks..
make it mute em if they repeat themselves more than 2 times in a minute ;)
-
make it mute em if they repeat themselves more than 2 times in a minute ;)
What do you mean?
-
make it mute em if they repeat themselves more than 2 times in a minute ;)
Wut do U meen?
-
make it mute em if they repeat themselves more than 2 times in a minute ;)
What R U talking about?
-
nice sarcasm holmes, you didnt get my point did ya?
I got it well enuf to refute it using reductio ad absurdum. not sarcasm, but some people call it the lowest form of debate :)
-
I got it well enuf to refute it using reductio ad absurdum. not sarcasm, but some people call it the lowest form of debate :)
:aok :lol
-
What R U talking about?
yea but you didn't use up-arrow to re-type your last entry in the text buffer in game..
-
What do you mean?
Wut do U meen?
What R U talking about?
Would have been easier to use the exact same words with the ability to cache the last few things you typed and use the up/down arrows to bring them up. :neener:
:aok
as long as theres flood prevention for spam dorks..
make it mute em if they repeat themselves more than 2 times in a minute ;)
I agree, although I have some squadmates that haven't quite figured out the nuances of answering verbal inquiries with red text...so for squad channel I would want the ability to "get their attention".
-
I agree, although I have some squadmates that haven't quite figured out the nuances of answering verbal inquiries with red text...so for squad channel I would want the ability to "get their attention".
OMG
What fun we could have with blinky text! :D
-
+1 would be nice though msn VOX does make it pretty simple right now.
I also like the idea for a squad only planner. Now if only there were enough squaddies on to do a mission of any kind... :(
My piggyback request would be to modify the planner's loadout and aircraft. So many times the planning is awful and you would just love to tweak it. You're left with one of two options. Don't play or join the 10 other guys asking for changes. I think this delays/scraps a lot of mission. Sure, let the planner do his thing, but let me change that 190A8 to a F6F if I want. A few options would do wonders for the number of organized missions out there. If I'm stuck at an options screen when the mission rolls give me a popup with a 20 sec timer to: A. Drop from the mission B. Finish my loadout and roll C. Roll with the msn planner's aircraft and loadout. If the timer expires, it defaults to option C.
Another idea: Let the mission planner make "Flights" instead of just throwing out aircraft types and loadouts. Let me make a flight of mixed IL-2s and F6Fs and label it "CAS flight" and another flight made up of P-38s and P-51s and label it "kickbutt top cover".
One last thing: VOX is great, but sometimes a picture is worth a thousand words. Since the mission planner is usually the mission commander, give him a basic draw tool on his clip board. Something basic like the little routing tool for task groups. This will enable pretty precise stuff if used properly instead of "fly straight there en masse and hit the VH first". Msn members that open their own clip board will have all their normal clipboard controls but be able to see what the Msn Commander is drawing. No this is not realistic, but it is a good gameplay concession IMO since nobody wants to sit in a msn planning brief on the ground for 30 min like they would in RL.
:salute
-
Hmmm.....
Say, like everytime you start a dot command, ".(after dot is entered the text last entered pops up)" So that, {dot enter} = the last text you put in text buffer.
Then if you type any valid dot command after the dot, ".sr{spacebar}( the text disappears){enter} and the correct dot command is executed.
This would also, be useful for avoiding having to re type text sent over incorrect channel. For instance I type text on squad or country channel that I meant to put out on 200.... "<S> Letalis nice job!" I see my error pops up on squad text and just open 200 channel and hit dot enter, and Letalis receives his compliment.
Now, even cooler would be if I could edit .(last text that I typed in buffer) by placing my cursor in correct area. Then, I could make small corrections to a lengthy text, like changing fuel to 75 instead of 50 or .<S> Letalis nice job, I was up for 4 hrs, and had to call my Dr. :D
-
:aok :rofl :bolt: