Aces High Bulletin Board
General Forums => The O' Club => Topic started by: Tupac on May 29, 2011, 07:38:20 PM
-
Or is there?
http://www.wgal.com/r/28028502/detail.html
-
:rofl Now thats amazing!
-
facepalm anyone?
btw thats pretty nice lol
-
facepalm anyone?
btw thats pretty nice lol
(http://images.sodahead.com/profiles/0/0/1/9/6/4/0/8/7/epic-face-palm-18693937099.jpeg)
-
Kinda like Agent Gibbs on NCIS?
-
Kinda like Agent Gibbs on NCIS?
After Gibbs builds it he takes it apart though
-
Now that this project is complete, Reeves hinted he may start on another plane in his basement.
At least now... he's got a way to get the plane out...
-
After Gibbs builds it he takes it apart though
Not always! One of the boats he built, the one he named Kelly, appeared in an episode where it was found floating with some dead baddies in it. Gibbs had given the boat to his old partner's (Mike Franks) grand daughter, or something.
-
I saw that last week and thought about posting it, but....
...the answer is he's going to knock down part of a basement wall and get it out and then reconstruct the wall.
Not exactly "planning ahead" but if you have the extra shekels to buy the RV7 kit--then you have the shekels to drop the basement wall and then put it back up again.
Who said all rich people were necessarily "smart".
-
Gibbs built three boats in his basement, one from every wife.
-
I probably would've built a shed in the backyard to construct the plane, perhaps with plumbing and AC, I think he's going to need it for a while ;)
-
Who said all rich people were necessarily "smart".
Buying and building an RV kit is absolutely not a standard of being "rich."
-
Buying and building an RV kit is absolutely not a standard of being "rich."
So, how cheap are they running nowadays?
-
So, how cheap are they running nowadays?
You can build an RV7 for around 70k completed
-
You can build an RV7 for around 70k completed
Pocket change...
-
Pocket change...
It becomes alot more feasible if you spread the cost out over 7-12 years like most builders do.
-
It becomes alot more feasible if you spread the cost out over 7-12 years like most builders do.
I can see that. Instead of getting a six-pack on the weekend, get a bucket of rivets...
-
I can buy an airplane for less than a new bone stock Corvette, Camaro or Mustang. It's all about what your hobby is and what your passions are. Some guys spend money remodeling their houses, restoring their cars, paying for their ex wives and throwing money at a hole in the water disguised as a boat. Heck you can get a single seat aerobatic airplane for less than the cost of a new motorcycle and guys with a bike are hardly the stereotype of "rich."
Blue collar Joe's can buy or build an airplane if that's what they're after. Experimental and homebuilt single engine airplanes can be good examples of more affordable options. The guy lives in a modest house and had his pet project that lasted a few years. Hardly a member of the Forbes 400.
-
Hardly a member of the Forbes 400.
Neither am I :D
But I am going to assemble my parts, when finished making them, in a hanger
http://www.mykitlog.com/VonMessa (http://www.mykitlog.com/VonMessa)
Haven't updated the log online in a while.
-
hhmmm...in pa, and no response from vonmessa,,,,,,,,,,,,hhmmmmmmm.... :noid :airplane:
-
I didn't realize you were so close by (looking at your location apparently wasn't that obvious).
I'm in West Chester and keep our airplane at Coatesville. That's a nifty bit of kit (plans) you might say in the Queen's.
-
Didn't know there were so many NCIS watchers here. Love the show.
-
You can build an RV7 for around 70k completed
Yea, $70K is probably a pretty close average, BUT... If you're frugal you can do it for a lot less then that even, I know of one completed last year for around $45K.
He did a simple VFR panel, got a high time used Lycoming and overhauled it himself, fixed pitch prop, did his own paint, and kept away from all the spendy options like custom seats, fancy throttle quadrants, electric flaps, and autopilot. Now he's got his own airplane for less $$ then a new SUV or ski boat. And as a plus, he can still add some of those fancy options later if he wants as his finances allow.
Of course on the opposite end of the spectrum I've seen pics of an RV-7 with dual Garmin G900s, custom leather interior, $50k paint job, composite CS prop. This guy literally had more $$ into his panel then many have in their whole plane.
That's the beauty of the experimental category... ... it can be as simple or fancy as you like.
EDIT: also I don't get why people are ragging on this guy for building in his basement. I for one admire his dedication. He didn't let any excuse like "I don't have a shop yet" get in the way of pursuing his dream. He thought outside the box and got it done.
-
I didn't realize you were so close by (looking at your location apparently wasn't that obvious).
I'm in West Chester and keep our airplane at Coatesville. That's a nifty bit of kit (plans) you might say in the Queen's.
Didn't know you were so close, either :aok
Yea, $70K is probably a pretty close average, BUT... If you're frugal you can do it for a lot less then that even, I know of one completed last year for around $45K.
He did a simple VFR panel, got a high time used Lycoming and overhauled it himself, fixed pitch prop, did his own paint, and kept away from all the spendy options like custom seats, fancy throttle quadrants, electric flaps, and autopilot. Now he's got his own airplane for less $$ then a new SUV or ski boat. And as a plus, he can still add some of those fancy options later if he wants as his finances allow.
Of course on the opposite end of the spectrum I've seen pics of an RV-7 with dual Garmin G900s, custom leather interior, $50k paint job, composite CS prop. This guy literally had more $$ into his panel then many have in their whole plane.
That's the beauty of the experimental category... ... it can be as simple or fancy as you like.
EDIT: also I don't get why people are ragging on this guy for building in his basement. I for one admire his dedication. He didn't let any excuse like "I don't have a shop yet" get in the way of pursuing his dream. He thought outside the box and got it done.
You wouldn't believe the reaction from my friends when they come over.
Most folks do not understand.
Them "You are building an airplane? In your basement? How are you going to get it out?"
Me "No, I am fabricating parts for my plane in my basement and when all the parts are done, I will assemble it in a hanger."
Them "Huh? How do you fit the parts in the door when they are delivered?"
Me "I am building a plane from a blueprint and a pile of raw materials, not assembling a kit."
Them "Huh?"
Me "I'm just attaching wings to the house and I'm gonna fly that so I don't need a hotel when I travel" :lol
Having the shop as close as possible is the #1 rule. It makes it harder to give in to the "I don't have time to drive to the shop" excuse.