Aces High Bulletin Board

General Forums => The O' Club => Topic started by: pipz on February 13, 2017, 04:48:07 PM

Title: 1/48 scale 190a-5
Post by: pipz on February 13, 2017, 04:48:07 PM

Horrido baby!

(http://i191.photobucket.com/albums/z207/Pimpzdog/DSCN0401_zpsiunxdmmg.jpg) (http://s191.photobucket.com/user/Pimpzdog/media/DSCN0401_zpsiunxdmmg.jpg.html)

(http://i191.photobucket.com/albums/z207/Pimpzdog/DSCN0402_zpstexyhdqp.jpg) (http://s191.photobucket.com/user/Pimpzdog/media/DSCN0402_zpstexyhdqp.jpg.html)

(http://i191.photobucket.com/albums/z207/Pimpzdog/DSCN0403_zpsjhmi5cix.jpg) (http://s191.photobucket.com/user/Pimpzdog/media/DSCN0403_zpsjhmi5cix.jpg.html)

Title: Re: 1/48 scale 190a-5
Post by: guncrasher on February 13, 2017, 04:54:55 PM

again in the wrong forum pipz :).  dont make me go there and revoke your spanish license.



semp

Title: Re: 1/48 scale 190a-5
Post by: Ron on February 13, 2017, 05:55:56 PM

Superb job  :aok :aok :aok :aok :aok

Title: Re: 1/48 scale 190a-5
Post by: Kanth on February 13, 2017, 05:57:19 PM

very nice!!!  :aok

Title: Re: 1/48 scale 190a-5
Post by: horble on February 13, 2017, 06:08:16 PM

Oh that's a beaut.

Title: Re: 1/48 scale 190a-5
Post by: Nefarious on February 13, 2017, 06:10:24 PM

Looking good!

Title: Re: 1/48 scale 190a-5
Post by: JOACH1M on February 13, 2017, 06:42:49 PM

 :aok

Title: Re: 1/48 scale 190a-5
Post by: Devil 505 on February 13, 2017, 06:48:13 PM

Nice!

Title: Re: 1/48 scale 190a-5
Post by: Puma44 on February 13, 2017, 08:23:48 PM

 :aok

Title: Re: 1/48 scale 190a-5
Post by: JimmyD3 on February 13, 2017, 08:38:20 PM

Very well done Pipz! :cheers:

Title: Re: 1/48 scale 190a-5
Post by: BBQsam on February 13, 2017, 10:07:10 PM

Its an RC plane right? 
(well it should be)

Why are the trims red?

Title: Re: 1/48 scale 190a-5
Post by: hgtonyvi on February 13, 2017, 10:20:04 PM

 :aok

Title: Re: 1/48 scale 190a-5
Post by: bozon on February 14, 2017, 01:16:19 AM

Excellent bro!
But how will you fit in?  :O

Title: Re: 1/48 scale 190a-5
Post by: Copprhed on February 14, 2017, 11:29:26 AM

So now that it's finished you'll fill it with fireworks, set them off and post the video?

Title: Re: 1/48 scale 190a-5
Post by: FLOOB on February 14, 2017, 01:41:42 PM

I'll withhold my kudos until I see what it looks like after its first test flight.

Title: Re: 1/48 scale 190a-5
Post by: lunatic1 on February 14, 2017, 03:16:57 PM

you forgot the bullet holes

Title: Re: 1/48 scale 190a-5
Post by: lunatic1 on February 14, 2017, 03:18:10 PM

Dragun built a scale model of a 190-A8 and a RC one as well

Title: Re: 1/48 scale 190a-5
Post by: Serenity on February 14, 2017, 04:33:56 PM

It looks so good, it makes me wanna jump in AH and fly an Fw-190! (Which I NEVER do. Messerschmitt uber alles!)

Title: Re: 1/48 scale 190a-5
Post by: Nilsen on February 15, 2017, 01:19:45 AM

 :aok :aok :aok

Title: Re: 1/48 scale 190a-5
Post by: WEZEL on February 15, 2017, 08:20:38 AM

I see a moose print on the under side of the left wing..........other than that great work.

Title: Re: 1/48 scale 190a-5
Post by: DREDIOCK on February 17, 2017, 08:10:52 PM

sweet!

Title: Re: 1/48 scale 190a-5
Post by: save on February 18, 2017, 02:24:07 PM

Good work, Pipz !
Squad war cry have always been 'Lube and Shame', you can now guess how he squeeze himself into that tiny 190  :D

Quote from: bozon on February 14, 2017, 01:16:19 AM

Excellent bro!
But how will you fit in?  :O

Title: Re: 1/48 scale 190a-5
Post by: pipz on February 18, 2017, 05:56:23 PM

Quote from: save on February 18, 2017, 02:24:07 PM

Good work, Pipz !
Squad war cry have always been 'Lube and Shame', you can now guess how he squeeze himself into that tiny 190  :D

 

 :rofl  :aok  :cheers:

Thanks fellaz!  :airplane:

Title: Re: 1/48 scale 190a-5
Post by: Rino on February 25, 2017, 03:48:01 PM

     Heya Pipz,
     As I have gotten older and my eyes slow get worse, I have switched to
diecast.  Mostly Hobby Master as their detail is excellent.  About 10 years
ago I picked up this one mostly because it had the same Euro One paintjob
as the 347th TFW I was in. 

     I was shocked to discover that they no longer manufacture it.  The E model
was the most produced variant made.  So naturally there are tons of Japanese
EJs and Israeli and Turk variants made. Naturally they are still in stock because
very few people want Turk F4s.

     It just drives me nuts that this bird was very rare even when they did make it.
Oh well, at least I got one before they went the way of the Loch Ness monster :)

http://www.hobbymastercollector.com/HA1922.html (http://www.hobbymastercollector.com/HA1922.html)

(http://www.hobbymastercollector.com/files/HA1922-1FP.jpg)

     Oops, sorry about the size of the picture, I didn't notice until after
posting, and I'm too lazy to resize it.   :neener:

Title: Re: 1/48 scale 190a-5
Post by: pipz on February 25, 2017, 09:36:37 PM

That looks cool! I have looked at die cast stuff and Hobby Master seems to be one of the manufactures that are on top. Excellent choice!  :cheers:

Title: Re: 1/48 scale 190a-5
Post by: Guppy35 on February 25, 2017, 10:51:00 PM

Quote from: Rino on February 25, 2017, 03:48:01 PM

     Heya Pipz,
     As I have gotten older and my eyes slow get worse, I have switched to
diecast.  Mostly Hobby Master as their detail is excellent.  About 10 years
ago I picked up this one mostly because it had the same Euro One paintjob
as the 347th TFW I was in. 

     I was shocked to discover that they no longer manufacture it.  The E model
was the most produced variant made.  So naturally there are tons of Japanese
EJs and Israeli and Turk variants made. Naturally they are still in stock because
very few people want Turk F4s.

     It just drives me nuts that this bird was very rare even when they did make it.
Oh well, at least I got one before they went the way of the Loch Ness monster :)

http://www.hobbymastercollector.com/HA1922.html (http://www.hobbymastercollector.com/HA1922.html)

(http://www.hobbymastercollector.com/files/HA1922-1FP.jpg)

     Oops, sorry about the size of the picture, I didn't notice until after
posting, and I'm too lazy to resize it.   :neener:

I count five Hobby Master USAF F4Es out there besides yours Glenn.  Two sand and spinach, one Euro 1, 1 Egypt 1 and 1 ADC Gray.  All look really nice.  All kinds of F4C and D now from Hobby Master in USAF markings.  Keep the faith :)

Title: Re: 1/48 scale 190a-5
Post by: Rino on February 28, 2017, 06:59:43 PM

     Weird, the only other one I've spotted was the grey bird from the 57th
FIS in Iceland.  Maybe I should try harder.  We did have spinach paint jobs
when I first arrived so that would be copacetic :)

Title: Re: 1/48 scale 190a-5
Post by: hotcoffe on March 03, 2017, 06:46:06 AM

coollll wtg  :airplane: :airplane: :airplane:

Title: Re: 1/48 scale 190a-5
Post by: caldera on March 03, 2017, 10:13:36 AM

Really missing the 1/48 scale planes from the old days, especially the B-24 and B-29.  Never could paint worth a damn and always managed to get that Testor's glue all over the canopy.  :bhead

Title: Re: 1/48 scale 190a-5
Post by: TheBug on March 03, 2017, 11:34:49 AM

Quote from: caldera on March 03, 2017, 10:13:36 AM

... always managed to get that Testor's glue all over the canopy.  :bhead

That's why you use white glue.   :old:

Title: Re: 1/48 scale 190a-5
Post by: Drano on March 03, 2017, 11:49:33 AM

Or another product made for the purpose called Micro Krystal Klear. You can even make small windows out of it.


Sent from my iPad using Tapatalk

Title: Re: 1/48 scale 190a-5
Post by: pipz on March 03, 2017, 04:45:47 PM

Quote from: TheBug on March 03, 2017, 11:34:49 AM

That's why you use white glue.   :old:

I use Future floor polish for that. Works great. Makes the canopy look shiny and the plastic cement wont fog it up. I found that white glue didn't hold for long.



Thanks Fellaz!  :cheers:

Title: Re: 1/48 scale 190a-5
Post by: zack1234 on March 04, 2017, 01:23:58 AM

 :)