Aces High Bulletin Board
Help and Support Forums => All things VR => Topic started by: Randy1 on October 25, 2025, 01:30:16 PM
-
I found an older post that was very helpful on the crystal light in AH. My G2 died.
Is crystal light from pimax still aa good choice for AH? Lot of bad press from about a year ago.
I do Iracing and AH.
-
I use a crystal light now and love it...thanks to SNO who told me about it..
Started with a HTC vive pro original and use a quest 2 when we are remote at the in-laws ...
The crystal light blows them both away in clarity resolution and comfort
Be sure to get the audio upgrade as the default ear pieces aren't good at all..
Eagler
-
I found an older post that was very helpful on the crystal light in AH. My G2 died.
Is crystal light from pimax still aa good choice for AH? Lot of bad press from about a year ago.
I do Iracing and AH.
I went from the G2 to the Pimax OG Crystal (same optical engine as the Crystal light only with eye-tracking) a couple years ago and flew some sessions in AH with it. Comparing the two I found the Crystal to be clearer, has a bigger sweet spot, less glare, and better contrast (night actually looks like night and not just a gray/black). It is really the cheapest upgrade/replacement to the G2.
I think the Pimax takes a little more tweaking than the G2 to get the most from it, but it is a very nice improvement.
Over the last year Pimax has done A LOT to improve customer service and quality control. I have several friends that also went to the Crystal from the G2 and everyone of them felt it was worth it.
I would also suggest getting the free Mbucchia quadviews addon. Even though the Light and G2 do not have eye tracking, the quadviews gives you the highest resolution in the sweet spot and down grades the resolution in your peripheral. The end result is no noticeable degradation of clarity, but a boost in computer VR performance of 20% to 40%.
Hope this helps.
-
I'm running the crystal super and love it. I don't know about the light but the super took a bit of settings tweaking to get it running smoothly, but there's lots of videos out there on what to set.
I would say the tracking is not as good as the g2. With my G2 I would set my head position when I logged on and never have to reset it. I have to reset about once every half hour with my super. Not a deal breaker by any means for me.
I'm not using the mbucchia quadviews, just the pimax version. Seems to work well but I have a pretty high end machine. I'll have to check it out.
-
Thank you all for the replies. Reading reviews in iracing match your reviews in AH.
The Quest 3 is very good from what I have read and heard from my teammate mustng2. Quest 3 is probably the most used VR in simulation games. The Crystal Light just offers the next level up which is better in iracing.
I was waiting on the BSB2 but the facial heat was a bit too much to overcome in my opinion based on other reviews. With a base station added on the price is just a bit much.
I think the new Samsung has small fans built if I remember right.
-
Well, now you guys have done it! I’m about to pull the trigger on a Crystal Light. Researching this afternoon, discovered Pimax will offer a $100 digital trade in on my G2 by sending a picture of the S/N (they don’t want the G2 sent to them). Need to get more up to speed on the extras that are considered a must have.
What is the “ Mbucchia quadviews addon” about?
:salute
-
A good review here. The second review is more aligned with to iracing but still a good review.
https://www.youtube.com/watch?v=sLWOqVNPMoY (https://www.youtube.com/watch?v=sLWOqVNPMoY)
https://www.youtube.com/watch?v=JIP0DNtv2XE&t=2050s (https://www.youtube.com/watch?v=JIP0DNtv2XE&t=2050s)
-
Well, now you guys have done it! I’m about to pull the trigger on a Crystal Light. Researching this afternoon, discovered Pimax will offer a $100 digital trade in on my G2 by sending a picture of the S/N (they don’t want the G2 sent to them). Need to get more up to speed on the extras that are considered a must have.
What is the “ Mbucchia quadviews addon” about?
:salute
Quadviews is a way to give you more performance in VR. Your eyes have a relatively small focus area compared to your entire field of view. So in VR why spend computing resources making the entire field of view clear when your eyes are only using a small part of it? Quadviews makes your video card devote its resources to the area of focus and the peripheral field of view is rendered at a lower resolution.
For instance, my quadviews sets my focus resolution to 200% while the rest of the field of view is rendered at 20% resolution.
When tuned correctly, quadviews will give you 30%-40% more performance with an increase in visual clarity.
This also works for VR headsets without eye-tracking such as the G2 or Crystal Light. The "sweet spot" is rendered at high resolution and peripheral at a lower amount.
Pimax has a quadviews setting, but it is still a work in progress and does not provide as much performance benefit as Mbucchias.
Here is a link to explain further:
https://github.com/mbucchia/Quad-Views-Foveated/wiki
Hope this helps.
-
I wonder, would software be able to adjust for the need of corrective lens in VR?
-
I wonder, would software be able to adjust for the need of corrective lens in VR?
You buy those separately using your current eye glass prescription on most VRs. Check the VR before you buy. It attaches to the VR lense so it can be updated if your prescription changes. Some VRs have enough room to be able to wear some glass frames but not all.
I recently had cataract surgery on one eye which gave me near 20-20 vision in that eye. I took out that attached prescription lenes for that one eye.
BTW if you have a low-moderate PC you might be better off with a quest 3.
-
I wonder, would software be able to adjust for the need of corrective lens in VR?
I think that would be awesome!
I get my eyes checked each year and sometimes there is enough change that I need new lens. Im not going to get the inserts everytime I get my eyes checked. If I could tweak the software to adjust the screens to my eye site would be great.
-
As was suggested to me, I got this to help with my eyeglasses:
Pimax Crystal Apache Comfort Strap + Foam Upgrade kit COMBO Crystal Foam Pad Options: 2x Sets PU Leather (4xpads)
https://www.studioformcreative.com/pimax
Eagler
-
Quadviews is a way to give you more performance in VR. Your eyes have a relatively small focus area compared to your entire field of view. So in VR why spend computing resources making the entire field of view clear when your eyes are only using a small part of it? Quadviews makes your video card devote its resources to the area of focus and the peripheral field of view is rendered at a lower resolution.
For instance, my quadviews sets my focus resolution to 200% while the rest of the field of view is rendered at 20% resolution.
When tuned correctly, quadviews will give you 30%-40% more performance with an increase in visual clarity.
This also works for VR headsets without eye-tracking such as the G2 or Crystal Light. The "sweet spot" is rendered at high resolution and peripheral at a lower amount.
Pimax has a quadviews setting, but it is still a work in progress and does not provide as much performance benefit as Mbucchias.
Here is a link to explain further:
https://github.com/mbucchia/Quad-Views-Foveated/wiki
Hope this helps.
Thanks TShark! Very informative explanation. :aok
-
just a warning...
My crystal light did not like the upgrade Pimax pushed through a couple of days ago...
I put it of until just now and now the headset will not come up..
Pimax chat support old me to try back after 8pm est as the place will be open then...but that it was a common problem and they will need to send new firmware with flashing instructions.. not sure how long that will be..
1st experience with their tech support and it isn't impressive..
Eagler
-
Eagle are you using steamVR? Try different setting in the pimax software for openXR and the like. May not help.
I looked on the iracing forum for problems with the latest Pimax update. I found no post of any problems.
-
Support said they are getting calls about it..
My issue has been resolved this morning :aok
Last night I used the laptop and quest2 and had a very enjoyable vr ah experience :joystick:
Eagler
-
Eagler when using the Crystal light in passthrough can you see the keyboard key letters? Can you ssee around the nose piece to type?
-
Howdy Randy1
I cannot make out the keys in pass-through mode..
If you lift the headset up a bit you can see around the nose piece..
I have everything I need programmed into the hotas and use the vr keyboard to hunt and peck anything on 200..
Eagler
-
Thank you Eagler.
-
Use code EmailCrystal for $200 off pimax headsets until July 16th..
https://pimax.com/products/pimax-crystal-super?bg_ref=7Pmtg2vzUg&utm_source=Pimax+Newsletter&utm_medium=email&utm_campaign=ac8ee01f5b-How+Good+of+a+PC+Do+I+Need+to+Run+DCS+in+VR_COPY_0&utm_term=0_-1bf68ce23d-%5BLIST_EMAIL_ID%5D&ct=t%28How+Good+of+a+PC+Do+I+Need+to+Run+DCS+in+VR_COPY_0%29&mc_cid=ac8ee01f5b&mc_eid=de5f6cfd03
Eagler
-
I'm late to the party but regarding the G2, Microsoft broke it when they discontinued Windows Mixed Reality. There is a third party workaround however. Brother has a Pimax and G2. I got the G2 working on his spare machine via the third party workaround.
https://store.steampowered.com/app/3824490/Oasis_Driver_for_Windows_Mixed_Reality/
-
Do you have to run steam to run AH in VR? I would prefer not to install steam as I also play MSFS 2024 and it runs better without Steam installed. Without steam I cannot get AH to switch to VR mode.
-
Do you have to run steam to run AH in VR? I would prefer not to install steam as I also play MSFS 2024 and it runs better without Steam installed. Without steam I cannot get AH to switch to VR mode.
No, the stand alone game runs it fine as long as you run the DX11 version which comes as the default start file.
-
How does the pricing work on the Pimax site? I see that the Light is "599-899" and the Super is "799-1,599" but when I click in, it's just 899 (Light) and 1,599 (Super, $200 off). I assume the cheaper pricing is just from days past but they still list it like that for some reason?
-
Pimax prices are whatever they are on their sites .. they bounce around with specials and bundles all the time..
Got this in an email this morning..
Congratulations! You're now eligible for the special rewards, including:
Crystal Light: An $80 discount.
Crystal Super QLED Option A: $80 discount.
Crystal Super QLED Option B: The exclusive benefit of free prescription lenses (worth $159) & DMAS earphones (worth $99).
Thanks again for being part of the VR community and for taking the next step toward a clearer, more immersive experience.
Next Steps to Redeem Your Discount:
Visit the Pimax Store and add Crystal Light or Crystal Super QLED (50PPD / 57PPD / Ultrawide)to your cart.
At checkout, enter your exclusive discount code or simply click the button below.
Crystal Light $80 discount: BZSJFL-BSD
Crystal Super QLED $80 discount: PCVR10
Crystal Super QLED DMAS & Lens: SUPER_UPGRADE..
Eagler
-
Interesting, thank you. I'd probably be looking at the Light, I just don't use VR nearly enough to justify the Super's cost.
I got a Pimax gift card so looking to maybe upgrade. Coming from a Quest 2, there are a few major differences aside from specs. I see the way the Pimax is I won't be able to wear a headset over top of it, so will have to use the built-in headphones/mic most likely. I also see the Pimax is required to be plugged in with DP which makes sense considering the resolution. I enjoy the Quest 2's ability to use AirLink and be totally wireless, but I don't think it's a deal breaker and probably just get used to it.
I also realize I'll have to get a newer video card. Bummer. :)
-
I started vr in 2018 with the original vive pro and a 1080 card..
It got me hooked...
I have both the quest 2 and Crystal Light..the light is a good upgrade from the quest 2 ..
The better the graphics card the better the headset will perform regardless of the combo imho.IMHO..
Are you looking for just the headset or would you need controllers too..
Eagler
-
Oh damn, it doesn't come with controllers? I guess I really don't need them. I assume if it doesn't come with them, they aren't required like the Quest needs them. I'd only be using it for AH, IL2, and probably some racing.
My 1080ti still rocks everything I play even in VR, but the Pimax would be more demanding so I'd probably be looking to upgrade to a 5070ti or 40-series.
I stopped using the Quest 2 in IL2 because I couldn't ID a thing until it was on my 6 shooting at me. I'll be curious how much better the Pimax would be, I know the resolution and clarity are much better on paper. VR in AH is a bit more forgiving due to icons.
-
Spikes keep in mind a GPU upgrade may lead to other shortfalls in in the rest of your PC hardware.
Often the pimax is compared to a quest 3 in you tube reviews as an example assuming you have the hardware to drive each VR to it's full potential. If you have to lower the setting on your VR of choice to get it to run on your PC then you may have overspent on the VR. Some of the AH maps can be very demanding on PC hardware.
I suggest you look at VR selection and PC upgrade as one project then find the right balance to fit your budget.
Like Eagler posted, if you owned a 1080ti, you were king of of the VR-PC world. Now, that is not even an entry level in upgraded VR. VR hardware is certainly part of the blame but game designers have let pretty, overtake practically of the program. As consumers though we made that happen as we were suck in to pretty is better.
Best I can tell is maybe the worst offender is trees in AH, and ground clutter.
-
I have an i7-12700K and 64GB of ram so at this point my video card is the oldest thing in my tower. The CPU would technically be a bottleneck at that point if I jumped to say a 5070ti, but I don't believe it would have a huge effect. I have an i7-14700 I can throw in if needed.
-
I run my crystal light with a 12900k and a 12gb 3080 at 120hz, I have shadows and reflections off as they do hit the frame rates down to 70 fps at times. I only play AH so no clue about other games. I don’t use Steam I have the game on my HD but I have to run steamvr not through steam itself but “steamvr” for the game to work.
-
I have yet to try Pimax Play Foveated rendering in AH. Hope to try it today.
-
Installed the Crystal Light DMAS earphone upgrade today.
The standard earphones that came with the CL are surprisingly good. Not as loud sounding as the G2 but did not have that kind of a harsh sound as the G2. These would be a good choice if you needed to be listing for things outside the game sound. Not quite loud enough though to hear a distant tank. Approaching closer tanks were no problem.
Now I have the DMAS upgraded earphones from Pimax I installed today. When I took them out of the box, I was surprised they were heavier than I expected. Very solid feeling. They came with a small screwdriver which worked on the right side but would not budge the left side. Went to a bigger screwdriver. With a bit of careful twisting the screw came out without issue. The DMAS rotate a bit which was another surprise.
Off to AH for a sound test. Started with an M4. Surprised again. The DMAS upgrade had a much better dynamic range than I expected. They were notably louder than the stock CL earphones. A large step up from the G2 sound without question. The off-ear sound was powerful when firing weapons. Oddly though the P38 engine sound was still bland as always. Typhon canon firing was amazing.
-
I upgraded to dmas and think it's better sound...
Coming from a vive pro with great over the ear sound I wasn't impressed with the speakers that came with the unit..
But it's weird strong arm marketing imo as the better speakers should be standard for the price of the headsets...
Eagler
-
The DMAS are added in as part of the current CL sale.
-
Are any of you running the CL on a 3080, I7, 16G RAM, W10 rig? Thats my current rig. Starting to get the itch for a CL. Also interested comparison from those of you who’ve come from the G2 to the CL. Thanks in advance! :salute
-
Puma the CL does have ways of turning it down so it is less demanding on the PC hardware. Your card is above minimum for sure and sits in the recommended section but I do think you have to tone it down a bit. See the link below. I have a 4080 with an i7 14700 OC.
https://pimax.com/blogs/crystal-light-tutorials/pc-requirements-for-the-pimax-crystal-light?utm_source=googlePMX&utm_medium=DA-1-CPYY&utm_campaign=23882887852&utm_content=&ot_source=google&ot_medium=paidads&ot_cam=23882887852&ot_grp=&ot_ad=&gad_source=1&gad_campaignid=23882893822&gclid=CjwKCAjwpefSBhBvEiwAzyEtZ2hoFveyxHnQnC8gAy15Cx0cUuP7s8clvvn4QkSzIg0_PcufegD0HxoCN6gQAvD_BwE (https://pimax.com/blogs/crystal-light-tutorials/pc-requirements-for-the-pimax-crystal-light?utm_source=googlePMX&utm_medium=DA-1-CPYY&utm_campaign=23882887852&utm_content=&ot_source=google&ot_medium=paidads&ot_cam=23882887852&ot_grp=&ot_ad=&gad_source=1&gad_campaignid=23882893822&gclid=CjwKCAjwpefSBhBvEiwAzyEtZ2hoFveyxHnQnC8gAy15Cx0cUuP7s8clvvn4QkSzIg0_PcufegD0HxoCN6gQAvD_BwE)
You might consider a Quest 3 as well. The Q3 and CL are a real toss up when considering all things. Figure in a hard connection with the Q3 if you want to play beyond the normal battery life.
-
Puma the CL does have ways of turning it down so it is less demanding on the PC hardware. Your card is above minimum for sure and sits in the recommended section but I do think you have to tone it down a bit. See the link below. I have a 4080 with an i7 14700 OC.
https://pimax.com/blogs/crystal-light-tutorials/pc-requirements-for-the-pimax-crystal-light?utm_source=googlePMX&utm_medium=DA-1-CPYY&utm_campaign=23882887852&utm_content=&ot_source=google&ot_medium=paidads&ot_cam=23882887852&ot_grp=&ot_ad=&gad_source=1&gad_campaignid=23882893822&gclid=CjwKCAjwpefSBhBvEiwAzyEtZ2hoFveyxHnQnC8gAy15Cx0cUuP7s8clvvn4QkSzIg0_PcufegD0HxoCN6gQAvD_BwE (https://pimax.com/blogs/crystal-light-tutorials/pc-requirements-for-the-pimax-crystal-light?utm_source=googlePMX&utm_medium=DA-1-CPYY&utm_campaign=23882887852&utm_content=&ot_source=google&ot_medium=paidads&ot_cam=23882887852&ot_grp=&ot_ad=&gad_source=1&gad_campaignid=23882893822&gclid=CjwKCAjwpefSBhBvEiwAzyEtZ2hoFveyxHnQnC8gAy15Cx0cUuP7s8clvvn4QkSzIg0_PcufegD0HxoCN6gQAvD_BwE)
You might consider a Quest 3 as well. The Q3 and CL are a real toss up when considering all things. Figure in a hard connection with the Q3 if you want to play beyond the normal battery life.
Thanks Randy! Been reading up on the CL and comparisons with quest, g2, etc. Tried to spin up the g2 yesterday afternoon. It’s a brick, after working fine the last time I used it a couple months ago. I’m liking the stats on the CL and the company philosophy behind VR gaming. Plus, offering an $80 rebate for using the G2. They don’t want it, just proof that I purchased it.
I’m going to go with the DMAS speakers on the initial buy, since you guys seem impressed with the improvement in sound quality. Any other “creature comfort” items I should consider?
Thanks for the reply! :salute
-
I run the C/L with an I9 12900k and a 12gb 3080 with shadows off at 120hz most all the time dipping to 90 on some maps at large congested airfields.
Definitely get the DMAS headphones
https://pimax.com/products/crystal-comfort-topstrap-second-generation
This easily adjusts so the headset is sitting on your head so the backstrap doesn’t have to be tight
https://www.studioformcreative.com/product-page/pimax-crystal-light-8k-x-foam-upgrade-kit-pu-leather
This facepiece is much more comfortable and the foam pieces allow a custom fit to your face alleviating almost all outside light
-
Thanks SNO! Was looking at the head strap and wondering about functionality vs cost. Likewise on the face piece. :salute
-
Puma at the bottom of this page are two pimax store codes for discount. One is $120 and the other is free DMAS earphones.
https://pimax.com/blogs/highlights/pimax-play-v1-41-1-update-smarter-rendering-better-performance?_pos=17&_sid=8e6482f38&_ss=r (https://pimax.com/blogs/highlights/pimax-play-v1-41-1-update-smarter-rendering-better-performance?_pos=17&_sid=8e6482f38&_ss=r)
-
Puma at the bottom of this page are two pimax store codes for discount. One is $120 and the other is free DMAS earphones.
https://pimax.com/blogs/highlights/pimax-play-v1-41-1-update-smarter-rendering-better-performance?_pos=17&_sid=8e6482f38&_ss=r (https://pimax.com/blogs/highlights/pimax-play-v1-41-1-update-smarter-rendering-better-performance?_pos=17&_sid=8e6482f38&_ss=r)
Thanks very much, my friend!
-
I think you might be able to use both.
-
What version of Pimax Play you guys running? Do you have any issues with your version? A year or so ago like Eagler, Pimax pushed an update and it was problems for me which I got resolved but have not upgraded since. I run my PP in offline mode so they can't push an update, currently I am running version 1.36.01.01.
-
What version of Pimax Play you guys running? Do you have any issues with your version? A year or so ago like Eagler, Pimax pushed an update and it was problems for me which I got resolved but have not upgraded since. I run my PP in offline mode so they can't push an update, currently I am running version 1.36.01.01.
SNO, what kind of problems did you and Eagler have? I’ve got a CL coming my way this next week. Would like to be pre-tweaked with the newbie issues. Thanks! :salute
-
If I recall, kept having usb connect issues where the headset wouldn’t fully connect. Rolled back and haven’t updated since. As I said I run in offline mode so pimax can’t push an update.
-
I had a firmware update that bricked the headset..
It was in a Friday or weekend and no one could help until the next week when they pushed a fix..
I haven't been prompted an update since
Eagler
-
Did you guys notice the lack of a customer service phone number? Over a week period, I tried taking advantage of their Reverb G2 discount. When adding the discount code and trying to checkout, and error code would appear as soon as I entered my info. Quite cumbersome dealing with the issue via chat. Finally escalated it and problem solved.
-
I conversed with them for the G2 discount and it went well.
-
I interacted with them via chat..
The fact they pushed a firmware update then couldn't help until the following Monday seemed odd and poor customer service to me.. :old:
But since then the headset hasn't given me any issues..
I look forward to using it at home as compared to quest 2 in the 5th wheel while at the in-laws..it's night and day..
Eagler
-
I recieved my CL a couple days ago and am having an issue with connecting dx11 with steam. I’ve tried several combinations of starting with dx11, starting via Pimax Play, and Steam. The game will open on the desktop but steam only shows me the dashboard with AH. Unable to proceed VR from any of the start options. Doing some research with AI, the following is presented:
Pimax Crystal Light + Aces High III DX11 VR
Running the standalone HiTech version.
Pimax Play current.
SteamVR current.
OpenXR runtime is Pimax.
Launching aceshigh11.exe, answering Yes to VR.
SteamVR starts, but remains on the Steam dashboard while Aces High opens as a normal 2D window on the monitor (not stereoscopic).
Has anyone seen this with the Crystal or Crystal Light, and is there a required launch sequence or setting?
Anyone else have the same issues? The CL visuals are amazing, just can’t get into the game VR. Thanks in advance! :salute
-
Pumma
Start Pimax play then hold the CL in front of you. You should see the CL in the bottom corner as your device. Then you will see the CL listed in the middle as tracking.
Then start Steam VR in Pimax Play upper right corner. You should see Steam VR pop up after the other steam panels load. and see the MS green Steam VR meter. Now start AH.
-
Thanks Randy. I’ll try that sequence and let you know. Have tried about every other combination with the same non results.
Just did it successfully twice, as you described.
You da man, Randy!
-
I start pimax play and hold the headset so it can be recognized by that app..
Once the icon is solid, I minimize pimax play..
Click on ah dx11.exe and say yes to using vr headset..
Steamvr then opens with AH opening..
Click on AH to get window focus on it and off steamvr..
Put headset on and I usually hit the button on jstick to center clipboard in view..
Click on clipboard with mouse to get into ma...
Eagler
-
Glad that helped Puma.
Watch your FPS then just keep dialing Pimax Play and Aces High Graphics till you get what you want.
-
Thanks for the replies and techniques, gents. That’s a consistent, successful process now.
Still in the process of fine tuning performance. On a whim a couple days ago, tried a question with ChatGPT. It’s been an impressive process. The initial display was a bit less than impressive but, better than the G2. The AI started with the CL, ruled that out as the issue by analyzing the settings. Then the PC system. Although, 9 years old and a beast in it’s day, still capable in AH and VR. A newer system (at some point) will optimize performance. The AI narrowed it down to the graphics card (3080) driver, which hasn’t been updated in some time. Totally my fault and now remedied. After doing that, the CL display is crystal clear and nearly as sharp as the monitor.
The remaining issue is frame rate. It’s at 10 and stays there even with the AH sliders all the way to the bottom, or the top (with CL set to 90). So, that’s the last step is to resolve. That’s this afternoon’s project with AI. I was quite impressed with the intricate analysis it goes through. No doubt on par with that of a formally educated IT professional, which I’m far from.
So, if there’s a nagging computer issue you can’t figure out, AI may be able to help. I’m impressed how fast AI can filter through the enormous amount of info on the web a pick out the exact answer for the problem, a process that would take days and untold amounts of frustration for me to accomplish.
Shout out and hearty salute to SNO. After seeing my early post about this, he called and we chatted for a bit. Followed up by sending me a series of screen shots of how his CL rig is set up. SNO’s settings and what AI had me select previously were nearly identical. So, not an AI, SNO is smart as one. Thanks my friend! :salute
-
Pumma try setting the pimax play to 72 fps and see what happens. Then try the 90 upscale.
In AH make sure Environment is set to None.
Make sure ground clutter is off.
-
Pumma try setting the pimax play to 72 fps and see what happens. Then try the 90 upscale.
In AH make sure Environment is set to None.
Make sure ground clutter is off.
Will do, Randy. Thanks!
-
After updating the Nvidia driver for the 3080 last night, a significant improvement has developed. First tested in the offline arena. In an airplane, initial fr was 40+ and up to the 80s after takeoff. Out of the VH in a tank, fr was 75 and varied dependent on what I was pointed at. Next to the online. Fr of 50 ish on the ground and was seeing 70-90 airborne, dependent what was out front. All this was with all the graphics sliders maxed out. So, pretty satisfied after correcting my driver negligence.
Thanks again for you expert help gents. :salute
-
Puma keep in mid too FPS can be map dependent. On the first map I tried after getting the CL I cranked up everything. It was a wow thing. Next map FPS tanked.
Iracing is thee same way. Wheen they redo a track graphics it tanks everyone's fps. Old tracks no issues.
-
Puma keep in mid too FPS can be map dependent. On the first map I tried after getting the CL I cranked up everything. It was a wow thing. Next map FPS tanked.
Iracing is thee same way. Wheen they redo a track graphics it tanks everyone's fps. Old tracks no issues.
Yeah, I’ve noticed that Randy. Thanks! So far, I’ve been very impressed with the improvement in visual clarity with the CL. An observation from previous headsets that holds true here also, with a new terrain, it pays to up whatever I’m going to operate and sit still for a short time and let the FR settle in and eventually recover to the norm.
Noticed my head position in VR is slightly offset to one side. Can’t remember or find a reference on how to adjust it in VR.
For you CL users do you leave your headset plugged into the power port, but with the display screen off?
-
On powering down the CL. I do power it down because the old G2 would turn on if the power went off and computer restarted.
I did a survey in iracing on this topic. Most people said no but they do make sure Pimax Play is indeed off. It use to be closing the program with the X did that but now that only minimizes Pimax Play so the screen is off but the headset remains warm to the touch.
-
I power mine down by closing PP, steam VR, then by your clock right click PP icon and close and do the same with steam vr. I have my video card running max performance when running the headset and until completely shutting it down the video card stays ramped up. So my headset is off unless I’m using it.
-
Got this in a pimax email
https://pimax.com/blogs/highlights/a-headset-for-every-gpu-2026-pimax-buying-guide?bg_ref=7Pmtg2vzUg&utm_source=Pimax+Newsletter&utm_campaign=0228a9fad9-Conversion_8_11_gpu_benchmark_US_History8_11_2026_&utm_medium=email&utm_term=0_-1bf68ce23d-574843998&ct=t(Conversion_8_11_gpu_benchmark _US_History8_11_2026_)&mc_cid=0228a9fad9&mc_eid=de5f6cfd03
Shows gpu suggestions by headset..
Eagler
-
Anyone running a 9070xt with this device? Thinking of eventually upgrading my 2080 with reverb g2. Getting back into gaming after a few years but damn have prices gotten ridiculous!
-
Anyone running a 9070xt with this device? Thinking of eventually upgrading my 2080 with reverb g2. Getting back into gaming after a few years but damn have prices gotten ridiculous!
Yes, do it! I’m new with the CL, and it’s a fantastic improvement over the G2. I’m running it with a 3080 and W10. Highly recommend adding the 15mm face pad, gen2 top strap, and DMAS speakers to optimize comfort. You won’t regret the upgrade. :salute
-
Too bad gpus are so damn expensive !