« previous next »
Pages: [1]   Go Down

Author Topic: CH Pro Pedals  (Read 319 times)

Offline Creamo

  • Parolee
  • Platinum Member
  • ******
  • Posts: 5976
      • http://www.fatchicksinpartyhats.com
CH Pro Pedals
« on: September 20, 2003, 03:47:16 PM »
I bought a new powered USB hub, and STILL, I have to crawl under my desk and unplug, replug in my Pro pedals after any length of time not using them to get them to be active.

I run it with a Saitek X45, WINXP.

Someone here has to have figured this out. It was the same on 3 diffrent computers if that helps.
Logged

Offline Eagler

  • Plutonium Member
  • *******
  • Posts: 18219
CH Pro Pedals
« Reply #1 on: September 20, 2003, 05:53:14 PM »
is your hub under your desk? You have the pedals plugged into the hub right?
Logged
"Masters of the Air" Scenario - JG27


Intel Core i7-13700KF | GIGABYTE Z790 AORUS Elite AX | 64GB G.Skill DDR5 | 16GB GIGABYTE RTX 4070 Ti Super | 850 watt ps | pimax Crystal Light | Warthog stick | TM1600 throttle | VKB Mk.V Rudder

Offline Creamo

  • Parolee
  • Platinum Member
  • ******
  • Posts: 5976
      • http://www.fatchicksinpartyhats.com
CH Pro Pedals
« Reply #2 on: September 20, 2003, 05:59:49 PM »
Nope, actually when I used the powered hub, it was worse, so Im back into the computers back hardmounted usb ports.

It's ok as long as I unplug and then replug and use them fairly consistantly.

I really don't get it, and I sometimes pride myself on troubleshooting the obvious. This has got me miffed though.
Logged

Offline Eagler

  • Plutonium Member
  • *******
  • Posts: 18219
WinXP
« Reply #3 on: September 20, 2003, 06:02:38 PM »
do you use the CH manager?

I didn't have to until I went XP
Logged
"Masters of the Air" Scenario - JG27


Intel Core i7-13700KF | GIGABYTE Z790 AORUS Elite AX | 64GB G.Skill DDR5 | 16GB GIGABYTE RTX 4070 Ti Super | 850 watt ps | pimax Crystal Light | Warthog stick | TM1600 throttle | VKB Mk.V Rudder

Offline Eagler

  • Plutonium Member
  • *******
  • Posts: 18219
CH Pro Pedals
« Reply #4 on: September 20, 2003, 06:03:43 PM »
Logged
"Masters of the Air" Scenario - JG27


Intel Core i7-13700KF | GIGABYTE Z790 AORUS Elite AX | 64GB G.Skill DDR5 | 16GB GIGABYTE RTX 4070 Ti Super | 850 watt ps | pimax Crystal Light | Warthog stick | TM1600 throttle | VKB Mk.V Rudder

Offline bigUC

  • Nickel Member
  • ***
  • Posts: 438
CH Pro Pedals
« Reply #5 on: September 20, 2003, 06:59:16 PM »
There is a checkbox in device manager that says something like "Allow Windows to shut down this device" etc.  It usually has something to do with power managment (i.e. notebook, desktop)  in the Control Panel.  I can't be bothered to look it up- Check it out yourself :-)
Logged
Kurt is winking at U!

Offline Creamo

  • Parolee
  • Platinum Member
  • ******
  • Posts: 5976
      • http://www.fatchicksinpartyhats.com
CH Pro Pedals
« Reply #6 on: October 31, 2003, 04:59:19 AM »
Case solved.

SIIG,Inc USB 2.0 + Firewire card.

It adds 3 USD ports, USB 2.0, takes my Sony Digicam DV input work well with the complete DV kit, and my pedals now always work.

Worth the purchase for Saitek/CH Pro Pedals users that had this problem, and adds so much more.

Thanks for the input though.
Logged
Pages: [1]   Go Up
« previous next »