Author Topic: Yamasaki Catleap 2560x1440 27" monitor  (Read 3443 times)

Offline Karnak

  • Radioactive Member
  • *******
  • Posts: 23047
Re: Yamasaki Catleap 2560x1440 27" monitor
« Reply #15 on: June 07, 2013, 02:03:06 PM »
I don't own it yet, Karnak, so I can't comment on it.  I'm getting tempted to pull the trigger though. 
Given the reviews on Amazon I doubt it has burn in issues. 
Petals floating by,
      Drift through my woman's hand,
             As she remembers me-

Offline numb1

  • Copper Member
  • **
  • Posts: 136
Re: Yamasaki Catleap 2560x1440 27" monitor
« Reply #16 on: June 07, 2013, 10:08:45 PM »
Given the reviews on Amazon I doubt it has burn in issues. 
http://www.youtube.com/watch?v=YD5MDUKBXig
I5-3570k,Asus Sabertooth,Corsair H100i,Corsair AX850,Two His IceQX2 7950 boost cards in crossfire,Cooler master Storm Stryker case,Western Digital 1tb HD,Intel 180gb SSD,Qnix 27in 1440p PLS OCed to 120hz monitor

Offline Pudgie

  • Silver Member
  • ****
  • Posts: 1280
Re: Yamasaki Catleap 2560x1440 27" monitor
« Reply #17 on: June 09, 2013, 08:33:18 PM »
Just as soon as 6-18-13 gets here (my CC will be paid & next month's statement amount will be set......low  :D) I'm gonna spring for the DoubleSight monitor that I posted a link for earlier...................... ..........


I'll post back w/ the results when it comes in & I get it all hooked up/set up...............

 :salute
Win 10 Home 64, AMD Ryzen 9 3900X, MSI MPG X570 Gaming Plus, GSkill FlareX 32Gb DDR4 3200 4x8Gb, XFX Radeon RX 6900X 16Gb, Samsung 950 Pro 512Gb NVMe PCI-E SSD (boot), Samsung 850 Pro 128Gb SATA SSD (pagefile), Creative SoundBlaster X7 DAC-AMP, Intel LAN, SeaSonic PRIME Gold 850W, all CLWC'd

Offline numb1

  • Copper Member
  • **
  • Posts: 136
Re: Yamasaki Catleap 2560x1440 27" monitor
« Reply #18 on: June 10, 2013, 02:17:19 AM »
That double site monitor look pricey for what you get..Why not get a monoprice monitor?It is cheaper and guaranteed perfect..I had one and i loved it.But i sent it back cause my Qnix i got is perfect and it OCes to 120hz...

The one you are looking at is not a good deal at all..Trust me i have been looking at 1440p monitors for 6 months everyday..

http://www.monoprice.com/products/product.asp?p_id=10489&seq=1&format=2


The doublesite is basically the same as this from microcenter..


http://microcenter.com/product/384780/EQ276W_27-Inch_IPS_LED_Monitor,_WQHD_2560x1440,_HDMI,_DVI-D,_DisplayPort,_USB
« Last Edit: June 10, 2013, 02:20:17 AM by numb1 »
I5-3570k,Asus Sabertooth,Corsair H100i,Corsair AX850,Two His IceQX2 7950 boost cards in crossfire,Cooler master Storm Stryker case,Western Digital 1tb HD,Intel 180gb SSD,Qnix 27in 1440p PLS OCed to 120hz monitor

Offline -ammo-

  • Platinum Member
  • ******
  • Posts: 5124
Re: Yamasaki Catleap 2560x1440 27" monitor
« Reply #19 on: June 10, 2013, 04:55:22 AM »
I don't own it yet, Karnak, so I can't comment on it.  I'm getting tempted to pull the trigger though. 

I ordered the Viewsonic this weekend - should be at the house NLT Friday.  I'm excited!   I find myself squinting and an overall struggle to play AH with my cheap ASUS 23".

Review forthcoming.
Commanding Officer, 56 Fighter Group
Retired USAF - 1988 - 2011

Offline katanaso

  • Gold Member
  • *****
  • Posts: 2480
Re: Yamasaki Catleap 2560x1440 27" monitor
« Reply #20 on: June 21, 2013, 09:16:54 AM »
I ordered the Viewsonic this weekend - should be at the house NLT Friday.  I'm excited!   I find myself squinting and an overall struggle to play AH with my cheap ASUS 23".

Review forthcoming.

Ammo,

Did you receive the monitor yet, and if so, what are your thoughts?

mir
80th FS "Headhunters"


The most terrifying words in the English language are: "I'm from the government and I'm here to help."

Offline -ammo-

  • Platinum Member
  • ******
  • Posts: 5124
Re: Yamasaki Catleap 2560x1440 27" monitor
« Reply #21 on: June 21, 2013, 10:38:37 AM »
Ammo,

Did you receive the monitor yet, and if so, what are your thoughts?



Yes I did and I never knew what I was missing!  The 2560x1440 WQHD is just amazing!  Double the resolution of 720.

AH is beautiful with this monitor.  The response time is enough and it is capable of 75 hertz refresh rate, although I run it at 60.  The 27 inches of real estate makes this monitor a tad big for my smallish computer desk, but its worth it.
Commanding Officer, 56 Fighter Group
Retired USAF - 1988 - 2011

Offline numb1

  • Copper Member
  • **
  • Posts: 136
Re: Yamasaki Catleap 2560x1440 27" monitor
« Reply #22 on: June 22, 2013, 12:11:46 AM »
Yes I did and I never knew what I was missing!  The 2560x1440 WQHD is just amazing!  Double the resolution of 720.

AH is beautiful with this monitor.  The response time is enough and it is capable of 75 hertz refresh rate, although I run it at 60.  The 27 inches of real estate makes this monitor a tad big for my smallish computer desk, but its worth it.
Actually its almost 4 times the resolution..720p 1 million pixels 1440p 3.6 million..
I5-3570k,Asus Sabertooth,Corsair H100i,Corsair AX850,Two His IceQX2 7950 boost cards in crossfire,Cooler master Storm Stryker case,Western Digital 1tb HD,Intel 180gb SSD,Qnix 27in 1440p PLS OCed to 120hz monitor

Offline MrRiplEy[H]

  • Persona Non Grata
  • Plutonium Member
  • *******
  • Posts: 11633
Re: Yamasaki Catleap 2560x1440 27" monitor
« Reply #23 on: June 22, 2013, 02:59:55 AM »
Yes I did and I never knew what I was missing!  The 2560x1440 WQHD is just amazing!  Double the resolution of 720.

AH is beautiful with this monitor.  The response time is enough and it is capable of 75 hertz refresh rate, although I run it at 60.  The 27 inches of real estate makes this monitor a tad big for my smallish computer desk, but its worth it.

What about your framerates? I guess you had a pretty beefy graphics card.
Definiteness of purpose is the starting point of all achievement. –W. Clement Stone

Offline numb1

  • Copper Member
  • **
  • Posts: 136
Re: Yamasaki Catleap 2560x1440 27" monitor
« Reply #24 on: June 22, 2013, 04:30:30 AM »
Yes I did and I never knew what I was missing!  The 2560x1440 WQHD is just amazing!  Double the resolution of 720.

AH is beautiful with this monitor.  The response time is enough and it is capable of 75 hertz refresh rate, although I run it at 60.  The 27 inches of real estate makes this monitor a tad big for my smallish computer desk, but its worth it.
So you were able to  OC it to 75hz?
I5-3570k,Asus Sabertooth,Corsair H100i,Corsair AX850,Two His IceQX2 7950 boost cards in crossfire,Cooler master Storm Stryker case,Western Digital 1tb HD,Intel 180gb SSD,Qnix 27in 1440p PLS OCed to 120hz monitor

Offline -ammo-

  • Platinum Member
  • ******
  • Posts: 5124
Re: Yamasaki Catleap 2560x1440 27" monitor
« Reply #25 on: June 22, 2013, 08:07:40 AM »
What about your framerates? I guess you had a pretty beefy graphics card.

Real good question.  Prior to plugging the new monitor in, I was running 1600x1080, and my frame rates were running high 60s and would drop to 40s in furballs.  My video card, ATI 6950, did well and was not over clocked.  Since installing the new monitor, with all the AH detail settings maxed, running 2560x1440, the frame rates have dropped considerably. I have gone as low as single digits in very congested areas.  I over clocked the card and it helped a little, but to remain playable in all situations, I had to scale back on the detail settings.  Now I get around 50-55 just cruising around and see 30s in congestion. 

So, to really capitalize on the high resolution,  I need to upgrade my video card.  Even so,  the monitor is simply beautiful, and AH is much better at 2560x1440.
Commanding Officer, 56 Fighter Group
Retired USAF - 1988 - 2011

Offline Karnak

  • Radioactive Member
  • *******
  • Posts: 23047
Re: Yamasaki Catleap 2560x1440 27" monitor
« Reply #26 on: June 22, 2013, 09:02:12 AM »
It is looking like my financial situation may have taken a marked turn for the better.  If so I will likely be getting the Viewsonic 27" screen and a new computer in the next six months or so.
Petals floating by,
      Drift through my woman's hand,
             As she remembers me-

Offline -ammo-

  • Platinum Member
  • ******
  • Posts: 5124
Re: Yamasaki Catleap 2560x1440 27" monitor
« Reply #27 on: June 25, 2013, 06:27:25 AM »
It is looking like my financial situation may have taken a marked turn for the better.  If so I will likely be getting the Viewsonic 27" screen and a new computer in the next six months or so.

Hope your plan works out!  I did a lot of reading, talking, and general research prior to purchasing the Viewsonic.  All in all, the most positive reviews were in the corner of the Viewsonic.  Not one dead pixel, and I haven't experienced any "bright" spots like some have stated in reviews.

The two 27" WQHD Dell models also had great reviews, but in the end I went this direction.  I even considered some of the Apple models, but shat, they want more for those than I have paid for cars.
Commanding Officer, 56 Fighter Group
Retired USAF - 1988 - 2011

Offline -ammo-

  • Platinum Member
  • ******
  • Posts: 5124
Commanding Officer, 56 Fighter Group
Retired USAF - 1988 - 2011

Offline Pudgie

  • Silver Member
  • ****
  • Posts: 1280
Re: Yamasaki Catleap 2560x1440 27" monitor
« Reply #29 on: June 29, 2013, 02:59:12 PM »
Well I jumped off the ledge & bought the DoubleSight DS-279W monitor that I posted a link to earlier.
So far this thing is a beauty to behold. Got reading up on the company before I bought it....DoubleSight's speciality is building business-class multi-monitor set ups for the business world but also offer models that are suited for business/home use (such as this one).

Compared to the Dell U2713H & the ViewSonic V2770 (direct comparison units) it matches up feature for feature w/ the exception of the USB interface capability, has actual buttons under the bezel...no touchscreen. The DoubleSight is heavier than the other 2 by 2-3 lbs but is approx. $130.00 or more less than the others as listed on Newegg (DS-279W listed on Newegg for $613.99, ViewSonic V2770 listed for $749.99 & Dell U2713H listed for $999.00). I know you can find these units elsewhere cheaper than the Egg but I couldn't find another carrier of the DoubleSight products (other than DoubleSight's site which it goes for $699.99....cheaper on the Egg) to make the comparisons relative. This monitor offers PIP capability thru the VGA & DVI-D ports but ole Pudgie don't need that right now but nice to know that the feature is there. After dealing w/ Newegg for approx 13 years in this hobby of mine & have never had a problem w/ them I just tend to stay w/ them. My local option is Best Buy where I live & that ain't  an option as they are SOOOOO FAR behind the tech curve compared to the Egg it ain't funny!

I got a perfect panel (no dead pixels, no bright spots, no IPS glow, no burn in issues)....now I see why IPS panels are preferred! The response times & input lag in-game is near perfect....this monitor is actually far better than the HP 2710m TN panel it replaced in this regard as I have not witnessed any ghosting even when I make quick stick moves over water (could see some slight ghosting on the HP 2710M when I did this over water & it is rated at 2.5ms GTG response time vs the DS-279W at 6ms GTG response time. As far as input lag goes I couldn't see/tell any difference between the 2) & this HP 2710m was a pretty good performer. The smoothness of motion along w/ the color reproduction & sharpness of detail is simply AWESOME!

The display is simply GORGEOUS & the 2560 x 1440 x 32 res let's the Titan flex it's strengths. I'm taken aback at how good I can SEE things on screen w/o my glasses! So far my FPS has stayed at 59-60 at fully maxed settings regardless w/ the Titan at stock settings. I finally went into my Rampage IV Gene & set up the normal OC profile instead of the stock X.M.P. profile so my I7 3820 is clocking 4375 GHz now instead of 3873 GHz & doing it w/ ease & which further helped the Titan to perform even better.

The 1 thing that I did have some issue with was setting up the monitor initially to use DVI-D. The monitor came w/ no paper manual to read (manual on the DVD). Since this monitor is designed w/ businesses in mind (read IT personnel here) I found that it doesn't have the auto signal select feature as my HP did & the bezel buttons have multi-function capabilities other than what is engraved on the bezel above them. I initially hooked her up w/ DVI-D cabling to the DVI-D port on the monitor & vid card but the monitor kept showing a no signal found box & going into sleep mode. I was following the engraved button labeling & thought I was setting it up but got nowhere. After 3 hrs trying (swapping vid cards as well to verify that it wasn't the Titan) I swapped to the VGA cable to see what would happen & it lit up.....? When I popped in the DVD to load the drivers I then read the manual....saw that I was hitting the wrong button to save the config choice (once you use the select button the vol+ button becomes the save button....)....VGA is the default setting.....duh! Shut down, pulled the VGA cabling & adapter off, hooked the DVI-D cabling back up the way I had initially had it & then proceeded w/ the RIGHT button sequencing & voila! All is golden since. Now I see why many IT folks switch careers so frequently............... :D

Other than this little gem of an issue all went well & I'm very happy w/ this piece of kit.
Can you find cheaper.....yes you can................

 :x :salute :aok

Win 10 Home 64, AMD Ryzen 9 3900X, MSI MPG X570 Gaming Plus, GSkill FlareX 32Gb DDR4 3200 4x8Gb, XFX Radeon RX 6900X 16Gb, Samsung 950 Pro 512Gb NVMe PCI-E SSD (boot), Samsung 850 Pro 128Gb SATA SSD (pagefile), Creative SoundBlaster X7 DAC-AMP, Intel LAN, SeaSonic PRIME Gold 850W, all CLWC'd