Author Topic: mini freezes ?? (Read 524 times)

DRILL · « **on:** April 25, 2002, 03:45:54 PM »

any one else get 1/2 sec to sec min freezes ??? scents i put in the new patch i seem to get them ..when i never had them before

talked to a few others they say they get em anyone got any idea's ??

Bozz · « **Reply #1 on:** April 25, 2002, 07:38:29 PM »

Sometimes I do, but it only happens when i pull the trigger with cons around, it just pauses really fast before the tracers come, pretty strange, but still playable on my end

Greese · « **Reply #2 on:** April 26, 2002, 12:24:09 AM »

Any ideas? I get it bad whenever I pull the trigger. Makes it darn difficult to play. If I pull the trigger, the screen freezes for at least a 1/2 second, and then I'm dead....

Gunthr · « **Reply #3 on:** April 26, 2002, 05:46:33 AM »

I sometimes get that when I start the recorder.

Lephturn · « **Reply #4 on:** April 26, 2002, 08:02:44 AM »

If you guys provide system details, OS version, and driver version information it would help. With no info to work with, it makes it pretty hard to give you any advice.

DRILL · « **Reply #5 on:** April 26, 2002, 08:39:06 AM »

guess i didnt put the info in sorry

AMD ATHON 1.4
GF3 2311 drivers
512 ram
win 98 se
DX 8.1

iv updated all the drivers still get mini freezs

Shamus · « **Reply #6 on:** April 26, 2002, 08:57:54 AM »

When I get the mini-freeze that DRILL is getting a defrag seems to help. I am running the same OS,vid card, procceser, 256meg of ram

Shamus

SKurj · « **Reply #7 on:** April 26, 2002, 09:30:36 AM »

If the freeze occurs when u fire guns.. do this...

Control Panel
Multimedia
audio
advanced properties
performance tab

Move the hardware acceleration slider 1-2 notches to the left
test, and adjust

SKurj

Greese · « **Reply #8 on:** April 26, 2002, 10:50:55 AM »

Thanks Skurj, I'll do that. I'm also going to update my video drivers.

Edit:

System specs:

P4 1.5ghz
geforce2 32mb GTS
256 mb RAM
40gig HD

fuzeman · « **Reply #9 on:** April 26, 2002, 11:38:18 AM »

I rarely get minifreezes, but I do get them. Do any of you change the primary guns? I've noticed REAL wacky stuff when I try that.

Duron 750 o'cked to 850
128 Ram [soon to go up to 256 I hope]
Abit KT7A
GeForce2MX O'clked about 10%
[IF remember to before I run game]
[running 14.20 Det w coolbits enabled using 2 files from 14.21]
Win98se

fuzeman

DRILL · « **Reply #10 on:** April 27, 2002, 09:55:28 AM »

> BUMP < ..................^

SKurj · « **Reply #11 on:** April 27, 2002, 10:18:13 AM »

fuze?

change primary guns? no sure what you mean...
i map primary to b2 on my stick.. and use mitsu's sounds..

SKurj

fuzeman · « **Reply #12 on:** April 27, 2002, 01:10:49 PM »

Quote

Originally posted by SKurj
fuze?

change primary guns? no sure what you mean...
i map primary to b2 on my stick.. and use mitsu's sounds..

SKurj

The \ key is the 'Select Primary Weapon' key and it seems to switch the gun used as the 'Primary' gun. On the P51 it changes the primary from the inboard singles to the outboard dual .50s.
When I do that, I sometimes got wacky results, guns firing without graphic flashes, sound, etc. I'm not really sure when that key would be used and I should probably just unmap it on my Joystick. I do have the fire secondary and fire both which I do use.
I can try it again and let you know exactly what happens, when I select a different primary gun. I'm not sure if it acted differently only when rockets and bombs were loaded but I had them loaded when I reverified the 'wackiness' before I posted this.

fuzeman

DRILL · « **Reply #13 on:** May 01, 2002, 04:13:28 PM »

well i fixed my little frees so far iv not had them .. i updated my drivers to 28 90 i think it was and have np .

Lephturn · « **Reply #14 on:** May 03, 2002, 08:22:40 AM »

Heh, now do me a favour... never "upgrade" drivers again!

Seriously... if you have it all working fine, I would stay with these drivers until you are absolutely forced to change. Don't try newer ones in the hopes of a speed increase.... because in my experience the tiny increase always comes with increased risk of problems.

Thanks for the update... I'll recommend the 28.90's to others if they have similar problems.