Author Topic: Logitechs Calibration problems  (Read 235 times)

Offline ozrocker

  • Gold Member
  • *****
  • Posts: 3640
Logitechs Calibration problems
« on: April 27, 2005, 04:45:12 PM »
If you have a Logitech stick and have problems after calibrating, go to their site, download and run the "Clear Calibration" Utility, recalibrate in windows, but not in AH.
                                                      Oz
Flying and dying since Tour 29
The world is grown so bad. That wrens make prey where eagles dare not perch.- Shakespeare
 
30% Disabled Vet  US ARMY- 11C2H 2/32 AR. 3rd AD, 3/67AR. 2nd AD, 2/64 AR. 3rd ID, ABGD Command TRADOC, 1/16th INF. 1st ID

Offline StarOfAfrica2

  • Platinum Member
  • ******
  • Posts: 5162
      • http://www.vf-17.org
Logitechs Calibration problems
« Reply #1 on: April 27, 2005, 04:57:09 PM »
Which will work for problem calibrations really only on Win95/98/ME.  They had to write that little bit of software because they had a problem with the registry entries corrupting all the time.  The utility wipes the registry info as well as unistalling the drivers.  WinXP and 2k dont have that problem as far as I know, any calibration problems there are just a result of Logitech's poor construction and cheap materials.

Offline buzkill

  • Nickel Member
  • ***
  • Posts: 686
Logitechs Calibration problems
« Reply #2 on: April 27, 2005, 06:45:57 PM »
on my second one now.....i can see why, and am glad they are so cheap:mad:

Offline ozrocker

  • Gold Member
  • *****
  • Posts: 3640
Logitechs Calibration problems
« Reply #3 on: April 27, 2005, 08:40:05 PM »
Got xp, it clears registry, but doesn't uninstall drivers here.
                                                        Oz
Flying and dying since Tour 29
The world is grown so bad. That wrens make prey where eagles dare not perch.- Shakespeare
 
30% Disabled Vet  US ARMY- 11C2H 2/32 AR. 3rd AD, 3/67AR. 2nd AD, 2/64 AR. 3rd ID, ABGD Command TRADOC, 1/16th INF. 1st ID

Offline buzkill

  • Nickel Member
  • ***
  • Posts: 686
Logitechs Calibration problems
« Reply #4 on: April 27, 2005, 09:02:00 PM »
drivers don't help...from what i can tell they got bad pots right outa the box....or other bad internals....always either spiky or losing calibration

Offline StarOfAfrica2

  • Platinum Member
  • ******
  • Posts: 5162
      • http://www.vf-17.org
Logitechs Calibration problems
« Reply #5 on: April 28, 2005, 03:33:17 AM »
Cheap material more than anything.  I've actually seen bubbles in the plastic before where one broke.  I do happen to have an old FF one that I keep in the closet for extreme emergencies, but its so porked I cant really fly with it very much.  

First trick to getting any usefulness out of the Logicrap sticks is, uninstall all the software, the drivers, and run the utility.  Take the CD and before disposing of it forever, reboot and then reinstall JUST the drivers, and then say bye bye to the CD.  Make a christmas ornament out of it, or  use it for skeet shooting, play frisbee with it, do something, anything but reinstall the software off of it.  Whatever you do, DONT put it back in your computer.  

Hook the stick back up, and set it up in Windows.  NO CONTROLLER SOFTWARE.  Just calibrate it.  Go into AH and set it up also.  Calibrate, set your buttons, etc.  Set your dampers to cover any spikes.  The left pots seem to be the worst for some reason, but the twist rudder gets all spiky too sometimes.  Not installing the control software seems to help, but it never completely goes away unless you buy a new stick.

Last thing to remember about Logitech is NEVER, under ANY circumstances upgrade your drivers from their website.  It has never failed, no matter what version of driver I tried to install with one of these sticks, upgrading from the website totally PORKS everything.  Whatever problems you might have had before will become twice as bad, if not more.

Offline buzkill

  • Nickel Member
  • ***
  • Posts: 686
Logitechs Calibration problems
« Reply #6 on: April 28, 2005, 05:34:15 AM »
tried it all...didn't even use cd to install this one and it was fine.....for a week:mad: