Author Topic: cannot map joystick to vehicle controls  (Read 322 times)

Offline sethipus

  • Copper Member
  • **
  • Posts: 304
cannot map joystick to vehicle controls
« on: June 13, 2007, 04:17:54 AM »
Guys, I know about the profiles.  I select profile 2, the vehicle and ship profile, and the problem is I am unable to set my X and Y axis to anything but the "analog" controls.  All of the other control radio buttons in the "modify" dialog box are grayed out.  At first I thought it was just a problem with my 7 year old Microsoft Sidewinder II joystick, even though when I played this game last year I ran vehicles just fine.

Nope, I bought a CH Combatstick today and set it up and it has the exact same bug.  I go in and the only things I can set the joystick for (X and Y axis) is analog controls, and moving and turning vehicles and turrets are not part of the analog controls.

Anyone know what the heck is wrong?   Until I get this figured out I cannot run ground vehicles or LVTs and whatnot, at least not using the joystick.
« Last Edit: June 13, 2007, 04:24:12 AM by sethipus »

Offline TequilaChaser

  • AH Training Corps - Retired
  • Plutonium Member
  • *******
  • Posts: 10173
      • The Damned - founded by Ptero in 1988
cannot map joystick to vehicle controls
« Reply #1 on: June 13, 2007, 07:14:28 AM »
sethipus, try the following 2 weblinks: they should get you where you need to be.......

http://trainers.hitechcreations.com/setup/setup.htm


http://trainers.hitechcreations.com/controllers/controllers.htm


and here is link to full website:

http://trainers.hitechcreations.com/


hope this helps
"When one considers just what they should say to a new pilot who is logging in Aces High, the mind becomes confused in the complex maze of info it is necessary for the new player to know. All of it is important; most of it vital; and all of it just too much for one brain to absorb in 1-2 lessons" TC

Offline Scca

  • Gold Member
  • *****
  • Posts: 2718
cannot map joystick to vehicle controls
« Reply #2 on: June 13, 2007, 07:27:55 AM »
Look at TC's links, but I found the first thing I did was copy mode 1 to mode 2 (there is a way to do this).  Second, make sure you have are automatically switching to mode 2 when in a vehicle.  It's possible you are still in mode 1 when you up a GV.
Flying as AkMeathd - CO Arabian Knights
Working on my bbs cred one post at a time

http://www.arabian-knights.org

Offline hubsonfire

  • Plutonium Member
  • *******
  • Posts: 8658
cannot map joystick to vehicle controls
« Reply #3 on: June 13, 2007, 04:17:31 PM »
^^ That's exactly what I did, then changed the relevant buttons and scalings. I'd bet that's your problem. Make sure you've got the mode buttons mapped if you're not using auto.
mook
++Blue Knights++

Proper punctuation and capitalization go a long way towards people paying attention to your posts.  -Stoney
I was wondering why I get ignored so often.  -Hitech

Offline fuzeman

  • Aces High CM Staff
  • Plutonium Member
  • *******
  • Posts: 9007
Re: cannot map joystick to vehicle controls
« Reply #4 on: June 13, 2007, 05:35:52 PM »
Quote
Originally posted by sethipus

I go in and the only things I can set the joystick for (X and Y axis) is analog controls, and moving and turning vehicles and turrets are not part of the analog controls.


While they are not in the listing of analog controls they do in fact use your analog controller to control them.
Examples [1] The gas and brake for vehicles is forward and back on the joystick. [2] Steering vehicles left or right is left or right movement of your controller. [3] Traversing a turret left or right is left or right movement of your controller.
Far too many, if not most, people on this Board post just to say something opposed to posting when they have something to say.

"Masters of the Air" Scenario - JG54