Author Topic: A little help would be nice :)  (Read 717 times)

Offline Banshee7

  • Platinum Member
  • ******
  • Posts: 6595
A little help would be nice :)
« on: April 04, 2009, 11:36:19 PM »
Here's the situation.  I have an older computer, been playing fine (except for the occasional drop in FR).  Today, it just went bad.  I usually fly in Medium Vis Mode and get FR of 60....today, it dropped to 15, and FR of 5 when i got around trees.  To make matters worse, the whole thing locked up on me when I alt tabbed out and open internet to look for tips.  Finally, during an RTB, the computer just crashed into a blank blue screen (this has also happened before).

Here is DXDIAG

------------------
System Information
------------------
Time of this report: 4/4/2009, 22:36:34
       Machine name: DGC0RV61
   Operating System: Windows XP Home Edition (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.080814-1236)
           Language: English (Regional Setting: English)
System Manufacturer: Dell Inc.                
       System Model: Dimension 8400              
               BIOS: Phoenix ROM BIOS PLUS Version 1.10 A04
          Processor: Intel(R) Pentium(R) 4 CPU 3.20GHz (2 CPUs)
             Memory: 510MB RAM
          Page File: 450MB used, 793MB available
        Windows Dir: C:\WINDOWS
    DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
     DxDiag Version: 5.03.2600.5512 32bit Unicode

------------
DxDiag Notes
------------
  DirectX Files Tab: No problems found.
      Display Tab 1: No problems found.
        Sound Tab 1: No problems found.
          Music Tab: No problems found.
          Input Tab: No problems found.
        Network Tab: No problems found.

--------------------
DirectX Debug Levels
--------------------
Direct3D:    0/4 (n/a)
DirectDraw:  0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay:  0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow:  0/6 (retail)

---------------
Display Devices
---------------
        Card name: ATI Radeon X300/X550/X1050 Series
     Manufacturer: ATI Technologies Inc.
        Chip type: ATI Radeon Graphics Processor (0x5B60)
         DAC type: Internal DAC(400MHz)
       Device Key: Enum\PCI\VEN_1002&DEV_5B60&SUBSYS_03021002&REV_00
   Display Memory: 128.0 MB
     Current Mode: 1024 x 768 (32 bit) (60Hz)
          Monitor: Plug and Play Monitor
  Monitor Max Res: 1600,1200
      Driver Name: ati2dvag.dll
   Driver Version: 6.14.0010.6891 (English)
      DDI Version: 9 (or higher)
Driver Attributes: Final Retail
 Driver Date/Size: 12/1/2008 15:51:31, 318464 bytes
      WHQL Logo'd: Yes
  WHQL Date Stamp: n/a
              VDD: n/a
         Mini VDD: ati2mtag.sys
    Mini VDD Date: 12/1/2008 17:13:40, 3452928 bytes
Device Identifier: {D7B71EE2-1820-11CF-5969-0823A1C2CB35}
        Vendor ID: 0x1002
        Device ID: 0x5B60
        SubSys ID: 0x03021002
      Revision ID: 0x0000
      Revision ID: 0x0000
      Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV8_B ModeWMV8_A ModeWMV9_B ModeWMV9_A
 Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalSt retch
                   {552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                   {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalSt retch
         Registry: OK
     DDraw Status: Enabled
       D3D Status: Enabled
       AGP Status: Enabled
DDraw Test Result: Not run
 D3D7 Test Result: Not run
 D3D8 Test Result: Not run
 D3D9 Test Result: Not run

-------------
Sound Devices
-------------
            Description: SoundMAX Digital Audio
 Default Sound Playback: Yes
 Default Voice Playback: Yes
            Hardware ID: PCI\VEN_8086&DEV_266E&SUBSYS_01771028&REV_03
        Manufacturer ID: 65535
             Product ID: 65535
                   Type: WDM
            Driver Name: smwdm.sys
         Driver Version: 5.12.0001.5243 (English)
      Driver Attributes: Final Retail
            WHQL Logo'd: Yes
          Date and Size: 10/29/2004 15:14:44, 260096 bytes
            Other Files:
        Driver Provider: Analog Devices
         HW Accel Level: Full
              Cap Flags: 0xF5F
    Min/Max Sample Rate: 100, 192000
Static/Strm HW Mix Bufs: 33, 32
 Static/Strm HW 3D Bufs: 33, 32
              HW Memory: 0
       Voice Management: Yes
 EAX(tm) 2.0 Listen/Src: Yes, Yes
   I3DL2(tm) Listen/Src: Yes, Yes
Sensaura(tm) ZoomFX(tm): Yes
               Registry: OK
      Sound Test Result: Not run

---------------------
Sound Capture Devices
---------------------
            Description: SoundMAX Digital Audio
  Default Sound Capture: Yes
  Default Voice Capture: Yes
            Driver Name: smwdm.sys
         Driver Version: 5.12.0001.5243 (English)
      Driver Attributes: Final Retail
          Date and Size: 10/29/2004 15:14:44, 260096 bytes
              Cap Flags: 0x41
           Format Flags: 0xCCC

-----------
DirectMusic
-----------
        DLS Path: C:\WINDOWS\SYSTEM32\drivers\GM.DLS
     DLS Version: 1.00.0016.0002
    Acceleration: n/a
           Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
                  SoundMAX Digital Audio, Software (Kernel Mode), Output, DLS, Internal
                  Microsoft MIDI Mapper [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                  Microsoft GS Wavetable SW Synth [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
        Registry: OK
     Test Result: Not run

-------------------
DirectInput Devices
-------------------
      Device Name: Mouse
         Attached: 1
    Controller ID: n/a
Vendor/Product ID: n/a
        FF Driver: n/a

      Device Name: Keyboard
         Attached: 1
    Controller ID: n/a
Vendor/Product ID: n/a
        FF Driver: n/a

      Device Name: Saitek X52 Flight Controller
         Attached: 1
    Controller ID: 0x0
Vendor/Product ID: 0x06A3, 0x075C
        FF Driver: n/a

Poll w/ Interrupt: No
         Registry: OK

-----------
USB Devices
-----------
+ USB Root Hub
| Vendor/Product ID: 0x8086, 0x265A
| Matching Device ID: usb\root_hub
| Service: usbhub
| Driver: usbhub.sys, 4/13/2008 13:45:37, 59520 bytes
| Driver: usbd.sys, 8/4/2004 06:00:00, 4736 bytes


Tours 86 - 296

Offline Banshee7

  • Platinum Member
  • ******
  • Posts: 6595
Re: A little help would be nice :)
« Reply #1 on: April 04, 2009, 11:36:53 PM »
----------------
Gameport Devices
----------------

------------
PS/2 Devices
------------
+ Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
| Matching Device ID: *pnp0303
| Service: i8042prt
| Driver: i8042prt.sys, 4/13/2008 14:18:00, 52480 bytes
| Driver: kbdclass.sys, 4/13/2008 13:39:47, 24576 bytes
|
+ HID Keyboard Device
| Matching Device ID: hid_device_system_keyboard
| Service: kbdhid
| Driver: kbdhid.sys, 4/13/2008 13:39:48, 14592 bytes
| Driver: kbdclass.sys, 4/13/2008 13:39:47, 24576 bytes
|
+ Terminal Server Keyboard Driver
| Matching Device ID: root\rdp_kbd
| Upper Filters: kbdclass
| Service: TermDD
| Driver: termdd.sys, 4/13/2008 19:13:20, 40840 bytes
| Driver: kbdclass.sys, 4/13/2008 13:39:47, 24576 bytes
|
+ PS/2 Compatible Mouse
| Matching Device ID: *pnp0f13
| Service: i8042prt
| Driver: i8042prt.sys, 4/13/2008 14:18:00, 52480 bytes
| Driver: mouclass.sys, 4/13/2008 13:39:47, 23040 bytes
|
+ HID-compliant mouse
| Matching Device ID: hid_device_system_mouse
| Service: mouhid
| Driver: mouclass.sys, 4/13/2008 13:39:47, 23040 bytes
| Driver: mouhid.sys, 8/17/2001 13:48:00, 12160 bytes
|
+ Terminal Server Mouse Driver
| Matching Device ID: root\rdp_mou
| Upper Filters: mouclass
| Service: TermDD
| Driver: termdd.sys, 4/13/2008 19:13:20, 40840 bytes
| Driver: mouclass.sys, 4/13/2008 13:39:47, 23040 bytes

----------------------------
DirectPlay Service Providers
----------------------------
DirectPlay8 Modem Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.5512)
DirectPlay8 Serial Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.5512)
DirectPlay8 IPX Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.5512)
DirectPlay8 TCP/IP Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.5512)
Internet TCP/IP Connection For DirectPlay - Registry: OK, File: dpwsockx.dll (5.03.2600.5512)
IPX Connection For DirectPlay - Registry: OK, File: dpwsockx.dll (5.03.2600.5512)
Modem Connection For DirectPlay - Registry: OK, File: dpmodemx.dll (5.03.2600.5512)
Serial Connection For DirectPlay - Registry: OK, File: dpmodemx.dll (5.03.2600.5512)

DirectPlay Voice Wizard Tests: Full Duplex: Not run, Half Duplex: Not run, Mic: Not run
DirectPlay Test Result: Not run
Registry: OK

-------------------
DirectPlay Adapters
-------------------
DirectPlay8 Modem Service Provider: Intel(R) 537EP V9x DF PCI Modem
DirectPlay8 Serial Service Provider: COM1
DirectPlay8 Serial Service Provider: COM3
DirectPlay8 TCP/IP Service Provider: Local Area Connection - IPv4 -

-----------------------
DirectPlay Voice Codecs
-----------------------
Voxware VR12 1.4kbit/s
Voxware SC06 6.4kbit/s
Voxware SC03 3.2kbit/s
MS-PCM 64 kbit/s
MS-ADPCM 32.8 kbit/s
Microsoft GSM 6.10 13 kbit/s
TrueSpeech(TM) 8.6 kbit/s

-------------------------
DirectPlay Lobbyable Apps
-------------------------

------------------------
Disk & DVD/CD-ROM Drives
------------------------
      Drive: C:
 Free Space: 85.4 GB
Total Space: 149.4 GB
File System: NTFS
      Model: ST3160023AS

      Drive: D:
      Model: JLMS DVD-ROM XJ-HD166
     Driver: c:\windows\system32\drivers\cdrom.sys, 5.01.2600.5512 (English), 4/13/2008 13:40:46, 62976 bytes

      Drive: E:
      Model: _NEC DVD+-RW ND-3450A
     Driver: c:\windows\system32\drivers\cdrom.sys, 5.01.2600.5512 (English), 4/13/2008 13:40:46, 62976 bytes

If any more is needed, please let me know



Thanks,



Banshee7
Tours 86 - 296

Offline Skuzzy

  • Support Member
  • Administrator
  • *****
  • Posts: 31462
      • HiTech Creations Home Page
Re: A little help would be nice :)
« Reply #2 on: April 05, 2009, 06:13:39 AM »
Sounds like something has been added to your background processes.  It would not take much to get your computer starved of resources with it only having 512MB of RAM.

Once file swapping starts, it will kill the performance of the game.  Check the background processes and available free memory in the task manager for a start.
Roy "Skuzzy" Neese
support@hitechcreations.com

Offline Banshee7

  • Platinum Member
  • ******
  • Posts: 6595
Re: A little help would be nice :)
« Reply #3 on: April 05, 2009, 11:39:10 AM »
Is there a list anywhere of processes that I can and cannot turn off?

Tours 86 - 296

Offline Lye-El

  • Silver Member
  • ****
  • Posts: 1466
Re: A little help would be nice :)
« Reply #4 on: April 05, 2009, 01:14:17 PM »
You could try downloading Alacrity. When you run it the program will suggest what to leave running, what can be shut down. Once you set it up just run before you want to play AH and it will automatically shut down everything in your list. It will even start AH after it completes its run.

Blackviper.com will also give you some guidance on what services do what.


i dont got enough perkies as it is and i like upen my lancs to kill 1 dang t 34 or wirble its fun droping 42 bombs

Offline Banshee7

  • Platinum Member
  • ******
  • Posts: 6595
Re: A little help would be nice :)
« Reply #5 on: April 05, 2009, 01:50:46 PM »
I've been using endItAll2..i guess it's time to upgrade lol
Tours 86 - 296

Offline Skuzzy

  • Support Member
  • Administrator
  • *****
  • Posts: 31462
      • HiTech Creations Home Page
Re: A little help would be nice :)
« Reply #6 on: April 05, 2009, 02:10:00 PM »
I do not know what you have the "Maximum Texture Size" set to, but you could lower it and see if it helps with the resource issues.  Might want to kill all the skins as well.
Roy "Skuzzy" Neese
support@hitechcreations.com

Offline Banshee7

  • Platinum Member
  • ******
  • Posts: 6595
Re: A little help would be nice :)
« Reply #7 on: April 05, 2009, 03:34:14 PM »
Max Text is at 512.  How do I get rid of all my skins except for like the 3 or 4 i want?
Tours 86 - 296

Offline Skuzzy

  • Support Member
  • Administrator
  • *****
  • Posts: 31462
      • HiTech Creations Home Page
Re: A little help would be nice :)
« Reply #8 on: April 05, 2009, 03:38:18 PM »
Remove them from the 'skins' folder in the game and remove all the files in the 'cache' folder.

Set the 'Maximum Texture Size' to 256 and see what it does as well.

I am just troubleshooting.  The description you give sounds like resource related problems, which could easily be the case.  In order to verify that, reducing the resources used by everything in the computer should result in some gains in game performance, once you get passed the computer having to swap.
Roy "Skuzzy" Neese
support@hitechcreations.com

Offline bj229r

  • Platinum Member
  • ******
  • Posts: 6732
Re: A little help would be nice :)
« Reply #9 on: April 05, 2009, 08:08:42 PM »
Ram is one of the most economical upgrades ya can get
Never underestimate the power of stupid people in large numbers

http://www.flamewarriors.net/forum/

Offline Banshee7

  • Platinum Member
  • ******
  • Posts: 6595
Re: A little help would be nice :)
« Reply #10 on: April 05, 2009, 08:58:01 PM »
Where can I buy RAM?  I wouldn't know how to install it anyway  :lol  I'm just THAT dumb
Tours 86 - 296

Offline bj229r

  • Platinum Member
  • ******
  • Posts: 6732
Re: A little help would be nice :)
« Reply #11 on: April 05, 2009, 09:33:33 PM »
Where can I buy RAM?  I wouldn't know how to install it anyway  :lol  I'm just THAT dumb
All them dogs you have are pretty smart;
Need to find out what sort ram your mb can use
Never underestimate the power of stupid people in large numbers

http://www.flamewarriors.net/forum/

Offline Banshee7

  • Platinum Member
  • ******
  • Posts: 6595
Re: A little help would be nice :)
« Reply #12 on: April 05, 2009, 10:35:01 PM »
All them dogs you have are pretty smart;
Need to find out what sort ram your mb can use


Got it all figured out now thanks to Karaya, LyeEl, and Phantomz.  Ordering 2 1GB sticks tomorrow
Tours 86 - 296

Offline Denholm

  • Plutonium Member
  • *******
  • Posts: 9667
      • No. 603 Squadron
Re: A little help would be nice :)
« Reply #13 on: April 06, 2009, 08:33:30 AM »
Just make sure you pull the old stick out. :D
Get your Daily Dose of Flame!
FlameThink.com
No. 603 Squadron... Visit us on the web, if you dare.

Drug addicts are always disappointed after eating Pot Pies.

Offline bj229r

  • Platinum Member
  • ******
  • Posts: 6732
Re: A little help would be nice :)
« Reply #14 on: April 06, 2009, 09:18:06 PM »

Got it all figured out now thanks to Karaya, LyeEl, and Phantomz.  Ordering 2 1GB sticks tomorrow
Hmpf--I said it first :noid
Never underestimate the power of stupid people in large numbers

http://www.flamewarriors.net/forum/