Author Topic: Issue with 'Frankenputer"  (Read 362 times)

Offline SKColt

  • Copper Member
  • **
  • Posts: 147
      • http://home.alltel.net/wkunkle/b17intro.html
Issue with 'Frankenputer"
« on: May 24, 2009, 12:52:00 PM »
 I threw together old parts to get an AH machine running for squaddies who are coming over for barbeque tomorrow. For an old P4 2,8 with radeon 9250 it really does not suck too bad. 1024 textures with Hi-Res pack still yields FRs in the 40s. One wierd issue though. When viewing the map, plane radar icons are all black.
When I go into Graphic detail, GUI, the Icon colors are ALL black. I can slide the color bars around, but they stay black.
 here are screen shots:



 I am running at the LCD monitors native resolution of 1440X900, 32 bit, 60hz.
 Clean XP Pro install, SP3.
 I have tried two versions of the Catalyst drivers, no Catalyst COntrol installed.
 I also purged the video8.cfg file

Here is a portion of the DX-Diag dump:
------------------
System Information
------------------
Time of this report: 5/24/2009, 12:32:14
       Machine name: WLK-2
   Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.090206-1234)
           Language: English (Regional Setting: English)
System Manufacturer: VIA Technologies, Inc.
       System Model: P4X400-8235
               BIOS: Phoenix - AwardBIOS v6.00PG
          Processor: Intel(R) Pentium(R) 4 CPU 1.80GHz
             Memory: 1024MB RAM
          Page File: 219MB used, 1474MB available
        Windows Dir: C:\WINDOWS
    DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
     DxDiag Version: 5.03.2600.5512 32bit Unicode

------------
DxDiag Notes
------------
  DirectX Files Tab: No problems found.
      Display Tab 1: No problems found.
        Sound Tab 1: No problems found.
          Music Tab: No problems found.
          Input Tab: No problems found.
        Network Tab: No problems found.

--------------------
DirectX Debug Levels
--------------------
Direct3D:    0/4 (n/a)
DirectDraw:  0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay:  0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow:  0/6 (retail)

---------------
Display Devices
---------------
        Card name: RADEON 9250
     Manufacturer: ATI Technologies Inc.
        Chip type: RADEON 9250 AGP (0x5960)
         DAC type: Internal DAC(400MHz)
       Device Key: Enum\PCI\VEN_1002&DEV_5960&SUBSYS_7C13174B&REV_01
   Display Memory: 256.0 MB
     Current Mode: 1440 x 900 (32 bit) (60Hz)
          Monitor: Plug and Play Monitor
  Monitor Max Res: 1600,1200
      Driver Name: ati2dvag.dll
   Driver Version: 6.14.0010.6614 (English)
      DDI Version: 9 (or higher)
Driver Attributes: Final Retail
 Driver Date/Size: 5/3/2006 11:51:00, 258048 bytes
      WHQL Logo'd: n/a
  WHQL Date Stamp: n/a
              VDD: n/a
         Mini VDD: ati2mtag.sys
    Mini VDD Date: 5/3/2006 11:50:42, 1540608 bytes
Device Identifier: {D7B71EE2-1A20-11CF-2D6D-195CA0C2CB35}
        Vendor ID: 0x1002
        Device ID: 0x5960
        SubSys ID: 0x7C13174B
      Revision ID: 0x0001
      Revision ID: 0x0001
      Video Accel:
 Deinterlace Caps: n/a
         Registry: OK
     DDraw Status: Enabled
       D3D Status: Enabled
       AGP Status: Not Available
DDraw Test Result: Not run
 D3D7 Test Result: Not run
 D3D8 Test Result: Not run
 D3D9 Test Result: Not run

-------------
Sound Devices
-------------
            Description: SB Live! 24-bit
 Default Sound Playback: Yes
 Default Voice Playback: Yes
            Hardware ID: PCI\VEN_1102&DEV_0007&SUBSYS_100A1102&REV_00
        Manufacturer ID: 1
             Product ID: 100
                   Type: WDM
            Driver Name: P17.sys
         Driver Version: 5.12.0001.0514 (English)
      Driver Attributes: Final Retail
            WHQL Logo'd: n/a
          Date and Size: 6/15/2007 10:47:26, 1127936 bytes
            Other Files:
        Driver Provider: CREATIVE
         HW Accel Level: Standard
              Cap Flags: 0x0
    Min/Max Sample Rate: 0, 0
Static/Strm HW Mix Bufs: 0, 0
 Static/Strm HW 3D Bufs: 0, 0
              HW Memory: 0
       Voice Management: No
 EAX(tm) 2.0 Listen/Src: No, No
   I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
               Registry: OK
      Sound Test Result: Not run

---------------------
Sound Capture Devices
---------------------
            Description: SB Live! 24-bit
  Default Sound Capture: Yes
  Default Voice Capture: Yes
            Driver Name: P17.sys
         Driver Version: 5.12.0001.0514 (English)
      Driver Attributes: Final Retail
          Date and Size: 6/15/2007 10:47:26, 1127936 bytes
              Cap Flags: 0x0
           Format Flags: 0x0

-----------
DirectMusic
-----------
        DLS Path: C:\WINDOWS\SYSTEM32\drivers\GM.DLS
     DLS Version: 1.00.0016.0002
    Acceleration: n/a
           Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
                  MPU-401, Hardware (Kernel Mode), Input, No DLS, External
                  MPU-401, Hardware (Kernel Mode), Output, No DLS, External
                  SB Live! 24-bit, Software (Kernel Mode), Output, DLS, Internal
                  Microsoft MIDI Mapper [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                  Creative SoundFont Synth [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                  MPU-401 [Emulated], Hardware (Not Kernel Mode), Output, No DLS, External
                  Microsoft GS Wavetable SW Synth [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                  MPU-401 [Emulated], Hardware (Not Kernel Mode), Input, No DLS, External
        Registry: OK
     Test Result: Not run
« Last Edit: May 24, 2009, 01:53:06 PM by SKColt »

Offline RATTFINK

  • Gold Member
  • *****
  • Posts: 3488
Re: Issue with 'Frankenputer"
« Reply #1 on: May 24, 2009, 01:02:23 PM »
Once you go... nvm  :rofl
Hitting trees since tour 78

Offline SKColt

  • Copper Member
  • **
  • Posts: 147
      • http://home.alltel.net/wkunkle/b17intro.html
Issue with 'Frankenputer"
« Reply #2 on: May 24, 2009, 01:14:53 PM »
 :lol
« Last Edit: May 24, 2009, 01:28:12 PM by SKColt »

Offline zmeg

  • Silver Member
  • ****
  • Posts: 936
Re: Issue with 'Frankenputer"
« Reply #3 on: May 24, 2009, 02:14:10 PM »


    You just need the Cat 4.11 or 4.12 drivers.

Offline Skuzzy

  • Support Member
  • Administrator
  • *****
  • Posts: 31462
      • HiTech Creations Home Page
Re: Issue with 'Frankenputer"
« Reply #4 on: May 24, 2009, 02:16:30 PM »
Catalyst 4.12 drivers are the last drivers ATI released which do not have the "black dot" bug for the 9000 series.  Every driver after that has that bug.
Roy "Skuzzy" Neese
support@hitechcreations.com

Offline SKColt

  • Copper Member
  • **
  • Posts: 147
      • http://home.alltel.net/wkunkle/b17intro.html
Re: Issue with 'Frankenputer"
« Reply #5 on: May 24, 2009, 02:52:32 PM »
Bingo!! problem solved. I downloaded and installed the 4.12 drivers. I have four squaddies coming over tomorrow for a barbeque feast, and I now the extra machine running AH just fine.

Thanks!!   :salute