« previous next »
Pages: [1] 2   Go Down

Author Topic: BACK TO SP2  (Read 810 times)

Offline falcon23

  • Silver Member
  • ****
  • Posts: 882
BACK TO SP2
« on: May 30, 2009, 08:41:20 PM »
OK..did an Fdisc on the old HDD..I am currently running SP2 ONLY...Will give it a week or 2 before moving up and updating to SP3..Want to see how the x52 runs..I.e. if it loses calibration and some other things..

 DID NOT do anything for my visual anomalies in-game though... :cry
Logged

Offline falcon23

  • Silver Member
  • ****
  • Posts: 882
Re: BACK TO SP2
« Reply #1 on: May 30, 2009, 11:08:07 PM »
OK..Anomolies have calmed down a bit..I have the CCC (ATI) enabled..tommorrow.I will try the ray adams tray tools..

 X52 did NOT uncalibrate :salute once tonight.nor did it blink...played about 4-6 hours..
Logged

Offline MrRiplEy[H]

  • Persona Non Grata
  • Plutonium Member
  • *******
  • Posts: 11633
Re: BACK TO SP2
« Reply #2 on: May 31, 2009, 02:21:03 AM »
If you are getting stuff like game anomalies and losing profiles etc. you very likely have some hardware component bad and just clinging to life.
Logged
Definiteness of purpose is the starting point of all achievement. –W. Clement Stone

Offline falcon23

  • Silver Member
  • ****
  • Posts: 882
Re: BACK TO SP2
« Reply #3 on: May 31, 2009, 12:51:14 PM »
I dont think so ripley..the build is about a year old..stable in all other ways..

My X52 has NOT uncalibrated or ONE light flickered since yesterday and being in-game for hours.the problem isnt losing profiles,the problem is like many others who use x52's...losing calibration.

I am using the CCC but will be switching to ray adams tools sometime today..
Logged

Offline falcon23

  • Silver Member
  • ****
  • Posts: 882
Re: BACK TO SP2
« Reply #4 on: May 31, 2009, 08:19:25 PM »
OK,played pretty much all day,and NOT ONE blink on the x52...ran like a champ as opposed to how it has been since updating to SP3 some time ago...actually about a year ago I believe..usually blinks quite a few times a day..

I may not go more than a week without updating to SP3,as I am pretty limited in where I can go online..Now granted,it may of been something else other than SP3 which was causing my 52 to uncalibrate.Will know in a few days when I do update to SP3..

 The game has been running pretty good.still getting polygons and black rectangles crawling along the tops of "SET" features like,hangars and town buildings,which go away and stop as I get closer to them...
Logged

Offline Masherbrum

  • Radioactive Member
  • *******
  • Posts: 22416
Re: BACK TO SP2
« Reply #5 on: May 31, 2009, 08:21:00 PM »
I've never installed SP3 and would be shocked if SP3 is your actual culprit.   

Logged
FSO Squad 412th FNVG
http://worldfamousfridaynighters.com/
Co-Founder of DFC

Offline falcon23

  • Silver Member
  • ****
  • Posts: 882
Re: BACK TO SP2
« Reply #6 on: May 31, 2009, 08:42:59 PM »
and u have  problems with an x52 uncalibrating???
Logged

Offline Masherbrum

  • Radioactive Member
  • *******
  • Posts: 22416
Re: BACK TO SP2
« Reply #7 on: May 31, 2009, 08:46:19 PM »
I used to have an X52 and now have a CH Fighterstick.   I'll never recommend Saitek products to anyone.   It's probably your pots on the stick that are dirty.   My stick didn't last 6 months before the throttle axis was broken, buttons (trigger included) stopped working.   
Logged
FSO Squad 412th FNVG
http://worldfamousfridaynighters.com/
Co-Founder of DFC

Offline Getback

  • Platinum Member
  • ******
  • Posts: 6456
Re: BACK TO SP2
« Reply #8 on: May 31, 2009, 10:58:54 PM »
Quote from: Masherbrum on May 31, 2009, 08:46:19 PM
I used to have an X52 and now have a CH Fighterstick.   I'll never recommend Saitek products to anyone.   It's probably your pots on the stick that are dirty.   My stick didn't last 6 months before the throttle axis was broken, buttons (trigger included) stopped working.   


ditto.
Logged

  Created by MyFitnessPal.com - Free Calorie Counter

Offline Tigger29

  • Gold Member
  • *****
  • Posts: 2568
Re: BACK TO SP2
« Reply #9 on: May 31, 2009, 11:04:06 PM »
The only pot on the X52 is the twisty rudder control.  Everything else is controlled with optical sensors.

While I've heard of a few people with calibration issues on these, I personally have only calibrated my stick twice.  The first when I installed it almost two years ago, and the second after I reinstalled Windows 5 months ago.

This is with XP Professional, 32 bit using a powered USB hub.

I have heard that some people have problems with the cable coming slightly unplugged at the back of the stick or throttle, although that's never been an issue for me...
Logged

Offline Masherbrum

  • Radioactive Member
  • *******
  • Posts: 22416
Re: BACK TO SP2
« Reply #10 on: May 31, 2009, 11:11:42 PM »
Quote from: Tigger29 on May 31, 2009, 11:04:06 PM
The only pot on the X52 is the twisty rudder control.  Everything else is controlled with optical sensors.

While I've heard of a few people with calibration issues on these, I personally have only calibrated my stick twice.  The first when I installed it almost two years ago, and the second after I reinstalled Windows 5 months ago.

This is with XP Professional, 32 bit using a powered USB hub.

I have heard that some people have problems with the cable coming slightly unplugged at the back of the stick or throttle, although that's never been an issue for me...

On the X52 Pro.   Not the "x52" as he stated.   
Logged
FSO Squad 412th FNVG
http://worldfamousfridaynighters.com/
Co-Founder of DFC

Offline froger

  • Silver Member
  • ****
  • Posts: 838
Re: BACK TO SP2
« Reply #11 on: June 03, 2009, 01:31:06 AM »
Quote from: Masherbrum on May 31, 2009, 08:46:19 PM
I used to have an X52 and now have a CH Fighterstick.   I'll never recommend Saitek products to anyone.   It's probably your pots on the stick that are dirty.   My stick didn't last 6 months before the throttle axis was broken, buttons (trigger included) stopped working.   



How do you like the CH stick mashburn and witch model do you have?
 I have almost always used a Xtreem 3d pro.....
there cheap and work pretty well but i am tempted by the CH.

I wont put the green out for an X52....
2 reasons.....looks like cheap krap
and i always hear bad things...


>S<
froger
Logged
frogs are people too

Offline Masherbrum

  • Radioactive Member
  • *******
  • Posts: 22416
Re: BACK TO SP2
« Reply #12 on: June 03, 2009, 08:38:55 AM »
I'm pissed I never went to this stick sooner.   :rock  After going through 3 X45's in 3 years and the X52, this stick has been great!
Logged
FSO Squad 412th FNVG
http://worldfamousfridaynighters.com/
Co-Founder of DFC

Offline falcon23

  • Silver Member
  • ****
  • Posts: 882
Re: BACK TO SP2
« Reply #13 on: June 03, 2009, 03:23:44 PM »
OK..update ...

 Since I went back to SP2 on windows XP,have not had one light even try to flicker..been rock solid.."KNOCK ON WOOD"...

 I will be installing SP3 in the next day or so,and will let you know what comes of it..

 I was having flicker EVERYDAY,and calibration issues everyday..Even when I F-disced about 6 months ago,installed SP3,installed x52,within 24 hours,calibration issues..This time I have waited and no calibration issues what-so-ever...
Logged

Offline falcon23

  • Silver Member
  • ****
  • Posts: 882
Re: BACK TO SP2
« Reply #14 on: June 04, 2009, 10:05:27 PM »
OK..loaded up SP3,wont be able to play until tommorrow,will post tommorrow night about how it went as far as the x52
Logged
Pages: [1] 2   Go Up
« previous next »