Author Topic: Which DX version of AH III to run?  (Read 1196 times)

Offline fuzeman

  • Aces High CM Staff
  • Plutonium Member
  • *******
  • Posts: 8913
Which DX version of AH III to run?
« on: September 10, 2016, 02:50:16 PM »
I started running beta with the DX9 version but with III out I had been running DX11 version.
I tried running a DX 11 benchmark and it responded with a message:
"3DMark 11 has found DirectX 11 system files, but your graphics adapter reports that it supports only Direct X 10_1.

3DMark 11 requires both DirectX 11 system files and DirectX 11 capable hardware to run. If you are certain that you have DirectX 11 hardware present, there may be a problem with your video drivers. See 3DMark 11 FAQ for more information."

It got me a wondering. Should I run the DX11 version or DX9?
ATI Radeon HD 3800 Series
Far too many, if not most, people on this Board post just to say something opposed to posting when they have something to say.

"Masters of the Air" Scenario - JG54

Offline Bizman

  • Plutonium Member
  • *******
  • Posts: 9553
Re: Which DX version of AH III to run?
« Reply #1 on: September 10, 2016, 02:57:58 PM »
The HD 3800 series only supports DirectX 10 as the highest version, so logically the DX9 game should be the better alternative for you.
Quote from: BaldEagl, applies to myself, too
I've got an older system by today's standards that still runs the game well by my standards.

Kotisivuni

Offline FLS

  • AH Training Corps
  • Plutonium Member
  • *******
  • Posts: 11603
      • Trainer's Website
Re: Which DX version of AH III to run?
« Reply #2 on: September 10, 2016, 03:06:49 PM »
How do the 2 versions compare in visual quality and framerate?

Offline Bizman

  • Plutonium Member
  • *******
  • Posts: 9553
Re: Which DX version of AH III to run?
« Reply #3 on: September 10, 2016, 03:18:15 PM »
How do the 2 versions compare in visual quality and framerate?

DX11 uses more advanced techniques for transform and lighting or whatever it's currently called. Basically it means that you'd get fancier graphics at the same frame rate or similar graphics at a higher frame rate. The math isn't that straightforward, though, there's other variables to take into account. In any case, AH3 looks better than AH2 no matter how low you have to cut your settings.
Quote from: BaldEagl, applies to myself, too
I've got an older system by today's standards that still runs the game well by my standards.

Kotisivuni

Offline fuzeman

  • Aces High CM Staff
  • Plutonium Member
  • *******
  • Posts: 8913
Re: Which DX version of AH III to run?
« Reply #4 on: September 10, 2016, 06:07:26 PM »
How do the 2 versions compare in visual quality and framerate?

Initial impression from a flight or three it seems my FR is up, DX11 35-44ish , DX9 mid 50s.
Didn't notice the explosions or graphics much, I think it might be a bit better in DX11 but again so far just a guess.
Far too many, if not most, people on this Board post just to say something opposed to posting when they have something to say.

"Masters of the Air" Scenario - JG54

Offline FLS

  • AH Training Corps
  • Plutonium Member
  • *******
  • Posts: 11603
      • Trainer's Website
Re: Which DX version of AH III to run?
« Reply #5 on: September 10, 2016, 06:17:21 PM »
I would go with the higher framerate.

Offline Skuzzy

  • Support Member
  • Administrator
  • *****
  • Posts: 31462
      • HiTech Creations Home Page
Re: Which DX version of AH III to run?
« Reply #6 on: September 11, 2016, 05:56:28 AM »
The DX11 version of Aces High III uses shaders which are compatible with video cards supporting DX10 and later.
Roy "Skuzzy" Neese
support@hitechcreations.com

Offline 8thJinx

  • Silver Member
  • ****
  • Posts: 990
Re: Which DX version of AH III to run?
« Reply #7 on: September 11, 2016, 06:22:37 AM »
I've played both versions.  I took a screen shot from each, looking at the same terrain.  There is a difference, but it's not like it's DX9 bad vs DX11 good.  It's more like comparing the same model car with different engines.   
Join Date: Nov 2012

B-24H Liberator SN 294837-T, "The Jinx", 848th BS, 490th BG, 8th AF, RAF Station Eye, delivered 1943.  Piloted by Lt. Thomas Keyes, named by by his crew, and adorned with bad luck symbols, the aircraft survived the entire war.

Offline fuzeman

  • Aces High CM Staff
  • Plutonium Member
  • *******
  • Posts: 8913
Re: Which DX version of AH III to run?
« Reply #8 on: September 11, 2016, 04:00:52 PM »
<snip> It's more like comparing the same model car with different engines.   
Can't post a pic but it's in this thread, my vehicle is a 1994 Plymouth Voyager SE  so vehicle comparisons might be the wrong avenue for a message
 http://bbs.hitechcreations.com/smf/index.php/topic,380297.0.html

I'll probably use both,
DX 9 for a fast frame rate and I want to  :airplane:   :joystick:
and DX11 with  :cool: and I want the few bells and whistles I can see and hear.   :O :old:
Far too many, if not most, people on this Board post just to say something opposed to posting when they have something to say.

"Masters of the Air" Scenario - JG54

Offline Vulcan

  • Plutonium Member
  • *******
  • Posts: 9853
Re: Which DX version of AH III to run?
« Reply #9 on: September 15, 2016, 04:43:47 PM »
Also if you want VR you need DX11.

Offline pembquist

  • Silver Member
  • ****
  • Posts: 1928
Re: Which DX version of AH III to run?
« Reply #10 on: September 17, 2016, 09:39:08 PM »
Dxdiag says I have directX 11. AH3-9 Runs AH3-11 crashes when you select offline or online.
Pies not kicks.

Offline Skuzzy

  • Support Member
  • Administrator
  • *****
  • Posts: 31462
      • HiTech Creations Home Page
Re: Which DX version of AH III to run?
« Reply #11 on: September 18, 2016, 05:53:44 AM »
Dxdiag says I have directX 11. AH3-9 Runs AH3-11 crashes when you select offline or online.

Usually means either the video card driver does not support DX11, or the video card itself is not DX11 capable.
Roy "Skuzzy" Neese
support@hitechcreations.com