Author Topic: Need Mobo Abvice  (Read 245 times)

Offline Wotan

  • Platinum Member
  • ******
  • Posts: 7201
Need Mobo Abvice
« on: May 13, 2002, 01:28:38 PM »
Need a quality mobo for a AMD XP 2100+. Been reading lots of stuff but any advice would be nice.

Also ram advice as well. I am interested in quality more then price.

was thinking Corsair CMX PC2700 CAS-2.

Anyway thanks in advance

Offline Tumor

  • Platinum Member
  • ******
  • Posts: 4273
      • Wait For It
Need Mobo Abvice
« Reply #1 on: May 15, 2002, 01:05:21 AM »
Just my opinion but I'd go SiS long before I'd build anything with a VIA chipset.

Corsair is good RAM
"Dogfighting is useless"  :Erich Hartmann

Offline Lephturn

  • Silver Member
  • ****
  • Posts: 1200
      • http://lephturn.webhop.net
Need Mobo Abvice
« Reply #2 on: May 15, 2002, 08:05:10 AM »
Personally, I'm giving nForce a shot.  I like the built-in sound that's decent quality and the lowest CPU utilization I've seen along with built-in network.  Plus, I'm betting it will not have any conflict issues with an nVidia video card. :)

Not what you want if you plan to OC though.

Offline Puck

  • Gold Member
  • *****
  • Posts: 2980
Need Mobo Abvice
« Reply #3 on: May 15, 2002, 08:08:46 AM »
I'm using a Soyo K7V Dragon+ (VIA chipset) and loving it.  Should be putting a GeForce 4 Ti4600 in it next week sometime, and adding another 512M of RAM in the next couple days.

Runs like a charm.

YMMV, of course.
//c coad  c coad run  run coad run
main (){char _[]={"S~||(iuv{nkx%K9Y$hzhhd\x0c"},__
,___=1;for(__=___>>___;__<((___<<___<<___<<___<<___
)+(___<<___<<___<<___)-___);__+=___)putchar((_[__
])+(__/((___<<___)+___))-((___&

Offline flakbait

  • Silver Member
  • ****
  • Posts: 867
      • http://www.worldaccessnet.com/~delta6
Need Mobo Abvice
« Reply #4 on: May 16, 2002, 12:50:34 AM »
I recently slapped a new rig together using an MSI K7T266 Pro2 mobo and it screams. It's a good board, will take an XP 1800+ right out of the box (2000+ w/BIOS flash), and 3 gigs of DDR. My sole gripe, aside from the AC97 audio, is the board's intelligence. I had to plug everything in, boot it up, let Winblows try figuring out everything and fail, then shut down, unplug and replug everything, reboot, and THEN it worked. While it may be an older board (2001 model), the thing just runs right along. I dropped a 900MHZ T-bird along with a 128 meg stick of Samsung DDR (PC2700) in it. It comes with a D-bracket (diagnostic lights) that has two USB 1.1 jacks built-in, plus the two on the board itself. Just don't use the built-in audio, or the gameport; both of 'em have an attitude. Especially when you *cough* accidently install the wrong driver. Things get to sounding strange in a hurry!


-----------------------
Flakbait [Delta6]
Delta Six's Flight School
Put the P-61B in Aces High
"For yay did the sky darken, and split open and spew forth fire, and
through the smoke rode the Four Wurgers of the Apocalypse.
And on their canopies was tattooed the number of the Beast, and the
number was 190." Jedi, Verse Five, Capter Two, The Book of Dweeb