Switching over to rudder pedals

[dracon]

Try this!  When you set up your Peds...I use the CH Pro, change the response cure to look like a "V".
Here's a copy of my "stick.cfg"

0,32767,65535,0.150000,0.162000,0
0,31955,65535,0.112000,0.144000,0
0,31999,65535,0.071000,0.082000,0
0,65535,65535,0.000000,0.000000,0
0,0,65535,0.050000,0.100000,0
0,0,65535,0.050000,0.100000,0
0,0,65535,0.050000,0.100000,0
0,0,65535,0.050000,0.100000,0
0,0,65535,0.050000,0.100000,0
0,0,65535,0.050000,0.100000,0
0,0,65535,0.050000,0.100000,0
0,0,65535,0.050000,0.100000,0
0,0,65535,0.050000,0.100000,0
0,0,65535,0.050000,0.100000,0
0,0,65535,0.050000,0.100000,0
1.00,1.00,1.00,1.00,1.00,1.00,1.00,1.00,1.00,1.00 - ROLL
0.15,0.20,0.26,0.32,0.40,0.47,0.55,0.66,0.78,0.95 - PITCH
1.00,0.90,0.77,0.64,0.50,0.50,0.65,0.78,0.89,1.00 - RUDDER

I use a bit of dampening and a bit of deadband say 10% or less.

Works for me!  Good luck

[brendo]

Set the rudder config to very low input %

ie

10    2
20    4
30    8
40    12
50    25
60    35
70     45
80     65
90     80
100   100


This ensures that you dont overcorrect with minor rudder inputs.

[beet1e]

Pedals are for real pilots in real planes.

For PC gamers there are twisty sticks, with optional pedals for pilot wannabes.

[LLv34 Jarsci]

Originally posted by beet1e
Pedals are for real pilots in real planes.

For PC gamers there are twisty sticks, with optional pedals for pilot wannabes.

You got it right!!

I got pilots licence and ,as I mentioned earlier , theres no way those plastic paddles can imitate the real feel of rudders.

Its really important to feel the airflow, for example when making hammerheads. Limp response when applying rudder  = too slow too late --> tail slide....

[SunKing]

When switching from the twisty sticks to pedals an easy way to see the improvement is your hit %. It will almost double.  I suggest them to everyone serious about AH.