Author Topic: X-52 USERS WITH PROBLEMS  (Read 2217 times)

Offline Tmac7

  • Copper Member
  • **
  • Posts: 343
Re: X-52 USERS WITH PROBLEMS
« Reply #30 on: February 01, 2009, 03:16:44 PM »
ok mine got WAY WORSE.
Member of ****ALCHEMIST****

"E Tan Epi Tan"
Proud United States Marine

Offline falcon23

  • Silver Member
  • ****
  • Posts: 882
Re: X-52 USERS WITH PROBLEMS
« Reply #31 on: February 01, 2009, 05:18:33 PM »
what did you do tmac???

Offline Tmac7

  • Copper Member
  • **
  • Posts: 343
Re: X-52 USERS WITH PROBLEMS
« Reply #32 on: February 01, 2009, 08:29:21 PM »
I went into advance and enabled X and Y axis and it got worse. And it was doing 360 turns. Its only the X axis.
Member of ****ALCHEMIST****

"E Tan Epi Tan"
Proud United States Marine

Offline bongaroo

  • Silver Member
  • ****
  • Posts: 1822
Re: X-52 USERS WITH PROBLEMS
« Reply #33 on: February 02, 2009, 09:19:20 AM »
I went into advance and enabled X and Y axis and it got worse. And it was doing 360 turns. Its only the X axis.

So you went in and turned on scaled axis control?  did you play with the sliders?
Callsign: Bongaroo
Formerly: 420ace


Offline Tmac7

  • Copper Member
  • **
  • Posts: 343
Re: X-52 USERS WITH PROBLEMS
« Reply #34 on: February 02, 2009, 10:10:56 AM »
No I did that before and it just made me bad at turning it didnt help. Even when it isn't moving due to the bad calibration it still shows the numbers bouncing from 2500 to 3676
Member of ****ALCHEMIST****

"E Tan Epi Tan"
Proud United States Marine

Offline Kaw1000

  • Silver Member
  • ****
  • Posts: 1159
Re: X-52 USERS WITH PROBLEMS
« Reply #35 on: February 04, 2009, 06:35:08 PM »
Hey Guys,
 I am having problems with the two hat switches on the stick of the X-52. when I use them in the game,
the view sticks to the right. When I go to windows/gamecontrolers/propertys the hat switches are screwed up there also.
I tryed to uninstalling all drivers and did new drivers and it didn't help. Any advice? tryed to E-mail saitek with no response.
See Rule# 5 on just about every thread!

Offline bongaroo

  • Silver Member
  • ****
  • Posts: 1822
Re: X-52 USERS WITH PROBLEMS
« Reply #36 on: February 05, 2009, 09:23:49 AM »
::edit::

wrong thread     :D
Callsign: Bongaroo
Formerly: 420ace


Offline The Fugitive

  • Plutonium Member
  • *******
  • Posts: 17933
      • Fugi's Aces Help
Re: X-52 USERS WITH PROBLEMS
« Reply #37 on: February 05, 2009, 09:33:08 AM »
Hey Guys,
 I am having problems with the two hat switches on the stick of the X-52. when I use them in the game,
the view sticks to the right. When I go to windows/gamecontrolers/propertys the hat switches are screwed up there also.
I tryed to uninstalling all drivers and did new drivers and it didn't help. Any advice? tryed to E-mail saitek with no response.

sounds like a stuck switch. Two thinks to try, blast it with a can of compressed air, might knock the crap out of it that is causing it to stick. Second thing is to blast it with a can of "contact/electronic cleaner. RadioShack use to carry it. Its a cleaning solution that doesn't conduct electricity and in a can is under pressure. Think of it like a can of WD40, it will get into all those little cracks and stuff to help clean it out DON"T USE WD 40 !!! Spray the cleaner, then work the sticky button for a minute or two, in and out over and over. Could clear it up.

If it still hangs up, you'll need to replace the switch.

Offline Kaw1000

  • Silver Member
  • ****
  • Posts: 1159
Re: X-52 USERS WITH PROBLEMS
« Reply #38 on: February 05, 2009, 03:19:05 PM »
Thanks Fugitive...I'll try it!! Need to get to radio shack anyway...will pick some up!
See Rule# 5 on just about every thread!