Author Topic: x52 problems  (Read 396 times)

Offline lazydog

  • Copper Member
  • **
  • Posts: 348
x52 problems
« on: January 31, 2009, 01:51:07 PM »
just wondering is it possible to use my throttle controls from the x52 with a different stick i was thinking of getting the ave8ter till i can get a ch stick?

Offline The Fugitive

  • Plutonium Member
  • *******
  • Posts: 18287
      • Fugi's Aces Help
Re: x52 problems
« Reply #1 on: January 31, 2009, 11:21:34 PM »
as long as the throttle only has the one USB plug and doesn't go through the stick, you should be ok.

Offline potsNpans

  • Nickel Member
  • ***
  • Posts: 708
Re: x52 problems
« Reply #2 on: February 01, 2009, 10:59:32 AM »
I concur with Fugitive. Past X-52 stick went bad so I used X-52 throttle segment with an STP 290 stick.

Offline Eagler

  • Plutonium Member
  • *******
  • Posts: 18850
Re: x52 problems
« Reply #3 on: February 03, 2009, 07:17:59 AM »
as long as the throttle only has the one USB plug and doesn't go through the stick, you should be ok.

?

you just put the jstick of the x52 hotas to the rear and program/use the other jstick while using the throttle from the x52.
this works fine when you use the stick programming inside AH.
"Masters of the Air" Scenario - JG27


Intel Core i7-13700KF | GIGABYTE Z790 AORUS Elite AX | 64GB G.Skill DDR5 | 16GB GIGABYTE RTX 4070 Ti Super | 850 watt ps | pimax Crystal Light | Warthog stick | TM1600 throttle | VKB Mk.V Rudder

Offline The Fugitive

  • Plutonium Member
  • *******
  • Posts: 18287
      • Fugi's Aces Help
Re: x52 problems
« Reply #4 on: February 03, 2009, 08:03:31 AM »
?

you just put the jstick of the x52 hotas to the rear and program/use the other jstick while using the throttle from the x52.
this works fine when you use the stick programming inside AH.

some throttle units connect to the stick also, so if you take the "partnering" stick out of the circuit, the throttle won't work.