Oldman, did they say what the feet on floor reason was? Is it possible it was heals on floor?
Machado says:
"The “thinking” behind this technique is that a pilot is less likely to skid the airplane (and potentially induce a spin) if only aileron is used to make turns in the pattern. Yes, he or she will certainly slip during turns and slips are far less conducive to spinning. Believing this technique makes a pilot safer, however, is like believing that Washington, D.C., runs on batteries. The problem with this type of thinking is that there is actually very little thinking taking place."
And he continues:
"Think about this. Without compensating for the airplane’s power-induced left turning tendency on climbout, the nose yaws and the airplane begins a roll to the left. Adding right aileron (and no right rudder) to stop the left roll yaws the nose further left, initially inducing a skid, not a slip. It’s clear that some pilots are completely unaware that they’ve lost their stick-and-rudder skills when they must rely on the Coriolis force to keep their airplanes aligned with the runway centerline on climbout.
No, we should not keep our feet on the floorboard during pattern operations, or when maneuvering an airplane. Then again, unless we know what we’re missing, we simply won’t miss it when it’s gone..."
Heels-on-the-floor is something we all were taught to do on takeoff, so as not to accidentally hit one or both brakes as the plane accelerates.
- oldman